WiFi Smart Door Magnetic User Manual
*Please read this manual carefully before use and keep it for future reference.
Manual to Prevent Any Damage
- Tamper protection
- Low battery alert
- Alexa compatible
- OTA firmware upgrade supported
Specifications
| Specification | Value |
|---|---|
| Input voltage | DC3V LR03 |
| Quiescent Current | ≤10uA |
| Alarm Current | ≤160mA |
| Low power undervoltage | ≤2.7V |
| WiFi | 802.11b/g/n |
| Magnetic control distance | ≥15mm |
| Working temperature | -10-50°C |
| Working humidity | max 95%RH |
How to Use
-
Push the mounting bracket upward and take out the bracket, then insert the battery.
Diagram showing the sensor's battery compartment with two slots.
-
Put the battery into the battery bin and place it according to the graphics in the battery bin. After two batteries are loaded, the indicator lights are always on and then off.
Diagram illustrating two batteries being inserted into the sensor's battery compartment, with positive (+) terminals indicated.
-
Download the TUYA Smart APP from the app store or Google Play store, or scan the following QR code.
[QR Code for TUYA Smart APP download]
Supported platforms: iOS/Android
-
Register with a mobile phone number. Click the "My Home" interface "+" or click "Add Devices" in the middle blank.
Select the security sensor and click on the door magnetic sensor.
Diagrams of the TUYA Smart APP: showing the 'My Home' screen with an 'Add Device' button, and the 'Add Device' menu with 'Security & Sensor' selected, leading to 'Door Magnetic Sensor'.
-
With the card pick-up pin from the accessory package, hold the reset key for more than 5 seconds. The indicator will flash into the automatic network connection mode. Enter the WiFi password according to the prompt, and click to confirm.
Diagram of the TUYA Smart APP showing the 'Connecting' screen with a progress indicator at 6%.
-
In the automatic network connection mode, the indicator flashes quickly. To enter manual network connection mode, hold the reset key for 5 seconds with the card pickup pin; the indicator will flash slowly. The APP should choose the compatible mode. According to the prompt, enter the "WiFi password" and click confirmation, then switch to the WIFI settings interface. Connect to the "Smartlife-XXXX" network and return to the APP to continue adding devices.
Diagrams of the TUYA Smart APP: showing the 'Add Device' screen in AP mode, and the prompt to connect the phone's Wi-Fi to the device's hotspot.
-
Network connection successful. Click on the door magnetic icon to enter the interface. When the door magnetic is opened, the APP will remind you that the door is open. When the magnet door magnetic is closed, the APP will remind you that the door is closed.
