APEXEL MIC004 Wireless Microphone User Manual
Introduction
Thanks for choosing our product.
This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in online live broadcast, video Vlog shooting, program interview, recording, video teaching and other occasions.
The wireless Microphone consists of two parts: the Microphone transmitter and the receiver.
ID Diagram
Microphone Transmitter Components:
- ① Windproof net: Located at the top of the microphone.
- ② Microphone indicator: Shows the status of the transmitter.
- ③ Microphone charging port: For charging the transmitter.
- ④ Microphone clip: For attaching the microphone to clothing.
- ⑤ Switch key: For powering the microphone on/off and other functions.
- ⑥ Microphone reset key: For resetting the transmitter.
Receiver Components:
- ① Phone port: Connects the receiver to a smartphone.
- ⑧ Receiver indicator: Shows the status of the receiver.
- ⑨ Receiver reset key: For resetting the receiver.
Visual Representation: The diagram shows the microphone transmitter and the receiver, with labels pointing to their respective parts.
How to Use
- Step 1: Connect the receiver to the phone using the phone port.
- Step 2: Press the switch key of the microphone. The indicator light turns green, indicating the transmitter is powered on.
- Step 3: The receiver's indicator light remains solid red. Open the phone's camera, live streaming app, or other recording apps to use the microphone for sound input.
Note on Phone Compatibility: For OPPO, VIVO, IQOO, and Realme brand mobile phones, you may need to go to the phone's settings, search for "OTG", and enable "OTG power supply" for the microphone to function correctly.
Indicator Status: The receiver indicator light shows a solid red light when ready.
Special Note
Regarding the receiver's port (labeled ⑩ in diagrams): The receiver itself does not have a built-in battery and does not require charging during live streaming. However, if your phone's battery is low during a live session, you can use the receiver's port to charge your phone directly.
About UI
Microphone Transmitter
| Function/Status | Operation | Light Indicator |
|---|---|---|
| Power on | Press switch key once | Green light on |
| Power off | Press switch key about 3 seconds | Light off |
| Search/Pairing | Press switch key once | Red and green flash alternately |
| Paired | (Implicit after pairing) | Green light keeps on |
| Pause | Press switch key once | The green light flashes slowly during pause |
| Reset | Press reset key for 3 seconds | (No specific light mentioned, implied reset action) |
| Low battery alarm | Power on state | The red and green lights come on every 10 seconds |
| Charging | Charging with cable | The red light goes out when it is fully charged |
Receiver
| Function/Status | Operation | Light Indicator |
|---|---|---|
| Power on | Plug in the device | Red light on |
| Power off | Plug off the device | Light off |
| Search/Pairing | (Implicit connection) | Red light flashes slowly |
| Paired | (Implicit after pairing) | Red light on |
Packing List
- (1) Microphone transmitter
- (2) Receiver
- (3) Charging cable
- (4) User manual
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
