DOSS SoundBox H200 Home Speaker

Contact Information

For updates, promotions, and experience sharing, join our customer community.

Website: www.dossaudio.com

Social Media: [Facebook] @dossav / @dossfans, @dossdirect

Phone: 1-833-275-3677 (Mon-Fri 9AM-5PM PT, USA)

Customer Service Email: [Email] support@dossav.com

UK Representative: EVATOST CONSULTING LTD, Office 101 32 Threadneedle Street, London, United Kingdom, EC2R 8AY, contact@evatost.com

EU Representative: eVatmaster Consulting GmbH, Bettinastr. 30, 60325 Frankfurt am Main, Germany, contact@evatmaster.com

1. Packing Content

• 1 x SoundBox H200
• 1 x Type-C charging cable
• 1 x User Manual

2. Specifications

• Output: 50W
• DC power input: 5V/2A
• Battery: 7.4V 4500mAh
• Unit net weight: 2.9kg
• Charge time: 4.5 hours
• Frequency response: 40Hz-20KHz
• Unit dimension: 15.7 x 3.6 x 5.3 inches (39.88 x 9.14 x 13.46 cm)
• Play time: Up to 35 hours (at 50% volume)
• Bluetooth distance: Up to 20m/66ft
• Warranty: One-year limited

3. Important Notes Before Using

• To prolong battery life, fully charge the speaker before first use.
• Low battery is indicated by the front indicator flashing red rapidly.
• The speaker will automatically power off after 15 minutes without audio input. You can disable this function by holding the [Bluetooth Button] and [Power Button] for 2 seconds.
• If buttons are unresponsive, press and hold the [Play/Pause Button] and [Power Button] for 2 seconds to restore factory settings.
• For assistance, contact customer service at support@dossav.com.

4. Buttons and Control

5. LED Indication

6. Connections

The speaker features the following ports:

• USB-C Port: For DC power input (5V/2A) to charge the speaker.
• Aux-in Port: A 3.5mm audio input for connecting external devices (cable not supplied).
• TF Card Slot: For playing audio files from a TF card (card not supplied).
• Coaxial Input: For coaxial audio connection.
• USB-A Port: Maximum output 5V/2A, typically used for charging external devices like smartphones.

7. Bluetooth Mode

1. Place your speaker and the device within 1 meter (approx. 3 feet).
2. Press and hold the [Power Button] for 2 seconds to turn on the speaker. The speaker will enter Bluetooth pairing mode and the LED will flash blue.
3. Turn on Bluetooth on your device and select "SoundBox H200" from the list.
4. If pairing is successful, the LED will turn solid blue.

8. TWS (True Wireless Stereo) Mode

1. Turn on both speakers.
2. Select one speaker as the primary speaker. Press and hold the [TWS Button] (often marked with a star symbol). The indicator light will flash white rapidly.
3. Once paired, the primary speaker's LED will turn solid white, while the second speaker's LED will flash slowly white.
4. On your Bluetooth device, find and connect to "SoundBox H200".

Note: APE format is not supported in TWS mode.

9. Use your speaker with Echo Dot

You can connect your Echo Dot to the speaker via Bluetooth. Follow these steps:

1. Download the Alexa app and follow the standard setup procedure to connect your Echo Dot to your Wi-Fi network.
2. Switch the SoundBox H200 to Bluetooth pairing mode.
3. Open the Alexa app, tap Menu, then tap Settings.
4. Tap your Echo Dot in the list of Alexa devices, then tap Bluetooth.
5. "SoundBox H200" should appear in the list of Bluetooth devices. If not, long press the [Bluetooth Button] on the speaker and try again.
6. Once listed, tap on the speaker to complete the pairing process.
7. To remove the device, navigate back to Bluetooth settings, tap the speaker's name, and select "Forget Device".

10. Safety Instructions

• Avoid dropping, hitting, or shaking the speaker.
• Avoid exposing the speaker to extreme temperatures.
• Do not use the speaker near a microwave oven.
• Never disassemble or attempt to repair the speaker yourself.
• Never use corrosive cleansers or oils to clean the speaker.
• Never leave the speaker in a car parked in the sun.
• Never attempt to charge the speaker when it is wet.

Notices

[CE Mark] This product complies with the radio interference requirements of the European Community.

Battery Warning: CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

[Recycling Symbol] This symbol means the product must not be discarded as household waste. It should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health, and the environment. For more information, contact your local municipality, disposal service, or the shop where you purchased the product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED Statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.