GULLIVER Crib Assembly Instructions
By IKEA
Overview
Tools Required
You will need the following tools for assembly:
- Phillips head screwdriver ?
- Hammer ?
Assembly Tips
Ensure you have adequate space for assembly. Two people may be helpful for certain steps ???.
Avoid placing excessive weight or sitting on unassembled parts ??.
Customer Support
If you encounter issues or need assistance, please contact IKEA ?.
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 100001 | Screw | 16x |
| 100108 | Screw | 8x |
| 101351 | Dowel | 8x |
| 10050797 | Cam bolt | 4x |
| 148624 | Cam lock | 4x |
| 100514 | Screw | 12x |
| 119245 | Dowel | 4x |
| 128546 | Screw | 4x |
| 147164 | Screw | 4x |
Assembly Steps
Step 1: Prepare End Panels and Attach Side Panels
Insert 2 dowels (101351) into the pre-drilled holes on each end panel. Attach the side panels to the end panels using 4 screws (100001), 4 screws (100514), and 4 screws (100108) for each side. This forms the main frame of the crib.
Diagram Description: Shows end panels with dowels inserted, and side panels being attached with screws.
Step 2: Attach Base Slats
Insert 4 cam bolts (10050797) into the base slats. Attach the base slats to the inside of the side panels. Secure each slat by inserting a cam lock (148624) into the corresponding hole on the side panel and turning it to lock onto the cam bolt. Use 4 screws (100001) to further secure the base structure.
Diagram Description: Shows base slats being attached to the side panels using cam bolts and cam locks. Includes visual cues for correct cam lock insertion (✔️) and incorrect insertion (❌).
Step 3: Insert Back Panel
Carefully turn the crib structure upright. Slide the back panel into the grooves provided on the inner sides of the end panels.
Diagram Description: Shows the crib structure being turned and the back panel being slid into place.
Step 4: Attach Top Rails
Insert 4 dowels (101351) into the top holes of the side panels. Place the top rails onto the side panels, aligning them with the dowels.
Diagram Description: Shows dowels being inserted into the top of the side panels, and top rails being placed on top.
Step 5: Secure Top Rails
Secure the top rails by inserting 4 screws (100001), 4 screws (100108), and 4 screws (100514) through the top rails into the side panels.
Diagram Description: Shows screws being driven into the top of the crib frame to secure the top rails.
Step 6: Attach Base Supports
Attach the base supports to the bottom of the crib frame using 4 screws (128546).
Diagram Description: Shows the base supports being attached to the bottom of the crib.
Step 7: Attach Final Side Panel
Insert 4 dowels (119245) into the remaining end panel. Attach the final side panel using 4 screws (147164).
Diagram Description: Shows the final side panel being attached to the crib structure.
Step 8: Mattress Installation
Place the mattress into the crib. The mattress should measure 60 x 120 cm (47 1/4" x 23 5/8"). Ensure the mattress thickness does not exceed 12 cm (4 3/4").
Diagram Description: Shows a mattress being placed in the crib, with dimensions indicated. Includes a warning icon (⚠️) for maximum mattress thickness and a visual showing incorrect mattress placement (❌).
