Lost Vape Galaxy T360 Pod Kit User Manual
Model: Galaxy T360 (also associated with P30L+V3B)
Brand: Lost Vape
Safety Warnings
Warning for vulnerable consumer groups: This product is not recommended for minors, pregnant or breastfeeding women, or anyone at risk of heart disease, depression, and asthma.
Battery Caution: Do not expose the device to extreme temperatures. Do not disassemble the device without Lost Vape's recommendation.
Cartridge Attention: Do not dry burn the cartridge or coil. It is essential to prime a new coil. Fill your tank with e-liquid and leave it to stand for at least 5 minutes before vaping. This allows the cotton inside the new coil to absorb e-liquid. All cartridges/coils are not covered under warranty once opened, used, or filled with liquids.
Warranty: The device is covered by a 3-month warranty from the date of purchase.
Contacts: For further questions or inquiries, please contact Lost Vape by email at support@lostvape.com or visit our website: www.lostvape.com.
Product Description & Parameters
Product Description
This document provides instructions and safety information for the Lost Vape Galaxy T360 Pod Kit.
Basic Parameters
| Parameter | Specification |
|---|---|
| Dimensions | 30*20*114.8mm (Cartridge Height: 20mm) |
| Net Weight | 60g±3g |
| Pod Capacity | 2.5ml / 2ml |
| Coil Resistance Range | 0.35Ω-2.5Ω |
| Power Range | 5W-35W |
| Battery Capacity | 1200mAh |
| Battery Voltage | 3.3V-4.2V |
| Charging Voltage | 5V/1.0A |
| Type-C Cable | Supports 5V/2A Charger |
| Material | Plastic |
Components Overview
The device consists of the following parts:
- Cartridge
- 360° Screen
- Power Button
- E-liquid Refilling Plug
- Type-C Port
- Airflow Control Button
- Built-in Battery
UI Display Overview
The device screen displays the following information:
- Mesh Coil Icon
- Battery Level
Basic Operation
Fill with E-liquid
- Open the plug and refill the pod.
- Seal the plug and insert the pod.
- Let it stand for 5 minutes (⏳) before vaping.
Button Operation
- 1 Click: Screen On ?
- 3 Clicks: Power Saving Mode (Only displays mesh icon & battery)
- 5 Clicks: Power On/Off ⚡
Charging Indication
- It is recommended to be charged with a 5V/2A charger.
- Vaping is NOT supported during charging.
- Button functions remain available while charging.
Warning Descriptions
The device provides visual feedback for various states:
- Low Battery ⚠️: The battery level and icon will flash 10 times.
- Open Circuit: The mesh & battery icons with "88" flash 5 times.
- Short Circuit: The mesh & battery icons with "88" flash 3 times.
- Overtime: The entire screen flashes 3 times.
