EPIC Horizontal Rim Lock

Diagram and Parts

The document includes a diagram illustrating the components and assembly of the EPIC Horizontal Rim Lock. This is an exploded view showing how the parts fit together on a door and door frame.

Key Components:

• Outer Body: The exterior part of the lock.
• Inner Body: The interior part of the lock.
• Back Plate: A mounting plate for the Inner Body.
• Strike: Mounted on the door frame for the deadbolt.
• Strike Spacer: Used for adjusting the height of the Strike.
• Connect Cable: Links the Outer and Inner Bodies.
• Battery: Four LR6 batteries are required.
• Battery Cover: Protects the battery compartment.
• Extra Screws: For additional reinforcement.

Screws Used:

• BH M5x30 (2 pieces)
• OH M4x30 (2 pieces)
• OH M4x25 (2 pieces)
• BH 4.2x20 (4 pieces)

Door Lock Installation Guide

1. Check Door Thickness

   Ensure the door thickness is between 30 mm and 50 mm. If the door is outside this range, the lock may not operate correctly or may not be installable.

2. Select Installation Position & Attach Template

   With the door fully closed, attach the supplied Installation Paper to the indoor side of the door. Make sure the template is perfectly level. (If it's not level, the deadbolt may not align with the Strike or the door may not lock properly.)

3. Drill the Main Hole

   Drill a 32 mm diameter hole at the marked point(s) on the Installation Paper. ✔️ This is the main hole for the Connect Cable; accuracy is essential.

4. Temporarily Assemble Outer Body & Back Plate

   Use two BH M5×30 mm screws to lightly secure the Outer Body to the Back Plate. (Do not overtighten at this stage; this is only a temporary fix.)

5. Temporarily Attach Inner Body & Check Operation

   Temporarily assemble the Inner Body to the Back Plate, then check:

   1. When the door is closed and the Strike is in position, the auto-lock sensor operates normally.
   2. With the deadbolt locked, at least 10 mm of the deadbolt is inserted into the Strike.
   3. The deadbolt moves smoothly when locking/unlocking.

   Adjust the Back Plate position as needed based on the above checks.

6. Secure the Outer Body

   Align the Outer Body and Back Plate horizontally, then fully secure them. Optional extra reinforcement: use Extra Screws (BH 4.2x20 mm screws, 4pcs) for stronger fixing.

7. Secure the Inner Body

   Attach the Inner Body to the Back Plate using two OH 4x30 mm screws and two OH 4x25 mm screws.

8. Install the Strike

   Fix the Strike to the door frame with four BH 4.2x20 mm screws. If height adjustment is needed, add Strike Spacers. (Depending on spacer height, BH 4.2x32 mm screws may be used.)

9. Final Test

   After installation, operate the lock/unlock function several times from the indoor side to confirm normal operation. If the lock does not engage or the deadbolt catches, finely adjust the Strike or Back Plate position.

Extra Tips

• Before installation, ensure Connect Cable for both the Outer Body and Inner Body is not bent or pinched.
• When using a power drill, avoid excessive speed to prevent door damage.
• After installation, before inserting the batteries and powering on, double-check that all screws are securely tightened.