RLS-401 Installation Instructions
Model: RLS-401 | Issue: 1 | Date: 07-08-2020
Parts List
Base: x1
Self tapping screw: No. 4 X 20, x4
Tools Required
- Ø2.5mm (3/32") Drill Bit
- Pozi Screwdriver
- Silicone applicator
Installation Steps
Step 1: Positioning
Place the ROKK Body base in the desired location. Ensure it is positioned away from any objects that could obstruct the movement or removal of the ROKK Body. Mark the fixing positions on the surface.
Step 2: Pilot Holes
Drill pilot holes according to the material being used. The diagram shows a drill bit creating pilot holes on a surface.
| Material | Drill Bit Size |
|---|---|
| Soft Material (e.g. plywood) | 2.5mm (3/32") |
| Hard Material (e.g. fiberglass, acrylic, hardwoods) | 3mm (1/8") |
Step 3: Securing the Base
Apply silicone sealant to the base or surface as needed. Align the base with the pilot holes and secure it using the self-tapping screws. The diagram illustrates screws being inserted into the base and sealant being applied.
Contact & Support
Share your installation with us.
? ? ? ? ▶️
Follow us: @scanstrut
UK & International:
+44 (0)1392 531280
sales@scanstrut.com
USA:
+1 860 308 1416
usasales@scanstrut.com
For further installation and warranty information please visit:www.scanstrut.com
