EcoFlow RIVER 3 Portable Power Station

About This Manual

This user manual applies to the RIVER 3, RIVER 3 (230), and RIVER 3 (10 ms UPS) models. The terms "RIVER 3", "RIVER 3 (230)", and "RIVER 3 (10 ms UPS)" refer to the EcoFlow RIVER series product. This manual may be updated without prior notice. Online versions are available at EcoFlow Support for the latest updates. Illustrations use the US version as reference; refer to your actual product. Accessory availability may vary by region.

Overview

The RIVER 3, RIVER 3 (230), and RIVER 3 (10 ms UPS) are power stations equipped with LiFePO4 batteries. They offer multiple outputs and charging options to meet various needs.

Appearance

Front Panel

The front panel features:

• 1. DC Output Button: Short press to turn on/off the DC output port.
• 2. DC Output Port (Cigarette Lighter): Powers appliances with a rated power of 126W.
• 3. Display Screen: Shows real-time battery level, input power, output power, and other operating status.
• 4. USB Output Ports (USB-C / USB-A): Supply power to phones, laptops, game consoles, and other devices. Supports X-Boost and devices with a rated power under 300W.
• 5. AC Output Socket: The number and type of AC sockets vary by country and region.
• 6. AC Output Button: Short press to turn on/off the AC output socket.
• 7. Main Power Button: Short press to turn on, long press for 3 seconds to turn off.
• 8. Main Power Indicator: Glows white when the power station is on.

Rear Panel

The rear panel includes:

• 9. Heat Vent: Dissipates internal heat.
• 10. AC Input Port: Connects to an AC power source for charging.
• 11. Solar/Car Input Port: Connects to solar panels or a cigarette lighter socket for charging.
• 12. Protective Cover: Covers input ports when not in use to prevent dust and moisture.

Display Screen

The display screen shows the following indicators:

• 1. Charging / Discharging Limit
• 2. Battery Level
• 3. High Temperature Warning
• 4. Total Input Power
• 5. Total Output Power
• 6. Low Temperature Warning
• 7. Overload Warning
• 8. Fan Indicator
• 9. AC Output Frequency
• 10. Wi-Fi Indicator
• 11. Bluetooth Indicator
• 12. Remaining Charging / Discharging time

Error Messages

For unlisted error messages, refer to the EcoFlow app. If problems persist, stop use and contact EcoFlow customer service.

Get Started

Power On/Off

Power On: Short press the main power button. Press again to turn off the display screen. The station enters hibernation after 5 minutes of inactivity.

Power Off: Long press the main power button for about 3 seconds.

? Tip: When charging, the power station cannot be turned off by long pressing the main power button unless the charging cable is unplugged.

Power Your Appliances

Via USB Output Port: Connect devices directly to the USB ports.

Via AC Output Socket: Press the AC output button to turn on/off the AC output socket. Ensure the sum power of connected appliances is less than the socket's rated power. Refer to X-Boost instructions for details.

? Tip: AC Timeout Tip: The AC output port may automatically turn off if idle. For critical uses like refrigerators, set the AC timeout interval to 'never' in the EcoFlow app.

Via DC Output Port (Cigarette Lighter): Press the DC output button to turn on/off the DC output port. Ensure appliances meet the port's starting current requirements to avoid startup issues.

Charge Your Power Station

From a Wall Outlet: Connect the power station's AC input port to a wall outlet using the provided AC charging cable. Maximum AC Input Power: US/JP/BR: 320W; CN/EU/ZA/UK/AU/KR/CH: 305W. Use a power socket with a capacity greater than 10A.

From Solar: Connect the power station's solar input port to solar panels using a solar charging cable (sold separately). Ensure the solar panel's output voltage is less than 30V before connecting.

From a Car Cigarette Lighter: Connect the car input port to your vehicle's cigarette lighter socket using the provided car charging cable. Start the vehicle before charging and ensure the cable is securely connected.

Management

Download EcoFlow App

EcoFlow offers a companion app for device management. Features include all-in-one control, real-time power monitoring, customizable energy schemes, and firmware updates. Download the app at: https://download.ecoflow.com/app

Bind Device and Set Up Internet

Register an EcoFlow account to bind devices for remote access. In the app, tap the 'Add Device' button or '+' icon to search and follow instructions for binding and Wi-Fi setup.

Control via Phone

Manage EcoFlow devices via the app using Wi-Fi or Bluetooth. Wi-Fi provides internet access for updates, while Bluetooth allows local control without internet.

