Artika Skyview™ Ultra Slim LED Regressed Downlight

Included Hardware

• Item A: Fixture (Luminaire) - Quantity: 1
• Item B: Power Box (Boîtier d'alimentation) - Quantity: 1
• Item C: Wire connector P4 (Capuchon de connexion P4) - Quantity: 3
• Item D: Wire connector P2 (Capuchon de connexion P2) - Quantity: 2

Tools Needed

• Hand Saw (Scie à main)
• Screwdriver (Tournevis)
• Hole Saw (4 3/8\" - 110 mm) (Scie-cloche)

Safety Precautions

WARNING: ⚡ Risk of electrical shock. Turn off the main electrical supply from the fuse box/circuit breaker before installing or performing maintenance. Do not use outdoors.

CAUTION: If using a dimmer, it must be LED compatible.

IMPORTANT: Read and understand all instructions before installation. Improper installation or use may void the warranty and lead to product malfunction. It is recommended to have this product installed by a certified electrician.

FCC Compliance: This device complies with Part 15 of the FCC Rules. It must not cause harmful interference and must accept any interference received. If interference occurs, try reorienting the antenna, increasing separation, or using a different circuit.

Installation Instructions

Step 1: Prepare Ceiling Opening

1A: Cut Ceiling Hole: Cut a hole in the ceiling using a hand saw or a hole saw (4 3/8\" - 110 mm).

1B: Break Knock-out: Break the knock-out on the power box using a tool.

Step 2: Wire Connections

2A: Without Dimmer: Connect the fixture wires to the power box wires. Typically, this involves connecting the fixture's white wire to the power box's white wire (N), the fixture's black wire to the power box's black wire (L), and the fixture's ground wire to the power box's ground wire (GND). Use the provided wire connectors (C and D).

2B: With 0-10V Dimmer: Connect the fixture wires, dimmer wires, and power box wires according to the dimmer's instructions and the diagram. This typically involves connecting the dimmer's purple and pink wires to the fixture's corresponding wires, and the main power wires (black/white/ground) to the power box and fixture.

Step 3: Fixture Connection

Connect the fixture's wiring harness to the power box.

Step 4: Selectable White Technology

Select the desired color temperature (e.g., 2700K, 3000K, 3500K, 4000K, 5000K) by adjusting the switch on the fixture or power box as indicated.

Step 5: Feed Power Box

Feed the power box through the prepared ceiling hole.

Step 6: Feed Fixture

Feed the fixture through the ceiling hole.

Step 7: Final Install

Push the fixture into the ceiling opening until it clicks into place, securing it.

Warranty Information

Artika For Living Inc. offers a five-year (5) limited warranty on manufacturing defects for residential use. The warranty is non-transferable and requires the original sales receipt. It covers product or part replacement at Artika's discretion and is valid only for products installed according to codes and instructions. It excludes normal wear and tear, misuse, accidents, and certain other conditions. Labor, transportation, and accessory costs are not covered. For more details, visit www.artika.com.

Customer Service

Contact: Artika For Living Inc.

Address: 800, Boulevard Hymus Saint-Laurent (Québec) H4S 0B5 Canada

Phone: 1-866-661-9606

Email: support@artika.com

Website: www.artika.com

Hours: Monday to Friday, 9 am - 5 pm EST.

Service is provided in English, French, and Spanish.