Ingenuity Keep Cozy 3-in-1 Grow With Me Bounce & Rock Seat - Madi™

Important Safety Information

WARNING

Read all instructions carefully and keep for future reference.

General Safety Precautions

To Prevent Falls and Suffocation:

• Bouncer Mode: Always use restraints and adjust to fit snugly. Stop use when baby starts trying to sit up or reaches 20 lb (9 kg), whichever comes first.
• Rocker Mode: Always use the restraint system, adjusted snugly. Stop use when the child tries to stand up and can climb in/out of the rocker. Stop use when baby reaches 40 lb (18 kg). The reclined position is for infants who cannot sit upright unassisted (up to 20 lbs/9 kg). Stop using reclined position when baby starts trying to sit up. The upright position is for children with sufficient upper body control to sit up without tipping forward.
• Any Mode: NEVER leave the child unattended. Do NOT use on elevated surfaces (e.g., tables); ONLY use on the floor. DO NOT move or lift the product with the baby inside. Never use the toy bar as a handle. DO NOT place near windows where a child could use it as a step to fall out. Be aware of fire and heat sources. DO NOT place near windows where blind/curtain cords could cause strangulation.
• Suffocation Hazard: NEVER use on beds, sofas, cushions, or other soft surfaces. Stay near and watch the baby during use. This product is not safe for sleep or unsupervised use. If the baby falls asleep, move them to a firm, flat sleep surface (crib or bassinet) as soon as possible. Never let the child sleep in this product.
• Additional Precautions: NEVER use as an infant carrier for automobile or airline travel. NEVER attach additional strings or straps to the product or toy bar.

IMPORTANT:

• Adult assembly required.
• Please read all instructions before assembly and use.
• Exercise caution during unpacking and assembly.
• Examine product frequently for damaged, missing, or loose parts. DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
• This product does not replace a cot or crib. If the child falls asleep, move them to a suitable cot or crib.

Care and Cleaning

• Seat Pad/Bolster/Headrest: Remove from frame. Fasten buckles and hook-and-loop patches. Machine wash cold, gentle cycle. No bleach. Tumble dry low heat.
• Toy Bar and Toys: Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
• Frame: Wipe with a soft, clean cloth and mild soap.

Battery Information

The vibration unit requires (1) C/LR14 (1.5V) alkaline battery (not included).

CAUTION: Follow battery guidelines to prevent shortened battery life, leaks, or rupture. To prevent battery leaks (which can burn skin/eyes):

• Keep batteries away from children.
• Never mix old/new, different brands, or types of batteries.
• Always replace the entire set of batteries at once.
• Do not mix alkaline, standard, or rechargeable batteries.
• Use only recommended or equivalent battery types.
• Install batteries with correct polarity matching compartment markings.
• Do not short-circuit batteries.
• Do not store batteries in extreme temperatures (attics, garages, cars).
• Remove exhausted batteries promptly.
• Never attempt to recharge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries require adult supervision.
• Dispose of used batteries immediately using the correct method.
• Remove batteries before long-term storage.
• Weak batteries cause erratic operation (distorted sound, dim lights, slow/non-working motorized parts). Replace batteries when any function fails.
• Do not dispose of product or batteries in fire; they may explode or leak.
• The symbol ♻️ indicates that batteries should not be disposed of in household waste due to environmental/health risks. Contact local authorities for recycling information.

Parts List

Assembly Instructions

Follow these steps to assemble the Ingenuity Keep Cozy 3-in-1 Grow With Me Bounce & Rock Seat:

1. Step 1: Attach the toy bar assembly (1) to the side supports (8, 9). Connect the backrest tube (6) to the seat frame (4). Attach the kickstand frame (7) to the base frame tube (10).
2. Step 2: Connect the right leg support (9) and left leg support (8) to the seat frame (4).
3. Step 3: Assemble the main frame by connecting the seat frame (4) to the base frame tubes (10) and leg supports (8, 9).
4. Step 4: Secure the backrest tube (6) to the seat frame (4) using the provided connectors.
5. Step 5: Install the vibration unit (11). Open the battery compartment cover, insert one C/LR14 (1.5V) battery observing polarity, and close the cover.
6. Step 6: Attach the vibration unit (11) to the seat frame.
7. Step 7: Complete the main frame assembly by connecting all tubes and supports, securing them with screws as indicated (e.g., x2, x3).
8. Step 8: Attach the toy bar assembly (1) to the main frame.
9. Step 9: Secure the seat pad/bolster (5) to the seat frame (4) using the buckles and hook-and-loop fasteners. Adjust the seat restraint system (harness) to fit the baby snugly.

Using the Seat Restraint

Ensure the harness buckles are fastened and the straps are adjusted snugly for a secure fit. The diagrams illustrate how to connect the buckle parts and tighten the straps for optimal safety.

Using the Recline Function

The recline function allows adjustment of the seat's backrest angle to suit the baby's comfort and developmental stage. The diagram shows how to operate the adjustment mechanism.

Mode Transitions

This seat can be used in two primary modes:

• Bouncer Mode: The base is configured for bouncing motion. The diagrams show how to fold the base supports to enable bouncing.
• Rocker Mode: The base is configured for rocking motion. The diagrams show how to adjust the base supports to enable rocking.

Using the Vibration Unit

The vibration unit provides soothing vibrations for the baby. It is operated by an ON/OFF button, typically located on the unit itself. The diagram shows the location of this control.

Removing the Seat Pad

The seat pad, bolster, and headrest can be removed for cleaning. The diagram illustrates the process of detaching the seat pad from the main frame.