Urmet Model 1150 Door Phone System

Document DS 1150-001A | LBT 8932

Product Overview

This document provides installation and wiring information for the Urmet Model 1150 and 1150/1 door phones. These models are available without buttons (Ref. 1150) or with one additional button (Ref. 1150/1), supporting both traditional and electronic call systems.

Component Descriptions

1. Handset (Door Phone): A typical Urmet handset, featuring a speaker, microphone, and buttons for call functions and door release.

2. Internal Unit: An internal wall-mounted unit, likely housing the main circuitry for the door phone system.

3. Outdoor Unit (Door Station): An outdoor panel designed for mounting at the entrance. It includes a speaker, microphone, and a call button. The unit has a height of approximately 155 cm.

Traditional Call System (SC101-1463B)

This section details the wiring for the traditional call system.

Wiring Diagram for Traditional System

A diagram illustrates connections from the main riser to the door phone. Key terminals include:

CA: Common Audio
2: Call Return
9: Microphone
1: Speaker
10: Door Release
-/~: Power Input (AC/DC)
CP: Call Button

Connections are shown for subsequent door phones in the system, indicating a parallel wiring scheme from the riser.

Buzzer Adjustment (C4.033)

To adjust the buzzer (models Sch. 9854/56, Ref. 9854/56, BN 9854/56), move the jumper and insert a 47 Ohm resistor onto the buzzer. This modification is crucial for proper operation in certain configurations.

Electronic Call System (SC101-1464A)

This section outlines the wiring for the electronic call system.

Wiring Diagram for Electronic System

A diagram shows connections from the main riser to the door phone. Key terminals include:

CA: Common Audio
2: Call Return
6: Data/Signal Line
10: Door Release
1: Power/Audio

Similar to the traditional system, connections are shown for subsequent door phones, indicating a parallel wiring scheme from the riser.

Waste Electrical and Electronic Equipment (WEEE) Directive 2012/19/EU

The crossed-out wheeled bin symbol on this product or its packaging signifies that the product must not be disposed of with general household waste. Instead, it is the user's responsibility to dispose of waste equipment at a designated collection point for the recycling of waste electrical and electronic equipment.

Separate collection and recycling of waste equipment helps conserve natural resources and ensures environmentally sound recycling, protecting human health and the environment.

For more information on waste equipment recycling, contact your local city office, household waste disposal service, or the shop where the product was purchased.

	Urmet 1150 Door Phone Interphone Technical Specifications Technical specifications and wiring diagrams for Urmet Mod. 1150 and 1150/1 door phones and interphones, supporting traditional and electronic call systems.
	Urmet Mikra 1122 Single Family Audio Intercom Kit Installation Guide Comprehensive installation guide for the Urmet Mikra 1122 4+n one family audio intercom kit, including components, mounting steps, wiring diagrams, and accessory information.
	Poste Audio Urmet Atlantico 4 + N - Réf. 1150/1 Découvrez les spécifications et accessoires du poste audio Urmet Atlantico 4 + N, référence 1150/1, conçu pour les installations résidentielles collectives. Boîtier ABS blanc, touche ouvre-porte, touche de service et emplacements pour touches supplémentaires.
	Urmet Audio-Kit 2-Wire Installation Manual Installation guide for the Urmet Audio-Kit 2-Wire system (Model 1122), providing wiring diagrams, component details, and usage instructions for single-family homes.
	Urmet 1130/16 Universal Door Phone: Installation, Programming, and Troubleshooting Guide Detailed guide for the Urmet 1130/16 universal door phone. Covers installation for 4+n and 1+n systems, programming jumpers and trimmers, testing procedures, troubleshooting common issues, and compatibility information with other brands.
	Urmet 1140/1 Signo Electronic Call System Installation and Wiring Detailed guide for installing and wiring the Urmet 1140/1 Signo electronic call intercom system, including terminal connections and wiring diagrams for various configurations.
	Urmet Universal Door Phone Model 1144 Installation and User Manual Comprehensive installation, user, and technical guide for the Urmet Universal Door Phone Model 1144, covering component descriptions, characteristics, installation steps, terminal descriptions for 4+n and 1+n systems, programming, adjustments, troubleshooting, technical specifications, and compatibility with various manufacturers.
	Urmet UNIVERS DS 1122-003C Audio-Kit 2-Wire Installation Guide Installation and wiring guide for the Urmet UNIVERS DS 1122-003C 2-wire audio kit for single-family homes. Includes wiring diagrams, accessory compatibility, and WEEE directive information.