DOSS Extreme Boom Pro D100 Portable Outdoor Speaker
Quick Start Guide
1. Packing Content
- 1x Extreme Boom Pro D100
- 1x USB-C Charging Cable
- 1x User Manual
2. Specifications
- Output power: 70W
- DC power input: 5V 2.5A
- Battery: 7.4V/4500mAh
- Charging time: ≤5H
- Playtime: Up to 24H (at 50% volume)
- Bluetooth version: V5.3
- Bluetooth range: Up to 82ft
- Net weight: 4.40 pounds
- Unit dimension: 12.17*5.43*5.39inches
- TF card audio format: MP3/WAV/FLAC (Max capacity 256G)
- Warranty: One-year limited
3. Important notes before using
- To prolong the lifetime of the battery, fully charge the speaker before the first time using it.
- The speaker will auto-power off after 15 minutes without audio input.
- When all buttons can't be controlled, try to reset the speaker with a paper clip (the reset button on the back of the speaker).
- If you need any assistance while using this speaker, please feel free to contact customer service at support@dossav.com.
4. Buttons and control
Button | Action | Description |
---|---|---|
Power | Press and hold | Turn on/off |
+ | Press | Volume up |
+ | Press and hold 3s | Next track |
- | Press | Volume down |
- | Press and hold 3s | Previous track |
M | Press | Switch modes among Bluetooth, TF card, and AUX-in audio modes |
M | Press and hold 2s | Restore the factory setting |
Play/Pause | Press | Play/Pause/Reconnect Bluetooth |
Play/Pause | Press and hold 2s | Disconnect Bluetooth |
EXTRA BASS | Press | Extra bass on/off |
EXTRA BASS | Press and hold 3s | Enter/exit TWS mode |
+ | Press and hold 2s | Check version ID |
M | Press and hold 2s | Remove/activate the auto-power off feature (red light on: remove, green light on: activate) |
5. LED Indications
LED | Status | Description |
---|---|---|
M | Flashing blue | Bluetooth pairing |
M | Solid blue | Bluetooth paired |
M | Solid red | Aux in mode |
M | Solid green | TF card mode |
EXTRA BASS | Solid white | Extra bass on |
EXTRA BASS | Light off | Extra bass off |
Battery LEDs | 4 white LEDs | Battery level 100% |
Battery LEDs | 3 white LEDs | Battery level 75% |
Battery LEDs | 2 white LEDs | Battery level 50% |
Battery LEDs | 1 white LED | Battery level 25% |
6. Connections
Diagram showing connections:
- 1. DC IN port (5V 2.5A)
- 2. TF-CARD slot
- 3. AUX port
- 4. RESET button
Connection examples:
- Charging: Connect the USB-C cable to the DC IN port and a power source (Max output 5V 2A).
- TF card: Insert a TF card (not supplied).
- AUX in: Connect an audio source via AUX cable (not supplied).
7. Pairing your device via Bluetooth
- Enable the Bluetooth feature on your device.
- Find "Extreme Boom Pro D100" on the Bluetooth device and connect it.
- Once paired, you can see the status "connected" on your device.
8. TWS (True Wireless Stereo) mode
- Turn on both speakers.
- Select a speaker as the primary speaker, and press and hold the EXTRA BASS button.
- Once paired, the LED of the primary speaker turns solid blue, while the second speaker turns slowly flashing blue.
- Find "Extreme Boom Pro D100" on your Bluetooth device and connect it.
Tips: Bluetooth, AUX-IN, and TF card are all supported in TWS mode, you can press the "M" button to switch modes.
9. Use your speaker with the Echo Dot
You can connect the Dot to the speaker via Bluetooth. Please follow the steps to set up via Bluetooth:
- Download the Alexa app and follow the steps to set up the procedure to get the Dot connected to your home Wi-Fi network.
- Switch the Extreme Boom Pro D100 to Bluetooth mode.
- Run the Alexa app, tap Menu, and then tap Settings.
- Tap the Echo Dot in your list of Alexa devices, then tap Bluetooth.
- The Extreme Boom Pro D100 should appear in the list of Bluetooth devices. If not, please press the power button and try again.
- Once listed, tap on the speaker to complete the pairing process.
- To remove the device, return to Bluetooth > tap the name of the speaker > tap "Forget Device".
Note: Voice command will not be able to turn on/off the speaker if you connect to it via Bluetooth.
10. Warning
- DO NOT drop, hit or shake the speaker.
- DO NOT disassemble, repair or modify the speaker by yourself.
- DO NOT use cleaning products that contain benzene, solvents or alcohol.
- DO NOT expose the speaker to excessive heat or direct sunlight for a long time.
- DO NOT store the speaker in a place with humidity or dust.
- DO NOT place heavy objects on top of the speaker.
- DO NOT use the speaker near a microwave oven or wireless LAN products.
Notice
CE: This product complies with the radio interference requirements of the European Community.
Disposal Symbol: This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
Company Information
UK REP: EVATOST CONSULTING LTD, Office 101 32 Threadneedle Street, London, United Kingdom, EC2R 8AY
EU REP: eVatmaster Consulting GmbH, Bettinastr. 30, 60325 Frankfurt am Main, Germany
Manufactured by: Wonders Technology Co.,Ltd