? Tip: Troubleshooting Bluetooth connection: a. Power-off: Hold the main power button for 3 seconds. b. Reset Bluetooth: With the station off, hold the main power button until the power-on animation appears twice. c. Power on & Retry: Turn on and search again.

Explore More

X-Boost: Powering High-Wattage Appliances

The AC output sockets support X-Boost, allowing devices up to 600W (450W for JP version) without overload protection failure. X-Boost is enabled by default and can be managed in the app. It is unavailable in bypass mode. X-Boost is suitable for heating and motor-driven devices, but not for devices with voltage protection.

Backup for Essential Devices

Use the power station for essential household appliances during power outages. Connect the station to grid power and appliances to its AC output. The station automatically transfers to battery power. RIVER 3/RIVER 3 (230) offers Emergency Power Supply (EPS) with a transfer time within 20ms. RIVER 3 (10 ms UPS) offers Uninterrupted Power Supply (UPS) with a transfer time within 10ms. For critical devices requiring uninterrupted power (desktops, servers), use the UPS feature. Power only one device (max 300W) at a time to avoid overload.

Storage and Maintenance

Storage

Storage Temperature: -10°C to 45°C (14°F-113°F). Store in a tidy, dry, well-ventilated place, away from liquids, heat, and sharp objects. For long-term storage, discharge to 0% and charge to 60% every 3 months to maintain battery health. Warranty void if not charged/discharged for over 6 months.

Maintenance

• Cleaning: Use a soft, dry cloth.
• Maintaining Battery Health: Avoid leaving the product unused for extended periods. Charge and discharge every 3 months.

Safety Instructions and Compliances

Disclaimer

Read and understand the manual before use. Improper use may cause injury or damage. Using the product implies acceptance of terms. EcoFlow is not liable for losses due to non-compliance. EcoFlow reserves the right to interpret this document. Visit EcoFlow's official website for the latest product information.

Safety Instructions

Transportation

1. Do not subject to severe impacts or drops. Stop use and turn off if dropped.
2. Do not carry onto a plane.

Environment

1. Do not use near heat sources.
2. Avoid low air pressure environments.
3. Do not get wet or immerse in liquid. Protect in wet environments.
4. Follow temperature specifications.
5. Avoid static electricity or magnetic fields.
6. Keep out of reach of children and pets.
7. Keep away from fumes, smoke, steam, and dust.
8. Store in a tidy, dry, well-ventilated place.

Operation

1. Do not disassemble or repair yourself; contact EcoFlow Customer Service.
2. Disconnect from power sources before service.
3. Pull the plug, not the cord, when disconnecting.
4. Do not pierce with sharp objects.
5. Do not insert fingers or hands.
6. Do not insert wires or metal objects.
7. Do not block heat dissipation.
8. Use only recommended components.
9. Do not operate with damaged cords/plugs.
10. Do not stack heavy objects.
11. Place on a stable surface.
12. Use a soft, dry cloth for cleaning.
13. AC Timeout Tip: See Management section.
14. Medical Equipment Limit: Not for life-sustaining medical equipment. Consult manufacturer for use with other medical equipment.
15. Medical Equipment Interference: May affect medical implants; consult manufacturer.
16. GROUNDING INSTRUCTIONS: Product must be grounded. Use provided cord with grounding plug. Consult electrician for outlet issues.
17. Risk of Electric Shock: Do not use on live parts or wiring.
18. Use in Repair Facility: Do not place on floor; maintain minimum height of 457 mm (18 inches).
19. Do not use damaged/modified batteries.
20. Long-term storage: Discharge/charge every 3 months (0% then 60%).

In Case of Emergency

1. Take precautions against electric shock.
2. If wet, stop use and contact EcoFlow.
3. If dropped in water, keep away until dry, do not reuse, dispose of properly.
4. For fires, use appropriate extinguishers (water mist, sand, blanket, dry powder, CO2) and dispose of according to regulations.

Recycling and Disposal

1. Dispose of damaged/malfunctioning products or depleted batteries according to local laws.
2. Do not mix with household waste.
3. Discharge battery to 0% if possible before disposal. Contact professional recyclers.

Regulatory Compliance

FCC Compliance Statement

Changes not approved by the responsible party may void user authority. Complies with FCC Part 15. Operation subject to two conditions: (1) no harmful interference, (2) accepts interference. Tested for Class A digital device limits in commercial environments. May cause interference in residential areas. Complies with FCC radiation exposure limits; maintain 20 cm distance from radiator and body.

