BISSELL PowerGlide® Pet Slim Corded Vacuum Series 3070

Product Overview

This section details the components of the BISSELL PowerGlide® Pet Slim Corded Vacuum.

Go online for a comprehensive walkthrough of your new purchase! ? This guide provides essential information for setup, usage, and maintenance. For additional resources like tips, troubleshooting, videos, and product registration, visit support.BISSELL.com.

Important Safety Instructions

READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM. When using an electrical appliance, basic precautions should be observed, including the following:

WARNING

THIS APPLIANCE HAS A POLARIZED PLUG. This plug will fit in a polarized outlet only one way. If the plug does not fit fully, reverse the plug. If it still does not fit, contact a qualified electrician. Do not change the plug.

SAVE THESE INSTRUCTIONS. THIS MODEL IS FOR HOUSEHOLD USE ONLY.

Warranty

A 2-Year limited warranty is provided, which may vary by state. For complete warranty information, visit support.BISSELL.com or call 1-800-237-7691.

What's in the Box?

Standard accessories may vary by model. Refer to the "Carton Contents" list on the underside of the insert inside the carton for your specific purchase.

Assembly

For assembly videos, visit support.BISSELL.com.

  1. Connect the Extension Wand to Motorized Floor Cleaning Foot. You'll hear a "click" when they're connected.
  2. Connect the Hand Vacuum to the Extension Wand. You'll hear a "click" when they're connected.
  3. Wrap cord on the side of the product where the cord clips are located.

Installing the Wall Mount & Tool Storage Station

For more tips and video instructions, visit support.BISSELL.com.

  1. Insert tool holder on the side of the wall mount.
  2. Screw the wall mount into a wall. A wall stud provides best support. Ensure the mount is high enough off the ground for the vacuum to hang comfortably.
  3. Hang the vacuum on the center storage piece and insert tools on the tool holder provided.

Installing the Optional Febreze Filter

For tips on maintaining and replacing your vacuum filter, visit support.BISSELL.com.

  1. To change the filter: Turn OFF the machine and remove the Dirt Tank from the Hand Vacuum by pressing the Tank Release Button and sliding the tank out.
  2. Twist top to remove filter frame from the separator. Remove the filter from the filter frame housing.
  3. Replace with the Febreze filter and reinstall the filter frame.

Using the Vacuum

For more guidance, visit support.BISSELL.com for tips and 24-7 support.

The PowerGlide® Pet Slim can be used as a stick vacuum, hand vacuum, or for extended reach with the Hand Vacuum and Extension Wand.

  1. Power Switch: Slide the Power Switch down to begin cleaning and back up to turn the machine OFF when finished cleaning.
  2. Choose your cleaning mode:
    • Hard Floor Mode: Slide the Power Switch down 1 notch. This mode is great for hard floors, low pile carpets, and area rugs, providing a quieter sound. The Brush Roll does not spin in this mode.
    • Area Rug Mode: Slide the Power Switch down 2 notches. This mode is recommended for maximum suction and provides the most powerful clean, suitable for high, medium, and low pile carpet.

Attaching Tools for Hand Vac Use

For tips on above-floor cleaning tools, visit support.BISSELL.com.

Clean stairs or furniture easily with the provided tools. Pair your desired tool with the Hand Vacuum or Extension Wand. Ensure the vacuum is OFF when connecting tools.

  1. To use as a Hand Vacuum: Press the release button to disconnect it from the Extension Wand.
  2. Attach your chosen tool.
  3. Use the tool to clean furniture, stairs, or other surfaces in your home.

Emptying the Dirt Tank

For additional how-to videos, visit support.BISSELL.com.

  1. Turn OFF your machine. Remove the Dirt Tank from the Hand Vacuum by pressing the Tank Release Button on the front of the tank.
  2. Grab the middle grip from the filter and pull up. This activates a wiping feature to remove debris from the mesh filter screen. Twisting the grip removes the filter only.
  3. Fully remove the separator from the tank and tap the mesh screen on the side of the trash bin.
  4. Dump dirt from the tank into the trash bin.
  5. Slide the separator back into the tank, ensuring the notch is seated correctly.
  6. Put the whole tank into the Hand Vacuum by guiding the notched area on the bottom of the tank onto the hook on the Hand Vacuum. Push into place.

WARNING: Do not use your vacuum until you are familiar with all instructions and operating procedures. Before using, ensure the Dirt Tank is locked and the filter is in place. DO NOT operate your vacuum without the filter.

Cleaning & Replacing the Filter

For tips on maintaining and replacing your vacuum filter, visit support.BISSELL.com.

For best cleaning performance, always clean your filter after each use.

  1. Turn machine OFF. To clean the filter, remove the Dirt Tank by pressing the Tank Release Button and sliding the tank out.
  2. Twist top to remove filter frame from the separator. Remove the filter from the filter frame housing. Tap the filter against the side of a trash bin to remove dust and debris.
  3. To clean: Rinse under warm water and squeeze to remove dirt. Lay out for 24 hours ⏳, until completely dry. Ensure you reinsert your filter into the frame with the tag side down (touching the frame) before using your machine.

Maintaining the Pet TurboEraser® Tool

For additional accessories and replacement tools, visit support.BISSELL.com.

