BEGA 33767 Lichtbaustein® Cube Luminaire
Model: 33767
Protection Class: IP 44
Product Overview
The BEGA 33767 Lichtbaustein® (The Cube) is a versatile ceiling and wall luminaire designed for both interior and exterior lighting applications. It features a hand-blown, satin matt three-ply opal glass diffuser.
Dimensions
The luminaire has a cubic form. Key dimensions from the diagrams are approximately: Base width/depth: 205mm x 245mm. Height: 245mm. Mounting hole diameter: ø 6.5mm. Mounting hole spacing: 85mm. Luminaire depth/height: 190mm. Overall width/depth: 205mm. Side profile dimensions: 40mm, 55mm, 15mm.
Product Description
| Feature | Details |
|---|---|
| Luminaire Material | Aluminium alloy and stainless steel |
| Coating Technology | BEGA Unidure® |
| Glass Diffuser | Opal glass, satin matt |
| Mounting Holes | 2 x ø 6.5mm, 85mm spacing |
| Cable Entry | 1 x for mains supply cable up to ø 10.5mm |
| Cable Ducts | 2 x prefabricated for surface-mounted cables ø 7–10.5mm |
| Lampholder Terminal | 2.5@ |
| Earth Connection | Provided |
| Lampholder Type | E 27 |
| Safety Class | I |
| Protection Class | IP 44 (Protected against granular foreign bodies ≥ 1 mm and splash water) |
| Impact Resistance | IK03 (Protection against mechanical impacts < 0.35 joule) |
| Certifications | [safety mark] (r), [conformity mark] (c) |
| Weight | 2.8 kg |
Safety Guidelines
The installation and operation of this luminaire must comply with national safety regulations. Installation and commissioning should only be performed by a qualified electrician. BEGA is not liable for damage resulting from improper use or installation. Any subsequent modifications to the luminaire will render the modifier as the manufacturer.
Lamp Information
The luminaire is designed for a screw base E 27 lamp with a maximum output of 100 W. This product contains a light source of energy efficiency class E.
Supplied Lamp: BEGA LED lamp 13590 (LED Retrofit, 12 W, 1400 lm, 3000 K).
Luminaire Efficiency: 69%
Available BEGA LED Lamps:
- 13 584: LED 7 W · 805 lm · 3000 K
- 13 586: LED 7 W · 805 lm · 3000 K (dimmable)
- 13 588: LED 8 W · 1055 lm · 3000 K
- 13 592: LED 12 W · 1400 lm · 3000 K (dimmable)
Detailed technical and lighting data for these lamps are available on the BEGA website.
Installation
- Lead the mains supply cable through the luminaire base's cable entry.
- Secure the luminaire base to the mounting surface using the supplied or other suitable fixing materials. Ensure supplied gasket rings are used.
- Make the earth conductor connection.
- Push silicone sleeves over the connection wires and complete the electrical connection.
- Insert the lamp.
- Insert the opal glass into the fixed springs, push it to the center, and secure it with the screwable spring.
Relamping and Maintenance
- Undo the screw of the sliding spring until it stops.
- Carefully pull off the opal glass from the luminaire back housing.
- Clean the glass using only suitable cleansers. Avoid harsh solvents.
- Change the lamp.
- Place the opal glass back onto the luminaire back housing.
- Tighten the screw of the sliding spring.
- Note: Do not use high-pressure cleaners for cleaning the luminaire.
Spare Parts
- Spare glass: 11 002 243.0
- LED lamp 3000K: 13 590
- Lampholder: 63 000 105
BEGA · Das gute Licht.