IC Compliance Statement

Maintain 20 cm distance from body for RF exposure compliance. Complies with Industry Canada licence-exempt RSS standard(s). Operation subject to two conditions: (1) no interference, (2) accepts interference. Complies with Canadian ICES-003. Installation and use require minimum 20 cm distance between radiator and body.

CE Marking

EcoFlow Inc. declares compliance with EU Directives (2014/53/EU, 2014/30/EU, 2011/65/EU, 2015/863). Full EU Declaration of Conformity available at: http://www.ecoflow.com/eu/eu-compliance

This marking indicates the product should not be disposed of with household waste in the EU. Recycle properly to prevent environmental damage. Return used product to collection point or retailer for environmentally-sound recycling.

Appendix

What's in the Box

The package includes:

1. RIVER 3 / RIVER 3 (230) / RIVER 3 (10 ms UPS) unit.
2. AC Charging Cable.
3. Car Charging Cable.
4. Manuals & Warranty card.

Accessories

Learn More

Specifications

General

• Model: RIVER 3/RIVER 3 (10 ms UPS): EFR705; RIVER 3 (230): EF-RV-H01-1
• Net Weight: Approx. 3.5 kg (7.72 lb)
• Dimensions (W×D×H): Approx. 255 × 212 × 113 mm (10.04 × 8.35 × 4.45 in.)

Output

• AC Output Wave Form: Pure sine wave
• AC Output (Discharge Only): US/BR: 120V~60Hz, 300W total; JP: 100V~50/60Hz, 300W total; CN: 220V~50Hz, 300W total; KR: 220V~60Hz, 300W total; EU/ZA/UK/AU/CH: 230V~50Hz, 300W total
• AC Output (Bypass Mode): US/JP/BR: 100-120V~50/60Hz, 300W total; CN/EU/ZA/UK/AU/KR/CH: 220-240V~50/60Hz, 300W total
• USB-A Output: 5V-2.4A, 12W Max per port, 24W total
• USB-C Output: PD3.0, QC3.0; 5/9/12/15V-3A Max, 20V=5A Max, 100W Max
• DC Output: 12.6V-10A, 126W Max
• Total Output Power: 550W

Input

• AC Input: US/JP/BR: 100-120V~50/60Hz, 6.5A Max; CN/EU/ZA/UK/AU/KR/CH: 220-240V~50/60Hz, 3.0A Max
• Solar Input: 11-30V-8A, 110W Max
• Car Input: 12/24V-8A, 100W Max

Battery Info

• RIVER 3/RIVER 3 (10 ms UPS): 245Wh 19.2V-12.8Ah
• RIVER 3 (230): 230Wh 19.2V-12.0Ah
• Cell Chemistry: LFP (LiFePO4)
• Cycle Life: Maintains 80%+ SoH after 3000 cycles at 0.5C/0.5C at 25°C (77°F)
• Protection Type: Over Voltage Protection, Overload Protection, Over Temperature Protection, Short Circuit Protection, Low Temperature Protection, Low Voltage Protection, Overcurrent Protection

Environment Temperature

• Optimal Operating Temperature: 20°C-30°C (68°F-86°F)
• Charge Temperature: 0°C-45°C (32°F-113°F)
• Discharge Temperature: -10°C to 45°C (14°F-113°F)
• Storage Temperature: -10°C to 45°C (optimal: 20°C-30°C) / 14°F-113°F (optimal: 68°F-86°F)

Communications

• Method: Wi-Fi, Bluetooth
• Wi-Fi (2.4G) Frequency: CN/BR/MX: 2400-2483.5 MHz; EU/UK/JP/KR/AU: 2412-2472 MHz/2422-2462 MHz; TW/US/CA: 2412-2462 MHz/2422-2452 MHz
• Wi-Fi (2.4G) Maximum Output Power: CN: <20dBm; US: 0.5297W; CA: 0.5297W; JP: 2.921mW/MHz; EU: 17.50dBm; UK: 17.50dBm; AU: 17.50dBm
• Bluetooth Frequency: CN/BR/MX: 2400-2483.5 MHz; EU/UK/TW/US/CA/JP/AU/KR: 2402-2480 MHz
• Bluetooth Maximum Output Power: CN: <20dBm; US: 0.1076W; CA: 0.1076W; JP: 3.67mW; EU: 9.50dBm; UK: 9.50dBm; AU: 9.50dBm

Other

• Operating Altitude: ≤2000 m