Product Overview
Thank you for choosing Seville Classics! We hope that you enjoy your new AIRLIFT mobile desk. This user guide provides essential information including a parts list, assembly instructions, frequently asked questions, and contact details.
Model #: OFF65903, OFF65904
Product Illustration: A line drawing illustration of the Seville Classics AIRLIFT XL Sit-Stand Mobile Desk with Cup Holder. The desk features a flat top with a recessed area for a cup, a central pneumatic cylinder for height adjustment, and a five-star base equipped with casters for mobility.
Customer Service Information
Telephone: (800) 323-5565
Fax: (310) 533-3899
Hours: 8:30 AM – 4:30 PM (PST)
Email: Support@SevilleClassics.com
Homepage: www.SevilleClassics.com
Parts List
| Part | Description | Quantity |
|---|---|---|
| A | Split washers | 4 |
| B | Washers | 4 |
| C | Tooth washers | 3 |
| D | M6x15 bolts | 8 (for Top Mount) |
| E | M6x12 bolts | 3 (for Airlift lever) |
| F | M8x15 bolts | 4 |
| G | 5mm hex key | 1 |
| H | Wrench | 1 |
| J | M6x20 bolts | 3 (for Base) |
| K | 6mm hex key | 1 |
| L | Top | 1 |
| M | Cylinder | 1 |
| N | Airlift lever | 1 |
| O | Top mount | 1 |
| P | Base mount | 1 |
| Q | Base | 1 |
| R | Casters | 2 |
| S | Locking casters | 2 |
| T | Hook | 1 |
Please ensure you have all parts listed. If any parts are missing, contact Seville Classics for replacements at (800) 323-5565 or email Support@SevilleClassics.com.
Use Instructions
- Roll the desk into your desired position.
- Lock the casters to prevent the table from rolling.
- To lift the desk, pull up on the Airlift lever.
- To lower the desk, pull up on the adjustment lever while simultaneously pressing down on the table top.
- Release the adjustment lever to lock the desk at the desired height.
Frequently Asked Questions (FAQs)
Q. Can I use it without the wheels?
A. No. The base is not flat and will wobble without the wheels attached.
Q. How high and how low can my desk go?
A. The maximum height is 45.6 inches. The minimum height is 30.5 inches.
Q. Why won't my desk adjust its height?
A. The adjustment wire may not be clipped into the adjustment lever correctly. Please reference the diagram in STEP 3 of the Assembly Instructions for an example.
Q. Why is my desk adjusting slowly?
A. The desk may adjust slowly after a period of disuse. To resolve this, pull up on the adjustment lever and gently "pump" the desk top up and down. The desk should then rise smoothly.
Safety Information
- Do not tip the desk over or place it upside down.
- Do not place more than 33 lbs. on the desk top.
Specifications
Dimensions: 21.6" W x 25.6" D x (30.5" to 45.6") H
Weight capacity: 33 lbs.
Weight: 32.34 lbs.
Assembly Instructions
- STEP 1: Pull AIRLIFT LEVER (N) on CYLINDER (M) through TOP MOUNT (L).
Diagram Description: Illustration shows the Airlift lever (N) connected to a cable, being threaded through the opening in the Top Mount (L) and attached to the Cylinder (M).
- STEP 2: Attach TOP MOUNT (L) to CYLINDER (M) with M8x15 BOLTS (F) and 6mm hex key (K). Press cable on AIRLIFT LEVER (N) through guides in mount.
Diagram Description: Diagram depicts the Top Mount (L) being secured to the Cylinder (M) using bolts (F) and the 6mm hex key (K). The cable from the Airlift lever (N) is shown being routed through guiding channels on the Top Mount.
- STEP 3: Press cable firmly into the bracket on the back of AIRLIFT LEVER (N).
IMPORTANT: Lever will not work and height will not adjust if wire is not clipped in correctly.
Diagram Description: Close-up view illustrating the correct method for attaching the cable to the Airlift lever (N) bracket. 'Before' shows an unclipped cable, 'After' shows the cable securely fastened.
- STEP 4: Align screw holes on assembly with TOP (L). Attach assembly with M6x15 BOLTS (D) and 5mm hex key (G). Attach AIRLIFT LEVER (N) with M6x12 BOLTS (E) and 5mm hex key (G). Tighten until snug.
Diagram Description: Illustration shows the main desk assembly being attached to the Top (L) using M6x15 bolts (D) and the 5mm hex key (G). The Airlift lever (N) is also attached to this assembly with M6x12 bolts (E) and the 5mm hex key (G).
- STEP 5: Fit BASE MOUNT (P) between BASE (Q) and CYLINDER (M). Align holes on BASE (Q) with BASE MOUNT (P).
Diagram Description: Diagram shows the Base Mount (P) being positioned between the Base (Q) and the Cylinder (M), with holes aligned.
- STEP 6: IMPORTANT: Make sure arrows on BASE (Q) and TOP MOUNT (O) point toward each other. Screws on BASE (Q) should "point" toward the AIRLIFT LEVER (N).
Diagram Description: Visual guide indicating the correct orientation for the Base (Q) and Top Mount (O) by showing directional arrows pointing towards each other. It also notes that screws on the Base (Q) should be oriented towards the Airlift Lever (N).
- STEP 7: Attach BASE (Q) with M6x20 SCREWS (J) through TOOTH WASHERS (C) and 5mm hex key (G). Tighten until snug.
Diagram Description: Illustration shows the Base (Q) being attached using M6x20 screws (J), tooth washers (C), and the 5mm hex key (G).
- STEP 8: Screw CASTERS (R) through SPLIT WASHERS (A) and WASHERS (B) into rear of BASE (Q). Repeat for LOCKING CASTERS (S). Tighten until snug with wrench (H).
Diagram Description: Diagram shows the Casters (R) and Locking Casters (S) being screwed into the rear of the Base (Q) using split washers (A), washers (B), and the wrench (H).
- STEP 9: Turn desk over to finish! Congratulations! Enjoy your new AIRLIFT Mobile Desk!
Diagram Description: Illustration shows the completed desk being turned upright.
