Important Safety Information
⚠️ WARNING
Fall Hazard
Children have suffered head injuries falling from rockers. To prevent falls:
- Never leave the child unattended.
- Always use the restraint system. Adjust to fit snugly.
- Stop using the restraint system once the child tries to stand up and is able to climb in and out of the rocker.
- Do not move or lift this product with the baby inside. Never lift product using a toy bar as a handle.
- Never place a child over 40 lb (18 kg) in the product.
- The reclined position is only for children who cannot sit upright unassisted (until 20 lb or 9 kg). Stop using reclined position when baby starts trying to sit up.
- The upright position is only for children who have developed enough upper body control to sit up without tipping forward.
- Never use this product on an elevated surface (e.g., a table). Always use on the floor.
- Do not place this product near a window, as it can be used as a step by the child and cause the child to fall out of the window.
- Be aware of the risk of open fires and other sources of strong heat in the vicinity of the product.
- Do not place this product near a window where cords from blinds or curtains could strangle a child.
Suffocation Hazard
Babies have suffocated when seats tipped over on soft surfaces. To prevent suffocation:
- Never use on a bed, sofa, cushion, or other soft surface.
- Stay near and watch baby during use. This product is not safe for sleep or unsupervised use.
- If baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.
- Never let the child sleep in this product.
- Never attach any additional strings or straps to the product or toy bar.
- Never use as an infant carrier or for automobile or airline travel.
Important Information
- Adult assembly required.
- Please read all instructions before assembly and use of the product.
- Care should be taken in unpacking and assembly.
- Examine product frequently for damaged, missing, or loose parts.
- Do not use if any parts are missing, damaged, or broken.
- Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
- This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.
Care and Cleaning
- Seat pad: Remove from frame. Fasten buckles on seat restraint and seat pad. Fasten all hook-and-loop patches. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, using low heat.
- Toy bar and toys: Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
- Lambswool Bolster: Dry clean only.
- Frame: Wipe the metal frame with a soft, clean cloth and mild soap.
Battery Information
The Music/vibration Unit requires (3) size C/LR14 (1.5V) alkaline batteries (not included).
CAUTION: Follow the battery guidelines in this section. Otherwise, battery life may be shortened or the batteries may leak or rupture. To prevent battery leaks, which can burn skin and eyes:
- Always keep batteries away from children.
- Never mix old and new batteries, or batteries of different brands or types.
- Always replace the entire set of batteries at one time.
- Do not mix alkaline, standard, or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Install the batteries so that the polarity of each one matches the markings in the battery compartment.
- Do not short-circuit the batteries.
- Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
- Remove exhausted batteries from the battery compartment.
- Never attempt to recharge a battery unless it is specifically marked "rechargeable."
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Dispose of used batteries immediately.
- Please use the correct disposal method for batteries.
- Remove batteries before putting the product into storage for a prolonged period of time.
- Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
- Do not dispose of product or batteries in fire; batteries may explode or leak.
This symbol ♻️ indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.
FCC Statement / CAN ICES-3 (B) / NMB-3(B): This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Assembly Instructions
Follow these steps for assembly:
- Battery Installation: Open the battery compartment (labeled 4). Insert three (3) C/LR14 (1.5V) batteries, ensuring correct polarity (+/-). Close the compartment.
- Attach Rocker Runners: Connect the left rocker runner (1) to the base.
- Attach Rocker Runners: Connect the right rocker runner (2) to the base.
- Attach Rear Assembly: Connect the rear rocker assembly (3) to the base.
- Adjust Seat: Adjust the seat to the desired angle.
- Attach Harness: Connect the harness straps to the buckles.
- Place Seat Pad: Position the seat pad (6) onto the frame, aligning attachment points.
- Secure Seat Pad: Fasten the seat pad using the harness straps and buckles. Ensure a secure fit (look for the checkmark symbol ✔️).
- Attach Toy Bar: Attach the toy bar (8) to the seat frame.
- Adjust Seat Pad: Ensure the seat pad is properly fitted for comfort.
- Attach Toys: Attach the toy bar (8) with the toy to the seat frame.
- Place Bolster: Place the lambswool bolster (7) onto the seat pad.
Usage Instructions
Using the Seat Restraint
Follow these steps to secure your child:
- Adjust the harness straps to fit the child snugly.
- Place the child in the seat and secure the harness.
- Ensure the harness is properly tightened.
Using the Recline Function
Adjust the seat back to the desired recline position.
Adjusting the Kickstand
- Stationary Position: Engage the kickstand for a fixed, non-rocking mode.
- Rocking Position: Disengage the kickstand to allow the seat to rock or sway.
Music/Vibration Unit Operation
- Power: Press the Power button to turn the unit ON/OFF. The power LED will illuminate when ON. The unit will automatically stop after 25 minutes of inactivity (time out).
- Nature Sounds: Press the Nature Sounds button to cycle through nature sounds and mute. Sounds play for approximately 25 minutes before timing out.
- Music: Press the Music button to cycle through music and mute. Music plays for approximately 25 minutes before timing out.
- Volume: Press the Volume button to adjust the sound level (Low, Medium, High).
- Vibration: Press the Vibration button to turn the vibration function ON/OFF. Vibration operates for approximately 25 minutes before timing out.
Storage and Travel
- Fold the rocking seat for storage or travel.
- Secure the seat pad.
- Fold the frame.
- Remove batteries if storing for an extended period.