Signature Design by Ashley B476 Series King Storage Bed Assembly Instructions
Model Numbers: B476-64/65/66/69/95/98/99
Important Safety Notice
Read carefully before beginning assembly!
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Check all packing materials for small parts that may have come loose. Contact the retailer if parts are missing. DO NOT USE SUBSTITUTE PARTS.
- Periodically check to ensure all connectors (bolts, screws, etc.) are tight.
- Keep instructions for future reference.
- Handle glass or mirrors with extreme care to avoid severe injury if they break. Never handle large pieces of glass or mirrors alone.
- When assembling products with electrical cords (lamps, lights, etc.), ensure the cord is unplugged before assembly and do not twist the cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder.
- Do not stand on tables, including end tables, coffee tables, and dinner tables, as they are not designed to support human weight.
- If assembly requires two or more people, do not attempt it alone due to risk of injury.
Note: Ashley Furniture Industries, Inc. disclaims any liability for damages or injuries due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Parts List
Assembly Steps
Step 1:
Two or more people should assemble the unit. Do not tighten any bolts until all bolts have been started.
Attach part W to part AA using parts A, C, D, and Z. Ensure all bolts are started before tightening.
Step 2:
Attach part Y to the assembled unit using parts B, C, D, and F. Ensure all bolts are started before tightening.
Step 3:
Attach the drawer units (M) to the headboard structure using part G. Ensure the drawer slides are correctly oriented.
Step 4:
Attach part AC to the main frame using screws.
Step 5:
Attach the side rails (AB) to the headboard and footboard structures using parts J, H, and K. Ensure a secure fit.
Step 6:
Attach the support frame (T) to the side rails using parts F, D, and C. Then attach the support legs (U) to the frame.
Step 7:
Attach the support frame (AD) to the side rails using parts F, D, and C. Then attach the support legs (B) to the frame.
Step 8:
Place the slatted base (AE) onto the assembled frame. Secure the slats using parts S and R. Ensure the slats are evenly spaced.
Step 9:
Insert the drawers (N and P) into their respective openings.
Step 10:
Step 1: Place the slatted base onto the frame.
Step 2: Ensure the slatted base is properly seated.
Step 11:
Insert drawers (P) and (N) into the frame.
Step 12A: For models -98 & -99. Attach part AG to the frame using part L (x26) and part AC using part L (x4).
Step 12B: For model -95. Attach part AG to the frame using part L (x4).
Step 13:
Note: Always disassemble the bed prior to moving to a new location.
