Redragon Star Blade Pro K707WBP-RGB-PRO Gaming Keyboard User Manual

Warranty Information

Dear user,

Thank you for choosing a Redragon product. To protect your rights and for better customer service, please read the following warranty rules carefully.

1. Within 18 months of purchase date, repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquake are not included.
2. Consumable parts (such as foot pads) and spare parts replacement are not included in our warranty.

Keyboard Overview

The Redragon Star Blade Pro is a mechanical gaming keyboard featuring a standard QWERTY layout. It includes a full function row (F1-F12), a number row with secondary symbols, alphanumeric keys, and essential modifier keys such as Tab, Caps Lock, Shift, Ctrl, Win, and Alt. A dedicated Fn key is present to access secondary functions. The keyboard also features a navigation cluster (Insert, Home, Page Up, Delete, End, Page Down) and arrow keys. The top edge of the keyboard houses a USB Type-C port for wired connection and a slot for storing the 2.4G wireless receiver. A physical switch on the keyboard allows selection between 2.4G, Off, and Bluetooth (BT) modes.

Indicator lights are present for Caps Lock status (Cap indicator), connection mode (Mode indicator), and battery status (Battery indicator).

How to Connect the Keyboard with Multiple Devices

Wired Connection

1. Set the 2.4G/OFF/BT switch to "OFF".
2. Connect the keyboard to your computer using the USB cable.
3. The computer will automatically recognize and configure the keyboard.

2.4G Wireless Connection

1. Set the 2.4G/OFF/BT switch to "2.4G". The LED indicator will flash yellow.
2. Plug the USB receiver into your computer's USB port. The keyboard will connect automatically.
3. If auto-connection is unsuccessful, or if you want to connect to a new device: unplug the USB receiver, press and hold the [Fn] key and the '4' key for 3 seconds. The LED indicator will flash yellow. Plug the USB receiver into the computer USB port; after pairing, the LED will turn steady.

Bluetooth Connection

1. Set the 2.4G/OFF/BT switch to "BT".
2. Press and hold the [Fn] key and keys '1', '2', or '3' for 3 seconds to initiate pairing. The corresponding LED will flash blue, cyan, or pink quickly.
3. Turn on Bluetooth on your device and search for available devices. It will find "BT3.0 Keyboard and BT5.0 Keyboard". Select the desired Bluetooth name to pair. After pairing, the LED will turn steady.
4. To switch between Bluetooth connections (BT1, BT2, BT3), press the [Fn] key and '1', '2', or '3'.

Product Features

Backlight

• The default 16 backlight patterns can be cycled by pressing [Fn] + [Ins]. Press [Fn] + [Space bar] to turn the backlight ON/OFF.
• Press [Fn] + [Left Arrow] or [Right Arrow] to adjust the light rotating speed (5 levels).
• Press [Fn] + [Up Arrow] or [Down Arrow] to adjust backlight brightness (5 levels).
• To switch backlight colors, press [Fn] + [Del] to cycle through Red, Green, Blue, Yellow, Purple, Cyan, White, and RGB.
• For custom backlight settings (DIY mode): Press [Fn] + [Back Space]. The keys [Esc], [A], [S], [W], [D], [Up Arrow], [Down Arrow], [Left Arrow], [Right Arrow] will light up by default. Press [Fn] + [Back Space] again to start recording. The CAPS LED will flash until recording is complete. Press keys to select the desired color for each key. Once color settings are complete, press [Fn] + [Back Space] to save.

[WIN] Lock

Press [Fn] + [Win] to lock the [Win] key. Press again to unlock. (Note: Do not lock the key when using on macOS.)

[W] [S] [A] [D] & [↑][↓][←][→] Swap

Press [Fn] + [W]. The functions of the [W], [S], [A], [D] keys and the [Up Arrow], [Down Arrow], [Left Arrow], [Right Arrow] keys will be swapped. Press [Fn] + [W] again to revert to normal function.

Commands of Key Combinations with [Fn] Key

Settings and FAQ

Restore Factory Settings

Press and hold the [Fn] key and [Esc] key for 3 seconds.

Power Save Mode & How to Recharge

In wireless/Bluetooth connection mode, if the keyboard is inactive for over 3 minutes, the backlight turns off to save battery. If inactive for over 30 minutes, the keyboard will enter power save mode. Press any key to wake it up.

When the battery is low, the backlight turns off, and the power LED will blink red slowly when a key is pressed.

To charge, connect the keyboard to a computer. The power LED will be steady red while charging and turn steady green when fully charged.

To check battery power: Press and hold the [Fn] key and the [Battery Level Indicator] to display the battery level. Release the keys to return to the current backlight mode.

FAQ

1. If the keyboard does not respond: Please check if the keyboard's USB cable is correctly inserted into the computer's USB port, or try a different USB port on the computer.
2. If liquid is spilled on the keyboard: Immediately unplug the keyboard's USB cable from the computer. Wipe off excess liquid and place the keyboard in a dry, ventilated area. Ensure the keyboard is completely dry before the next use.

Safety Guidelines and Compliance

Battery Safety Guidelines

• DO NOT replace the battery with a different model.
• DO NOT use this product if the battery shows signs of damage, including but not limited to tearing, deformation, leakage, or the smell of electrolytic material.
• DO NOT touch the battery if material is leaking and seek immediate medical attention if any material comes into contact with your skin or eyes.
• DO NOT expose the battery to liquid, heat sources, electricity (outside of the product itself), or other non-standard operating conditions.
• DO NOT remove the battery except for proper disposal and recycling as required by local laws and regulations.
• DO NOT impact, bend, alter, disassemble, or otherwise damage the battery, as its contents are volatile, hazardous, and can be harmful.

CAUTION

Failing to follow all safety guidelines may result in product damage, explosion, fire, and/or electric shock.

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

(French Original: Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes: (1) Cet appareil ne doit pas causer d'interférences. (2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil.)

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Product Identification

Model Name: STAR BLADE PRO

Model Number: K707WBP-RGB-PRO/7227

Brand: REDRAGON

Product Type: Mechanical Gaming Keyboard

Document Version: A.1

Manufacturer/Distributor: Eastern Times Tech