BJÖRKSTA
Product Overview
The BJÖRKSTA frame is available in multiple sizes to accommodate different artwork and display needs.
Available Sizes:
- 118x78 cm (46 2/4x30 3/4")
- 140x56 cm (55x22")
- 140x100 cm (55x39 1/4")
- 200x140 cm (78 3/4x55")
Important Note on Wall Mounting
As wall materials vary, screws for fixing the frame to the wall are not included. For advice on suitable screw systems, please contact your local specialized dealer.
Assembly Instructions
Step 1: Assemble Frame Structure
Begin by preparing the frame components. You will need the long frame pieces and connecting brackets.
Parts required for this step:
- Connecting Bracket (Part 148910): 4x
- Allen Key (Part 100006): 1x
- Nuts (Part 122044): 16x
Action: Connect the frame pieces using the provided brackets and fasteners. Use the Allen key to tighten the nuts securely.
Visual Aid: Diagrams illustrate attaching the brackets to the frame corners, securing them with nuts, and tightening with the Allen key.
Step 2: Prepare Frame
This step involves completing the assembly of the frame structure itself, ensuring all parts are correctly fitted.
Visual Aid: The diagram shows the assembled frame structure, indicating how the components fit together.
Step 3: Wall Mounting Preparation
Prepare the wall for hanging the frame. This involves marking the wall, drilling, and installing the necessary wall fixings.
Parts required for this step:
- Wall Bracket/Hook (Part 149730): 2x
- Washer (Part 100827): 2x
- Screws (not included; select appropriate type for your wall material)
Action: Use a spirit level ? and pencil ✏️ to mark the desired position on the wall. Install the wall brackets securely using appropriate screws and washers. Ensure the brackets are level and firmly attached.
Visual Aid: Diagrams show using a spirit level to mark the wall, inserting screws into wall fixings, and a close-up of the wall bracket and screw assembly. A warning symbol ❌ indicates incorrect screw usage or placement.
Step 4: Hang the Frame
Carefully lift and hang the assembled BJÖRKSTA frame onto the installed wall brackets.
Visual Aid: The diagram shows the frame being hung onto the wall-mounted brackets.
Parts List
The following components are typically included or used in the assembly:
- Long Frame Pieces (quantities vary by frame size)
- Connecting Bracket (Part 148910): 4x
- Allen Key (Part 100006): 1x
- Nuts (Part 122044): 16x
- Wall Bracket/Hook (Part 149730): 2x
- Washer (Part 100827): 2x
Note: Wall mounting screws and wall plugs are not included and must be purchased separately based on your wall type.
