Hornbill H8-BF Smart Lock User Manual
This manual provides instructions for installing and using the Hornbill H8-BF Smart Lock.
In the Box
The following components are included:
- Exterior Assembly
- Interior Assembly
- Mounting Plate
- Latch
- Strike Box
- Strike Plate
- Spindle
- Screw Casing
- Key
- Mounting Plate Screws
- Interior Assembly Screws
- Latch / Strike Screws
- Drilling Template
- User Manual
Product Overview
Front View
The front of the lock features a fingerprint sensor, a keypad with numbers 0-9, *, #, a front handle, a USB-C port for emergency power, and a keyhole.
Rear View
The rear of the lock includes a battery cover, a back handle, a reset button, and an IC wire connection.
Preparation
Check Your Door Dimensions
Ensure your door meets the following specifications:
- Cross bore diameter: 54 mm (2.13 inches)
- Backset: 60/70 mm (2 3/8" / 2 3/4")
- Door thickness: 38 to 48 mm (1.5 - 1.89 inches)
- Edge bore diameter: 24 mm (0.94 inch)
Installation
Step 1: Install the Latch
Adjust the latch for a 60mm or 70mm backset by extending it if necessary. Insert the latch into the door edge, ensuring the tongue faces correctly based on your door's opening direction (inward or outward). Secure the latch with screws.
Step 2: Install the Strike Plate
Insert the strike pad into the door frame and screw the strike plate into place.
Step 3: Adjust the Handle Direction
Remove the screws from the front and back handles. For right-hand doors, turn the front handle to the right and the back handle to the left. For left-hand doors, turn the front handle to the left and the back handle to the right. Re-tighten the screws.
Step 4: Install the Exterior Assembly
Insert the spindle through the latch and door. Install the screw casings by turning them clockwise. Pass the cable under the latch and connect it to the exterior assembly.
Step 5: Install the Mounting Plate
Pass the spindle and cable through the mounting plate. Screw the mounting plate firmly to the door, ensuring proper alignment. Keep the exterior assembly straight during this process.
Step 6: Install the Interior Assembly
Connect the cable to the interior assembly and tuck any excess cable into the designated hole. Slide the interior assembly cover up and tighten the screws to secure it.
Step 7: Install the Batteries
Insert 4 new, non-rechargeable AA alkaline batteries into the interior assembly. Slide the battery cover back into place.
Test the Lock
- Keep the door open.
- Press the back handle to verify that the latch extends and retracts smoothly.
Using the App
1. Create an Account
Download the "Smart Life" app from Google Play (Android) or the App Store (iOS). Sign up and log in using an email address.
2. Pair Your Phone with the Smart Lock
Wake up the lock by pressing a key. If needed, reset the lock. Tap "Add Device" in the app, discover the lock, name it, and tap "Done".
3. Change the Admin Passcode
Once paired, the default passcode 123456 is invalid. Navigate to "Member Management" > "Admin" > "Add Code". Enter a 6-8 digit password and a code name. The first code set is the admin passcode.
4. APP Homepage Overview
The app homepage displays the lock status (locked/unlocked). You can check lock activities, set custom passcodes, manage members (passcodes and fingerprints), and receive notifications. Swipe gestures are used for locking and unlocking.
(1) Temporary Code
To manage custom codes, your phone must be within 5 meters of the lock (if not paired with a gateway). Passwords are invisible after setting. You can check, delete, change, or rename custom passcodes.
(2) Set Fingerprints (up to 50)
Go to "Member Management" > "Admin" > "Add Fingerprint" and follow the on-screen instructions. Ensure the fingerprint sensor and your finger are clean and dry for better recognition.
(3) Auto Lock & Remote Unlock
Configure "Auto Lock Delay" in "Settings" (5-60 seconds). "Remote Unlock" requires a gateway. By default, the lock automatically locks after 5 seconds.
