Power the Dash Cam
Use one of the following options to power your dash cam. The included cable options may vary depending on the dash cam model purchased.
-
[12V Power Cable]: Connects to your vehicle's 12V power outlet.
Visual description: A coiled cable with a cigarette lighter plug on one end and a connector for the dash cam on the other.
-
[Hardwiring Cable]: For a more permanent installation, this cable connects directly to your vehicle's fuse box.
Visual description: A cable with an OBD-II connector on one end and wires for connecting to the vehicle's power system on the other.
-
[OBD-II Cable]: Connects to your vehicle's OBD-II port for power.
Visual description: A cable with an OBD-II connector on one end and a connector for the dash cam on the other.
*To enable Parking Surveillance mode, the dash cam needs to be powered by either the OBD-II Cable or Hardwiring Cable. Professional installation is recommended for the Hardwiring Cable.
Download and Connect to the App
Download the App
Download the THINKWARE DASHCAM LINK App on your smartphone. Open the Google Play Store (for Android) or Apple App Store (for iOS) and search for "THINKWARE DASHCAM LINK" to download and install it.
[QR code for Apple App Store]
[QR code for Google Play Store]
Visual description: The THINKWARE DASHCAM LINK app logo is displayed.
Connect to the App
Follow the on-screen instructions within the app to connect to your dash cam.
- Press the Wi-Fi button ? on the Dash Cam.
The Wi-Fi LED will flicker blue when the Wi-Fi is active.
Visual description: A diagram shows the dash cam unit. An arrow points to the Wi-Fi button labeled "Press". The Wi-Fi LED is indicated and described as "Blue Flickers". Status indicators like [Wi-Fi Icon], [REC Icon], [STATUS Icon] are visible.
If you encounter issues connecting, please refer to the "Won't connect to the App?" section or support resources.
Install the Cameras
Install the Front Camera
Follow the installation guide to mount the front camera on your windshield.
Visual description: A diagram illustrates mounting the front dash cam on the windshield. An instruction "How to Install" is present.
Open Live View in the app:
- Blue line: Aligns with the center of the screen.
- Green line: Aligns with the front edge of the hood.
Visual representation: A smartphone screen shows guide lines. The blue line is in the center, and the green line is positioned at the bottom, representing the hood's edge.
Install the Rear View Camera
Follow the installation guide to mount the rear view camera inside your vehicle.
Visual description: A diagram shows the rear dash cam being installed inside a car, near the rear window. Steps are indicated by numbers 1, 2, 3 and a "Click" sound is implied.
Open Live View Rear Camera in App:
- Red line: Aligns with the trunk center.
- Yellow line: Aligns with the center of the horizon.
- Green line: Aligns with the trunk line.
Visual representation: A smartphone screen shows guide lines for the rear camera. The red line is at the bottom, the yellow line is in the middle representing the horizon, and the green line is slightly above the red line, representing the trunk line.
Dash Cam Settings in the App
Default settings out of the box:
The default settings are as follows, and you have the option to adjust them according to your preference within the THINKWARE DASHCAM LINK app.
| Options | Description |
|---|---|
| Voice Recording | Enabled |
| System Volume | 0 1 2 3 |
| Parking Mode | Disabled |
| Super Night Vision | Parking Mode |
| ADAS | Disabled |
| Speed Stamp | Enabled |
| Safety Camera | Enabled |
FAQ & Help Desk
Still have questions or issues?
For further assistance or to report any issues, please contact the THINKWARE support team.
Contact Information:
- North America: 1 (844) 865-9273, support@thinkware.com
- United Kingdom: 44 (0) 333-121-0008, support.eu@thinkware.com
- European Union: (+49) 69-943-22200, support@thinkware.com
Please refer to the CS Information QR code provided in the product box for support in other countries.
[QR code for FAQs & Help Desk]
