Apexel 60X Telescope Lens with Camera Tripod

Introduction

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

Website: www.alza.co.uk/kontakt

Phone: +44 (0)203 514 4411

Importer: Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Accessories

The following accessories are included:

1. Telephoto Lens
2. Lens Bag
3. Tripod
4. Multifunctional Stretch Phone Holder
5. Silicone Eye Cup
6. Attached Ring
7. EVA Gasket (2, 3, 4 mm)
8. Cleaning Cloth

Product Introduction

Telephoto Lens Components:

1. Fixing Ring (For attaching the lens to tripod)
2. Focus Ring (To modify the focus of the subject in the photograph)
3. Eyepiece
4. Universal 1/4-inch interface (You can connect it to a tripod. The lens is securely clamped and stabilized within the ring using the bracket's 1/4-inch screw.)
5. Objective Lens

Multifunctional Phone Holder Specifications:

1. 1/4-inch nut
2. Cold Shoe Mouth
3. Phone Thickness: 6.5 – 14 mm
4. Maximum Clip Size: 96 mm
5. Minimum Clip Size: 66 mm
6. EVA Gasket
7. Phone Camera
8. Wrong Installation
9. Correct Installation

EVA Gasket Installation:

If your mobile phone camera protrudes, kindly select an EVA pad of appropriate thickness (available in 2 mm, 3 mm, and 4 mm) and adhere it to the interior of the clip (6). This will help bridge the gap on the back of the phone, aligning it with the camera (7) for a level configuration.

Installation Orientation

Please be mindful of the clip's installation orientation. If the installation direction of the phone holder is incorrect, the 17 mm threaded hole may not align with the main camera. In such cases, please flip the phone holder's direction and make another attempt (steps 8/9).

Assembly

1. Attaching the Phone Holder: Gently affix the phone holder to your device, ensuring that the circular hole in the center of the phone holder's metal plate aligns with the primary camera of your phone (1). Next, slide the phone holder's 17 mm threaded plate to center it over the primary camera (2).
2. Attach the zoom lens to the phone: Screw the lens clockwise into the 17 mm screw hole of the clip camera (4). Make sure the lens is aimed at your phone's main camera, which you can verify by looking at your screen.

   Note: If you find dark corners on the shooting screen, please use the following two adjustment methods: 1. Slightly move and adjust the lens or clip to ensure that the Apexel lens is aligned with the primary camera. 2. Zoom in the shooting magnifications.

3. Connect your phone to the tripod: Screw the tripod into the 1/4-inch screw interface of the fixed ring until the locking lens is not loose (5).
4. How to use the tripod:
   • Extend the tripod legs and fine-tune the height to your preference.
   • Secure the legs in place.
   • Release the leg locks.
   • Utilize the horizontal adjustment knob to rotate the cradle head horizontally by 360°.
   • Employ the vertical adjustment knob to rotate the quick-loading plate.
   • Use the tilt adjustment handle to rotate the cradle head by 180° in the tilt direction.

Effective Utilization of Telephoto Lens

Once you've identified the appropriate size, rotate the focus ring until the image becomes clear. Now, you are ready to capture your shot.

Beware:

• This product is fragile.
• This product is not waterproof.
• This product is not dustproof.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly. You must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

This equipment is in compliance with the essential requirements and other relevant provisions of EU directives.

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.