DOSS E-go III Portable Outdoor Speaker

Product Description

The DOSS E-go III is a portable outdoor speaker designed for on-the-go audio experiences. It offers robust sound and connectivity features for various environments.

[Image Description: A compact, square-shaped portable outdoor speaker with a textured front grille and control buttons on the top.]

Specifications

• Output Power: 8W
• Input: DC 5V - 1A
• Battery: 3.7V - 1400mAh
• Charge Time: ~ 2.5 hours
• Playtime: Up to 22 hours (at 75% volume with pink noise)
• Bluetooth Range: Up to 20m/66ft
• Net Weight: 255g/0.56lbs
• Unit Dimension: 9.7*5.1*9.7cm / 3.8*2.0*3.8 inches
• TF Card Audio Format: MP3/WAV (Max capacity 128G)

Important Notes Before Using

• To prolong the lifetime of the battery, fully charge the speaker before using it for the first time.
• The TWS feature is only available under Bluetooth mode.
• Press the volume buttons [+] and [-] simultaneously to check the version ID.
• The speaker will auto-power off after 15 minutes without audio input.
• For any assistance while using this speaker, please feel free to contact customer service at support@dossav.com.

Buttons and Controls

LED Indications

Bluetooth Mode

1. Enable the Bluetooth feature on your device.
2. Find "E-go III" on your Bluetooth device and connect it.

TWS (True Wireless Stereo) Mode

1. Press the power button twice on both E-go III speakers to enter TWS pairing.
2. Once paired, the LED of the primary speaker turns solid blue, while the second speaker's LED flashes blue.
3. Find "E-go III" on your Bluetooth device and connect it.

Using Your Speaker with Echo Dot

You can connect the Echo Dot to the speaker via Bluetooth. Please follow the steps to set up via Bluetooth:

1. Download the Alexa app and follow the steps to set up the procedure to get the Echo Dot connected to your home Wi-Fi network.
2. Switch the E-go III to Bluetooth mode. You can press the Play/pause button to re-enter Bluetooth pairing.
3. Run the Alexa app, tap Menu, and then tap Settings.
4. Tap the Echo Dot in your list of Alexa devices, then tap Bluetooth.
5. "E-go III" should appear in the list of Bluetooth devices. If not, please press the power button and try again.
6. Once listed, tap on the speaker to complete the pairing process.
7. To remove the device, return to Bluetooth > tap the name of the speaker > tap "Forget Device".

Note: Voice commands cannot turn the speaker on/off; they can only translate the sound signal.

Safety Instructions

• Avoid dropping or hitting the speaker.
• Avoid exposing the speaker to extreme temperatures.
• Avoid using the speaker near a microwave.
• Never disassemble or repair the speaker.
• Never use any corrosive cleanser or oil to clean.
• Never leave the speaker in a car parked in the sun.
• Never attempt to charge the speaker while it is wet.

Regulatory Information

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

ISED Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

CAN ICES-3(B)/NMB-3(B)

L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. Le dispositif peut être utilisé sans restriction dans des conditions portatives d'exposition. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.