ANGRIM Chair Frame Assembly Instructions
Product Overview
This document provides assembly instructions for the IKEA ANGRIM chair frame, including parts and assembly steps.
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 194005 | Bolt | 4x |
| 106675 | Washer | 4x |
| 100837 | Bolt | 4x |
| 10003816 | Bolt | 4x |
| 113153 | Connector/Nut | 4x |
| 100001 | Allen Key | 1x |
Assembly Steps
Step 1: Prepare the Base
Insert four bolts (194005) with washers (106675) into the central connecting piece. Do not fully tighten.
[Diagram Description: Central piece with bolts and washers inserted.]
Step 2: Attach First Set of Legs
Attach two legs using bolts (100837) and connectors (113153). Tighten with Allen key (100001).
[Diagram Description: Two legs attached to the base with bolts and connectors.]
Step 3: Attach Second Set of Legs
Attach the remaining two legs using bolts (100837) and connectors (113153). Tighten with Allen key (100001).
[Diagram Description: Remaining two legs attached.]
Step 4: Secure the Frame
Use bolts (10003816) to further secure leg attachments. Tighten with Allen key (100001).
[Diagram Description: Additional bolts reinforcing leg attachments.]
Step 5: Connect Cross Supports
Assemble cross supports using bolts and connectors (113153). Tighten with Allen key (100001).
[Diagram Description: Cross supports assembled and attached to the frame.]
Step 6: Final Tightening
Turn frame upright. Tighten all bolts and connectors with Allen key (100001). Check stability. ✔️
[Diagram Description: Frame upright, hand tightening a bolt. Checkmark indicates completion.]
Important Assembly Note
For optimal stability, re-tighten all screws approximately two weeks after assembly.
[Diagram Description: Person with manual and screwdriver, note on re-tightening.]
General icons: ? (Screwdriver), ❌ (Warning), ✔️ (Correct), ❓ (Uncertainty), ℹ️ (Information).
