Tuya WiFi Phase Clamp Instruction Manual
This manual provides instructions for the Tuya WiFi Phase Clamp, a smart home device for energy monitoring and automation.
Product Overview
The Tuya WiFi Phase Clamp is designed for global international operation, allowing you to monitor and control your home's electrical devices from anywhere via a mobile app. It supports voice control with Google Home and Amazon Alexa, and allows for device sharing.
Key Features:
- All-in-one Mobile App control
- Voice control compatibility (Google Home, Amazon Alexa)
- Device Sharing functionality
- In-house local operation
Technical Specifications
| Product type | WIFI Phase Clamp |
| Voltage | AC 100-240V 50/60Hz |
| Max.load | 1CH: 0.2-80A, 2CH: 2x(0.2-80A) |
| Operation frequency | 2.412GHz-2.484GHz |
| Operation temp. | -10°C-+40°C |
| Protocol | WIFI IEEE802.11b/g/n |
| Operation range | <100m |
| Dims(WxDxH) | 39.2x39.2x18mm |
| IP rating | IP20 |
| Warranty | 2 years |
| Certificates | CE ROHS |
Dimensions:
- 1CH WIFI Single Phase Clamp: 39.2mm x 39.2mm x 18mm (with mounting clip: 43mm)
- 2CH WIFI Single Phase Clamp: 39.2mm x 39.2mm x 22.3mm (with mounting clip: 43mm)
Installation Warnings
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp or hot environments.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption.
- Obstructions like concrete walls or metallic materials may reduce the effective operation range and should be avoided.
- Do NOT attempt to disassemble, repair, or modify the device.
Wiring Instructions and Diagrams
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram.
- Turn on the power supply and follow the switch module configuration instructions.
Notes: Take your smartphone close to the switch module when configuring, and ensure at least 50% Wi-Fi signal strength.
Wiring Diagram Description: The diagram shows a single-phase clamp connection with terminals labeled S1, S2, N, and OL for the 1CH model, and S1, S2, S3, S4, N, and OL for the 2CH model. It illustrates the connection of live and neutral wires to the device.
App User Manual
1. Download the App: Scan the QR code or search for "Tuya Smart" on the App Store or Google Play to download the app.
2. Register/Login: Register or log in using your mobile number or email address. Enter the verification code, set a password, and create a family group.
3. Pairing the Device: After wiring, open the terminal box cover and press the reset key for about 10 seconds until the indicator light flashes quickly for pairing.
4. Adding the Device:
- Turn on Bluetooth.
- Click the '+' icon.
- Follow the on-screen instructions for pairing (supports WIFI/Bluetooth multi-protocol matching).
5. Device Configuration: The connection process takes approximately 10-120 seconds depending on network conditions.
6. Device Control: Once connected, you can control the device via your mobile phone.
7. Advanced Features:
- Basic Information: View device name, location, network status, and supported third-party controls.
- Voice Control: Connect to Amazon Alexa or Google Assistant for voice commands.
- Device Sharing: Share control of the device with family members or friends.
- Create Group: Organize devices into groups for easier management.
Enjoy your smart home automation experience with lighting control and voice commands.
FAQ
- Q1: What should I do if I can't configure the switch module?
- Check if the device is powered on, ensure your mobile and switch module are on the same 2.4 GHz Wi-Fi network, verify good internet conditions, confirm the correct Wi-Fi password is entered in the app, and check wiring correctness.
- Q2: What device can be connected to this WIFI Single Phase Clamp?
- Suitable for main switches, solar power generation systems, and large machinery.
- Q3: What happens if the Wi-Fi goes off?
- You can still control the connected device using your traditional switch. The module will automatically reconnect to your Wi-Fi network once the Wi-Fi is active again.
- Q4: What should I do if I change the Wi-Fi network or password?
- You need to re-connect the Wi-Fi switch module to the new Wi-Fi network as per the App User Manual.
- Q5: How do I reset the device?
- Press the reset key for approximately 10 seconds until the indicator light flashes.
