SUNDVIK Cot Assembly Instructions
This document provides step-by-step instructions for assembling the IKEA SUNDVIK cot. Please ensure you have all parts before beginning.
Required Tools
- Screwdriver (Phillips head) ?
- Hammer ?
Parts List
- 8x Screw (105907)
- 8x Dowel (101351)
- 4x Cam Lock Nut (148624)
- 4x Screw (147168)
- 8x Cam Lock (100514)
- 1x Allen Key (100092)
- 4x Bracket (119245)
- 4x Bracket (128546)
- 4x Screw (10050797)
Assembly Steps
- Attach side rails to the headboard and footboard using dowels (101351) and screws (105907). Ensure the correct orientation as shown in the diagram.
- Connect the two assembled sides using the provided hardware. Insert screws (105907) and secure with cam locks (100514). Use the Allen key (100092) for tightening.
- Attach the base support rails. Insert dowels (101351) and secure with screws.
- Attach the top rails. Use screws (105907) and cam locks (100514).
- Secure the mattress base supports using brackets (128546) and a hammer.
- Attach the cot sides to the base structure. Use screws (10050797) and cam locks (100514).
- Place the mattress support into the cot frame. Ensure it is correctly positioned.
- Secure the mattress support using screws (100092) and cam locks (148624).
- Attach the remaining cot sides using screws (147168) and brackets (119245).
Important Information
- Mattress size: 60 x 120 cm (47 1/4" x 23 5/8").
- Maximum mattress thickness: 12 cm (4 3/4").
- Ensure all screws are tightened securely before use.
- Periodically check and retighten all fittings.
- Do not use the cot if any part is missing or damaged.