(4) Add Member
The home owner navigates to "Me" > "Home Management" > "Your Home" > "Add Member" and shares an invitation code. The recipient joins the home using the code. Members can be assigned roles like "Common member" or "Administrator".
Basic Operations
Unlock the Door
- Option 1: Keypad - Press a key, enter passcode, press #.
- Option 2: Fingerprint - Use fingerprint recognition.
- Option 3: Mechanical Key - Use the physical key.
- Option 4: Smart Life App - Unlock via the app.
- Option 5: Voice Commands - Use Alexa or Google Home (Gateway Required).
- Option 6: Remote App Unlock - Unlock via the app if paired with a gateway.
Lock the Door
- Option 1: Auto-lock (default 5 seconds).
- Option 2: Keypad - Press # to wake, then press and hold # for 2 seconds.
- Option 3: Smart Life App - Lock via the app.
- Option 4: Mechanical Key - Use the physical key.
- Option 5: Remote App Lock - Lock via the app if paired with a gateway.
How to Reset the Lock
Unscrew the back panel. Press and hold the interior reset button for 3-5 seconds until the lock beeps and the keypad flashes green. Ensure the cable is connected and batteries are installed.
Smart Home Integration
Enable the Gateway
For remote control, add the lock to the App and then add the gateway. Plug in the gateway; its indicators should show solid blue and slow flashing red. Add the gateway to the App. Once added, the red indicator stops flashing. Pair the gateway with your smart lock. The gateway supports only 2.4GHz WiFi networks. Place the gateway within 5m/16ft of the lock and router for optimal performance.
Enable the Amazon Alexa (Gateway Required)
Ensure the lock and gateway are paired and "Remote Unlock" is enabled in lock settings. In the app, navigate to "Me" > "Alexa" and follow setup instructions. In the Alexa app, enable "Unlock by App" and "Unlock by voice" for your lock.
Enable the Google Home (Gateway Required)
Pair the Gateway with the lock. Enable "Remote Voice Unlock" and set a 4-6 digit security code. In the app, navigate to "Me" > "Google Assistant" and follow setup instructions. Google Assistant will ask for the security code to unlock the door via voice commands.
About Keypad Use
To enter single-digit numbers (e.g., 1 or 2), press the button once. To enter a two-digit number (e.g., 12), press the buttons sequentially (1 then 2).
FAQS
| Question | Answer |
|---|---|
| How to change the handle direction? | Refer to "Change the handle direction" (Page 7). |
| How to lock or unlock the door? | Refer to "Basic Operations" > "Lock the Door" & "Unlock the Door" (Page 19). |
| How can I share access to the lock with my family and friends? | Refer to "Add Member" (Page 18). |
| How to set/change the Admin passcode? | Go to "Member Management" > "Admin" > "Code". Ensure Bluetooth is on and your phone is within 5 meters of the lock. |
| How to enter the passcode on the keypad? | Press a key to light up the keypad, enter the passcode, and press # to confirm. |
| Can the lock sound be muted? | Enable Bluetooth, open the App, tap "Settings" > "Lock Volume" > "Mute". |
| How to prevent prying eyes? | Add extra digits before or after your real passcode; the lock will still unlock. |
| How to enable remote unlock? | 1. Add the gateway to the Smart Life App and pair your lock. 2. On the App homepage, tap "Settings" > "Remote Unlock" & "Remote Voice Unlock". |
Smart Lock Table
| Model | Unlocking Methods | |||
|---|---|---|---|---|
| App | Passcode (Up to 100) | Fingerprint (Up to 50) | Keys | |
| H8-BF | ✓ | ✓ | ✓ | ✓ |
Customer Service
Hornbill products come with lifetime support. For any questions, please contact Hornbill customer service.
- Toll free: 1-888-886-8355
- Support Hours: Mon-Sun: 12 pm-8 pm, 9 pm-6 am (EDT)
- Email: support@hornbilllock.com
