Lost Vape Thelema Elite S Pod Kit User Manual
Product Overview and Operating Guide
Safety Warnings
This product is not intended for use by children, pregnant or breastfeeding women, people with heart disease, depression, and asthma.
Do not expose the device to extreme temperatures, nor disassemble the device without Lost Vape's customer service.
Do not dry burn the cartridge or coil. It is recommended to fill the e-liquid and let it stand for 5 minutes before the first use.
Never use a tank or cartridge that is empty.
The device is covered by a 3-month warranty from the date of purchase.
For further questions or inquiries, contact Lost Vape customer service or visit www.lostvape.com.
Components Overview
- Mouthpiece
- Cartridge
- Button
- Battery Indicator
- Type-C Port
Product Description
Basic Parameters
| Parameter | Specification |
|---|---|
| Dimensions | 35.5*19*105mm |
| Net Weight | 65g |
| Battery Capacity | 1400mAh |
| Battery Voltage | 3.0V-4.2V |
| Output Wattage | 5W-40W |
| Resistance Range | 0.3Ω-3.0Ω |
| Pod Capacity | 5ml/4ml (TPD) |
| Type-C Cable | Supports 5V/2A Charger |
| Body Material | PC, PU Leather |
Basic Operation
3 Steps to Fill with E-liquid
- Open the silicone mouthpiece.
- Fill with e-liquid.
- Close the tab.
Note: "Prepare the new cartridge by making it soaked in E-liquid for 5 minutes before vaping."
Indicators
Status Indicators
- Draw Activation: Battery bar alerts.
- Charging: Battery bar syncs.
- Full Charged: Battery bar stays on for 10 seconds, then turns off.
Safety Protection
- Low Battery Voltage: Warning message when battery voltage is below 3.0V.
- Short Circuit: Alarm indicates a short circuit in the atomizer.
- Over Time Protection: If the button is pressed for more than 8 seconds, the device will automatically shut off.
