Stealth Designer 36000 BTU Slim Duct Heat Pump System

Submittal Data: SC-36CD-UM / SC-36Z-UM

General Features

Multi-Speed Fan
Medium Static Pressure Capability
Return Air From Rear Only
Internal Condensate Drain Pump
Sentry Condensate Overflow Protection
Wired Remote Controllers
Acrylic Resin/Anti-Corrosion Fin Coating

System Ratings

Cooling

Rated Capacity	34000 BTU/H
Capacity Range	10800-39000 BTU/H
Power Input (Max)	4500 W
SEER	16.0
EER	10.4

Heating at 47° F

Rated Capacity	41000 BTU/H
Capacity Range	9800-49500 BTU/H
Power Input (Max)	4600 W
HSPF	9.0
COP	3.2

Heating at 17° F

Rated Capacity

24600 BTU/H

Operating Range

Cooling (Max)	118°F (48°C)
Cooling (Min)	0°F (-18°C)
Heating (Max)	75°F (24°C)
Heating (Min)	0°F (-18°C)

Refrigerant Piping Data

Gas Pipe Size (OD)	5/8-in
Liquid Pipe Size (OD)	3/8-in
Connection Method	Flared
Factory Charge	123.2 oz
Additional Charge	0.6 oz/ft
Pre-Charge Length	25-ft
MAX Refrigerant Pipe Length	164-ft
MIN Refrigerant Pipe Length	10-ft
MAX Refrigerant Pipe Elevation	49-ft

Indoor Unit Data

Feature	Value
Fan Motor Output Power	249 W
FLA	2.1 A
Airflow Cooling Wet (Lo/Hi)	950/1175 CFM
Airflow Heating Dry (Lo/Hi)	950/1175 CFM
Sound Power Level Cooling (Min/Max)	44/52 dB(A)
Sound Power Level Heating (Min/Max)	44/52 dB(A)
Dehumidification	1.28 pt/hr
Condensate Drain Lift (Height)	33-in
Power Supply (Dedicated Circuit: Size Per Local Code)	208/230 V, 1 Phase, 60 Hz
Voltage Range	187-253 V
MCA	3 A
MOCP/Breaker Size	15A
Communication Wire Size	18-2 AWG / 300V THHN

Outdoor Unit Data

Feature	Value
Compressor	DC Inverter Driven Rotary
RLA	21.2 A
Refrigerant Type	R410A
Fan Motor Output Power	2/9HP
FLA	2.0 A
Sound Power Level Cooling/Heating	63/63 dB(A)
Power Supply (Dedicated Circuit)	208/230 V, 1 Phase, 60 Hz
Normal Operational Voltage	187-253 V
Main Supply Wire Size	8 AWG
MCA	27.7 A
MOCP/Breaker Size	45 A

Features & Function Summary

System Features

Feature	Status
Inverter Type	G10
Ultra Low Frequency Torque Control	YES
Power Factor Correction	YES
Compressor Type	Rotary
Refrigerant Type	R410A
Basepan With Electric Heater	YES
Compressor With Electric Heater	NO
Outdoor Fin Coating	Acrylic Resin
Intelligent Defrosting	YES
Intelligent Preheating	YES
Low Voltage Startup	YES
Memory/Power Failure Recovery	YES
Self Diagnosis	YES
Low Ambient Cooling	YES
Internal Condensate Pump	YES
XK60 Wired Controller Interface	YES
Wi-Fi Interface	NO
Indoor Fan Type	Centrifugal
Multi Fan Speeds	3 Speeds
LED Display Indoor Unit	NO
Advance Filter	NO
Auxiliary Electrical Heater	NO
Ventilation (Outdoor Air)	Optional

Wired Controller Functions

Function	Status
Auto Mode	YES
Auto Fan	YES
Auto Swing (Continuous Sweep)	NO
Adjustable Swing Louvers (5 pos.)	NO
Clock on Remote Controller	YES
Dry Mode	YES
Dry Anti-Mildew (X-Fan) Mode	YES
Energy Saving Mode	NO
Dirty Filter Alert	NO
I Feel Function	YES
Lock on Wired Controller	YES
Quiet Mode	NO
Room Temperature Display (5 sec.)	YES
Sleep Mode	YES
Timer Mode	YES
Turbo Mode	YES
Display On/Off Control	NO
Freeze Guard Mode	YES

Performance Data

Fan Performance Curves

This section describes the relationship between Air Flow Volume (CFM) and External Static Pressure (InWa) for different fan speeds:

Super high speed: Shows the highest airflow volume across the tested static pressure range.
High speed: Offers slightly lower airflow than super high speed.
Middle speed: Provides a moderate airflow volume.
Low speed: Delivers the lowest airflow volume.

The curves generally show a decrease in airflow volume as external static pressure increases for all speeds.

Cooling Performance

This graph illustrates the cooling capacity (BTU) of the unit at various outdoor dry bulb temperatures (°F). The capacity generally increases as the outdoor temperature rises from 68°F to 95°F, peaking around 95°F, and then slightly decreases at 104°F and 113°F.

Heating Performance

This graph shows the heating capacity (BTU) of the unit at various outdoor dry bulb temperatures (°F). The capacity increases significantly as the outdoor temperature rises from 14°F to 50°F.

Minimum Spacing Requirements

Indoor Unit

Diagram shows the indoor unit mounted to a ceiling. Minimum clearances are indicated:

Sides: Greater than 12 inches (305 mm) from walls.
Front/Bottom: Greater than 72 inches (2195 mm) clearance.

Outdoor Unit

Diagram shows the outdoor unit with required clearances for airflow:

Sides: Greater than 20 inches (500 mm) from obstructions.
Front: Greater than 40 inches (1000 mm) from obstructions.
Rear Inlet: Greater than 20 inches (500 mm) from obstructions.
Rear Discharge: Greater than 80 inches (2000 mm) from obstructions.

Dimensional Specifications

Indoor Unit Dimensions & Weights

The indoor unit has the following dimensions (referencing labels A-J):

Label	Dimension (inch/mm)
A	39.75 (1011)
B	29.5 (748)
C	32.25 (820)
D	43.875 (1115)
E	48.25 (1226)
F	30.5 (775)
G	38.5 (979)
H	6.25 (160)
I	9.125 (231)
J	11.375 (290)

Net Weight: 101.2 lbs

Shipping Weight: 116.6 lbs

Refrigerant Line Connections:

Liquid Line Valve: 3/8-in OD Flared
Gas Line Valve: 5/8-in OD Flared
Drain Connector: 13/16 in OD

Notes:

Refrigerant line sizes are based on evaporator port sizes.
Refrigerant and Drain pipe configurations vary by unit size.
Pump Drain outlet is positioned above the gravity drain outlet.

Outdoor Unit Dimensions & Weights

The outdoor unit has the following dimensions (referencing labels A-E):

Label	Dimension (inch/mm)
A	43.625 (1107)
B	17.375 (440)
C	43.25 (1100)
D	24.875 (631)
E	15.75 (400)

Net Weight: 204.6 lbs

Shipping Weight: 222.2 lbs