Important Safety Notice
Always use proper tools.
Follow the assembly steps in order. Do not skip any steps.
Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
Keep the instructions for future reference.
Some assembly may involve attaching glass or mirrors. Be very careful handling the glass or mirrors, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
When assembling products that have electric cords (lamps, light, etc.), always (1) make sure the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves – use a step ladder.
Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person.
Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
Note: Ashley Furniture Industries, Inc. disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Parts List
For Models B476-65/69:
- A x 1: Main frame component
- B x 1: Shelf
- C x 1(R): Right side panel
- D x 1(L): Left side panel
- E x 2: Drawer box
- F x 8: 1/4" x 38mm screws
- G x 5: 1/4" x 30mm screws
- H x 13: 1/4" bolts
- J x 13: 1/4" washers
- K x 2: Allen wrench (4mm)
For Models B476-95/98/99:
- L x 2: Frame support
- M x 1: Center support beam
- N x 1: Center support beam
- P x 2: Drawer front
- R x 4: Screws
- S x 8: 5/16" x 75mm screws
- T x 2: 1/4" x 30mm screws
- U x 2: Drawer slides
- W x 2: Drawer slides
- X x 6: Wooden dowels
- Y x 6: 472mm wooden slats
- Z x 1: Support leg
- AA x 30: 5/16" screws
- AB x 8: Connectors
- AC x 8: Connectors
- AD x 1: Connector
For Models B476-64/66:
- AE x 1: Back panel
- AF x 2: Side rail
- AG x 4: Drawer front
- AH x 2: Side rail
- AJ x 3: Legs
- AK x 10: 1/4" x 55mm screws
- AL x 12: 1/4" screws
- AM x 12: 1/4" screws
- AN x 2: Screws
Note: Some hardware items may not be included or are shown for illustration purposes only. The "Not included" note applies to part K for some models.
Assembly Instructions
Step 1: Frame Assembly
Assemble the main frame components. Attach part A (headboard structure) to side panels C (right) and D (left) using hardware H (1/4" bolts), J (1/4" washers), and K (Allen wrench). Ensure all bolts are started before tightening.
Step 2: Frame Continuation
Continue assembling the frame. Attach additional frame pieces using hardware G (1/4" x 30mm screws), H (1/4" bolts), J (1/4" washers), and K (Allen wrench). Magnified views show specific connection points.
Step 3: Drawer and Side Panel Attachment
Insert drawer boxes (E) into the frame. Attach side panels (F) to the frame using hardware S (5/16" x 75mm screws).
Step 4: Back Panel Attachment
Attach the back panel (AE) to the assembled frame using hardware S (5/16" x 75mm screws).
Step 5: Headboard to Frame Connection
Connect the main bed frame (L for models -95/98/99) to the headboard assembly. Use hardware S (5/16" x 75mm screws), AB (connectors), AC (connectors), and AD (connector).
Step 6: Side Rail and Support Attachment (Left Side)
Attach the left side rail (AH) and cross supports (AK, AL, AM) to the frame. Use hardware K (Allen wrench) and AJ (legs). Multiple screws (AK, AL, AM) are used for securing these components.
Step 7: Side Rail and Support Attachment (Right Side)
Attach the right side rail (AF) and cross supports (AK, AL, AM) to the frame. Use hardware K (Allen wrench) and AN (screws). Multiple screws (AK, AL, AM) are used for securing these components.
Step 8: Center Support and Leg Attachment
Install the center support beam (N) and attach the legs (AJ) to the frame. The diagram shows the placement of the center support and legs.
Step 9: Slat Installation
Place the wooden slats (V) across the frame. Secure them using hardware Y (472mm wooden slats) and Z (support leg). The diagram shows multiple slats being attached.
Step 10: Adjustable Leveler Adjustment
Adjust the levelers on the bottom of the cross-slat support legs. Ensure there is a 6mm (approximately 1/4 inch) gap between the leveler and the floor for proper stability.
Step 11: Final Assembly View
A visual representation of the fully assembled bed is shown.
Step 12A: Slat Attachment (Models -98 & -99)
For models B476-98 and B476-99, attach the slats (AA) using hardware R (screws). The diagram shows multiple screws (AA) being used to secure the slats.
Step 12B: Slat Attachment (Model -95)
For model B476-95, attach the slats (AA) using hardware R (screws). The diagram shows multiple screws (AA) being used to secure the slats.
Step 13: Final Notes
Important: Always disassemble the bed prior to moving it to a new location.
Note: Always disassemble the bed prior to moving to a new location.
Note: Siempre desarme la cama antes de moverla a un nuevo lugar.
Note: Toujours démonter le lit avant de le déplacer vers un nouvel emplacement.
Note: 在移动床到新位置之前请务必拆卸床。
