Artika Skyview™ Ultra Slim LED Regressed Downlight

Step-by-Step Installation

Tools Required: Hand Saw, Screwdriver

1. Cut Ceiling Hole: Cut a hole in the ceiling with a hand saw. The recommended hole size is 9.4 x 9.4 cm (3.7 x 3.7 inches).
2. Prepare Power Box: Break out a knock-out hole in the power box with the help of a tool.
3. Wiring Connection (No Dimmer): Connect the wires according to the diagram. Ensure correct connections for Purple/Violet, Pink/Rose, Black (L), White (N), and Ground (GND) wires using connectors C and D.
4. Wiring Connection (0-10V Dimmer): If using a 0-10V dimmer, connect the wires as shown in the diagram. Ensure the dimmer is LED compatible. Connect Purple/Violet, Pink/Rose, Black (L), White (N), and Ground (GND) wires using connectors C and D.
5. Fixture Connection: Connect the fixture to the power box.
6. Selectable White Technology: Adjust the switch on the fixture to select the desired white color temperature (2700K, 3000K, 3500K, 4000K, 5000K).
7. Feed Power Box Through Hole: Feed the power box through the prepared ceiling hole. ⇧
8. Feed Fixture Through Hole: Feed the fixture through the ceiling hole. Secure the fixture by engaging its clips.
9. Final Install: Ensure the fixture is securely in place. You should hear a click sound when it is properly seated.

Safety and Important Information

CAUTION:

• Risk of electrical shock. Turn off the breaker at the panel before installing or performing maintenance.
• If using a dimmer, it must be LED compatible.
• Do not use this fixture outdoors.

IMPORTANT:

• The installer and user must read, understand, and follow all instructions before installation and use.
• Failure to follow instructions may void the warranty and result in product malfunction.
• It is recommended to have this product installed by a certified electrician, as required by local codes in some regions.

FCC Compliance (USA):

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, try to correct it by reorienting the antenna, increasing separation between equipment and receiver, or connecting to a different circuit. Consult a dealer or experienced technician for help.

Warranty

Artika For Living Inc. offers a five-year (5) limited warranty on manufacturing defects for residential use. This warranty is non-transferable and applies only to the original owner in the USA, Canada, Mexico, UK, Iceland, France, and Spain. It does not cover retailers, commercial applications, or abnormal use. The original sales receipt is required for all warranty claims. Product or part replacement is at Artika's discretion and will not exceed the original purchase price.

The warranty covers products installed according to building codes and the provided manual. It does not cover normal wear and tear, misuse, negligence, vandalism, improper maintenance, accidents, abuse, fire, flood, theft, acts of God, neglect, or product alterations. Accessories like bulbs or batteries are excluded. Costs for handling, labor, or transportation are not covered.

Artika For Living Inc. is not responsible for direct or consequential damages or injuries arising from improper use or installation.

For more information, visit www.artika.com.

Customer Service

Artika For Living Inc.
800, Boulevard Hymus
Saint-Laurent (Québec) H4S 0B5
Canada

Contact:
Phone: 1-866-661-9606
Email: support@artika.com
Website: www.artika.com

Our service is provided in English, French, and Spanish. Available Monday to Friday, 9 am - 5 pm EST.