Nespresso Coffee Machine Quick Start Guide

Safety Instructions

CAUTION: Before operating your coffee machine, please refer to the safety instructions leaflet to avoid possible harm and damage.

(Multilingual safety warnings are provided in the original document.)

Machine Overview

Familiarize yourself with the different parts of your Nespresso machine.

Citiz

• 1. Drip Tray: Catches coffee drips.
• 2. Drip grid: Supports cups and catches drips.
• 3. Used capsule container: Collects used coffee capsules.
• 4. Coffee outlet: Where coffee is dispensed.
• 5. Lever: Used to insert and eject capsules.
• 6. Espresso button (40 ml / 1.35 fl oz): For brewing espresso.
• 7. Lungo button (110 ml / 3.75 fl oz): For brewing lungo.
• 8. Water Tank: Holds water for brewing.

Essenza Mini

• 1. Drip Tray
• 2. Drip grid
• 3. Used capsule container
• 4. Coffee outlet
• 5. Lever
• 6. Espresso button
• 7. Lungo button
• 8. Water Tank

Inissia

• 1. Drip Tray
• 2. Drip grid
• 3. Used capsule container
• 4. Coffee outlet
• 5. Lever
• 6. Espresso button
• 7. Lungo button
• 8. Water Tank

Pixie

• 1. Drip Tray
• 2. Drip grid
• 3. Used capsule container
• 4. Coffee outlet
• 5. Lever
• 6. Espresso button
• 7. Lungo button
• 8. Water Tank

First Steps

1. Rinse the water tank: Rinse the water tank and fill it with fresh potable water.
2. Place a container: Place a cup or mug under the coffee outlet.
3. Turn on your machine: Press the power button. The machine will heat up.
4. Prime the machine: Press the Lungo button three times to rinse the internal system.

Coffee Preparation

1. Turn on your machine: Ensure the machine is powered on.
2. Fill the water tank: Fill the water tank with fresh potable water.
3. Insert a capsule: Lift the lever, insert a Nespresso capsule, and close the lever.
4. Place a cup: Place a cup under the coffee outlet.
5. Start brewing: Press the Espresso or Lungo button to start brewing your coffee.

Cleaning

1. Wash with hot water + mild odourless detergent: Clean the machine parts with warm water and a mild, odourless detergent.
2. Dry with a clean and fresh towel: Ensure all parts are dried thoroughly with a clean towel.

Descaling

Regular descaling is essential for maintaining your machine's performance and longevity. Follow these steps:

1. Eject capsule: Remove any capsule from the machine.
2. Empty capsules and water: Empty the used capsule container and the drip tray.
3. Add water + Nespresso descaling agent: Fill the water tank with 1L of water and add the Nespresso descaling solution.
4. Place a container: Place a large container (at least 1L capacity) under the coffee outlet.
5. Enter descaling mode: Turn on the machine and press and hold the Lungo button for at least 3 seconds until the indicator lights blink. Then, press the Lungo button to start the descaling cycle.
6. Start descaling: The machine will run the descaling solution through the system.
7. Refill and descale again: Once the first cycle is complete, empty the container, refill the water tank with fresh water, and repeat the descaling process (steps 3-6) to rinse the machine.
8. Rinse water tank, fill with fresh potable water and press Lungo: After descaling, rinse the water tank thoroughly and refill it with fresh potable water. Then, press the Lungo button to exit the descaling mode.
9. Repeat step 8: Perform step 8 again to ensure all descaling solution is flushed out.
10. Exit descaling mode: The machine will automatically exit descaling mode after the process is complete.

Troubleshooting

Refer to the table below for common issues and their solutions.

(The original document provides detailed troubleshooting for multiple languages.)

Specifications

(Detailed voltage and frequency specifications for various regions are provided in the original document.)