  1. Twist gray collar counter-clockwise, until a slot appears, then separate the faceplate.
  2. Remove Brush Roll, Belt, and Paddle Wheel. Inspect for damages and replace if necessary.
  3. To reassemble: Align the two clips on each end of the Paddle Wheel with the Belt and pop back into place. Place the Brush Roll with Belt back in. The faceplate will not close properly if all parts are not aligned correctly.
  4. To put the faceplate back on: Align the tabs in the top of the cover and place it down to "click" into place.

Maintaining the Brush Roll

For tips on maintaining and replacing your Brush Roll, visit support.BISSELL.com.

  1. Turn the machine OFF and press the Foot Release Button to disconnect the Motorized Cleaning Foot.
  2. Twist the bottom screws with a coin to remove the bottom cover.
  3. Remove the Brush Roll cover and clear any debris from the Brush Roll.
  4. Reattach Brush Roll by inserting it into the belt and pressing it into place.
  5. Attach and secure the bottom cover.

Troubleshooting

For a comprehensive walkthrough of your product and support, visit support.BISSELL.com.

This guide provides everything you need for first use, including setup, usage, and maintenance. Online resources offer additional tips, troubleshooting, videos, product registration, and parts.

Problem Possible Cause Remedies
Vacuum won't pick up dirt Filter is dirty. Remove and rinse the filters. Allow enough time to dry properly before reinserting.
There is a clog in the vacuum. Remove the Foot and Extension Wand from the Hand Vacuum. Check for debris buildup or clogs in each section. Clear any debris or clogs before reassembling.
Dirt is escaping from the vacuum Dirt Tank is not seated correctly. Remove the tank and reseat properly.
Dirt Tank is full. Empty the tank.
Filter is missing or dirty. Check to see if the filter is in place. Clean if necessary.
There is a clog in the vacuum. Remove the foot and Extension Wand from the Hand Vacuum. Check for debris buildup or clogs in each section. Clear any debris or clogs before reassembling.
Brush Roll doesn't rotate Wrong power mode is being used. Make sure switch is pushed all the way to Area Rug Mode.
Brush Roll has lodged debris or other entanglements, keeping the brush from rotating. Unplug to reset brush motor, checking for and removing debris before turning ON. If problem persists, disconnect Foot, remove bottom cover, and clear debris & suction path.

WARNING: To reduce the risk of fire, electric shock, or injury, turn power OFF and disconnect the plug from the electrical outlet before performing maintenance or troubleshooting.

We're Waggin' Our Tails!

BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too. BISSELL designs products that help make pet messes, odors, and pet homelessness disappear. Visit BISSELLsavespets.com to learn more.

But wait, there's more!

Join us online for a complete guide to your new product, including troubleshooting, product registration, parts, and more. Go to support.BISSELL.com.

PDF preview unavailable. Download the PDF instead.

B1cvDMKtbjS Adobe PDF Library 15.0 Adobe InDesign 15.0 (Macintosh)

Related Documents

Preview BISSELL PowerClean Pet Slim Corded Vacuum Series 3339 User Manual
User manual for the BISSELL PowerClean Pet Slim Corded Vacuum Series 3339, providing comprehensive instructions on setup, operation, maintenance, troubleshooting, and warranty information.
Preview BISSELL Pet Hair Eraser Pro Corded Stick Vacuum Series 2831 User Guide
Comprehensive user guide for the BISSELL Pet Hair Eraser Pro Corded Stick Vacuum Series 2831, covering assembly, operation, maintenance, troubleshooting, and warranty information. Includes safety instructions and product overview.
Preview BISSELL PowerGlide Pet Slim Cordless Vacuum Cleaner User Guide
Comprehensive user guide for the BISSELL PowerGlide Pet Slim Cordless Vacuum Cleaner, 3080 Series. Includes setup, operation, maintenance, troubleshooting, and warranty information.
Preview BISSELL PowerClean Rewind Pet Upright Vacuum 2494 Series User Manual and Guide
Comprehensive user manual for the BISSELL PowerClean Rewind Pet Upright Vacuum, 2494 Series. This guide provides essential safety instructions, assembly steps, operation details, maintenance procedures, troubleshooting tips, and warranty information.
Preview BISSELL Pet Hair Eraser Slim Corded Vacuum Cleaner Manual
User guide for the BISSELL Pet Hair Eraser Slim Corded Vacuum Cleaner, Series 2897. Includes setup, usage, maintenance, and troubleshooting instructions.
Preview BISSELL CleanView Swivel Pet Rewind User Guide (2254, 2256 Series)
Comprehensive user guide for the BISSELL CleanView Swivel Pet Rewind vacuum cleaner, covering safety instructions, assembly, operation, maintenance, troubleshooting, and warranty information.
Preview BISSELL Cleaning Products for a Spotless Home
Discover BISSELL's range of cleaning solutions, including steam cleaners, portable deep cleaners, and vacuums, designed to tackle tough messes and keep your home clean. Learn about BISSELL's commitment to supporting the BISSELL Pet Foundation.
Preview BISSELL CrossWave Pet Pro User Guide: Operation, Maintenance, and Troubleshooting
Comprehensive user guide for the BISSELL CrossWave Pet Pro (2305, 2306 Series). Learn about safety instructions, assembly, cleaning hard floors and area rugs, maintenance, troubleshooting, and warranty information.