MIKS Luminaire

Safety Notes

Never work when voltage is present on the luminaire.

The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.

Risk of electrostatic discharges (ESD Norm). Handle with precautions.

Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

Do not use chemicals or abrasive products to clean the fixture.

Keep these instructions for dismantling or future maintenance.

You can consult additional information about RESISTEX luminaires on the website www.resistex-sa.com.

RESISTEX cannot be responsible for any misuse of the product.

Step 1: Mounting Base

Secure the fixture base to the mounting surface.

Step 2: Electrical Connection

Connect the electrical wires according to the diagram, ensuring proper polarity and connections.

Step 3: Main Body Assembly

Attach the main luminaire body to the base.

Step 4: Reflector/Diffuser Attachment

Install any reflectors or diffusers as required.

Step 5: Adjustments

Adjust the orientation and angle of the luminaire as needed.

Step 6: Final Checks

Perform final checks to ensure all components are secure and connections are correct.