THINKWARE DASH CAM™ ARC 700 Quick Start Guide -1CH

Introduction

This guide provides essential information for setting up your THINKWARE DASH CAM™ ARC 700 (1CH model).

Power the Dash Cam

Use one of the following options to power your dash cam. The included cable options may vary depending on the dash cam model purchased.

Illustration shows three power cable options:1. A 12V Power Cable, designed to plug into a vehicle's cigarette lighter socket.2. A Hardwiring Cable, featuring a fuse tap and bare wires for connection to the vehicle's electrical system. Marked with an asterisk (*).3. An OBD-II Cable, for connection to the vehicle's OBD-II port. Marked with an asterisk (*).

• To enable Parking Surveillance mode, the dash cam needs to be powered by either the OBD-II Cable or Hardwiring Cable (professional installation recommended).
• THINKWARE strongly recommends professional installation by a trained mechanic. Contact an authorized service center to connect the hardwiring cable to the vehicle. If the product is not installed properly, the product may be damaged, or an electrical fire or electrocution may occur.

Download the App

Download the THINKWARE DASHCAM LINK App. On your smartphone, open the Google Play Store or Apple App Store and download and install THINKWARE DASH CAM LINK.

Illustration of the THINKWARE DASH CAM LINK app icon: a black square with a camera lens and the THINKWARE logo inside.

Two QR codes are displayed side-by-side. The left QR code is labeled "Apple Store (iOS)". The right QR code is labeled "Google Play Store (Android)". These codes link to the respective app stores for downloading the application.

Connect to the App

Follow the on-screen instructions in the app to connect.

1. Press the Wi-Fi ? button on the Dash Cam for at least 3 seconds.
2. Hold for more than 3 sec.
3. Wi-Fi LED Blue Flickers.

Illustration of the THINKWARE DASH CAM unit. Number '1' points to the Wi-Fi button area, indicating a press-and-hold action. Number '2' points to an LED indicator, showing its state as flickering blue. The device is labeled "4K-QHD DIGITAL RECORDER" and has buttons for REC, GPS, FORMAT, RESET.

If you cannot connect to the app, a QR code is provided for troubleshooting assistance.

Install the Front Camera

Selecting an installation location

Install the front camera at the center of the windshield without blocking the driver's view while driving.

Illustration shows the interior of a car windshield. A dash cam is depicted mounted near the rearview mirror, within a dashed outline indicating the recommended placement area. A QR code labeled "How to Install" is shown to the right.

• Remove the protective film from the dash cam lens before installation.

Open Live View in the app

Use the app's live view feature to ensure correct alignment.

Illustration of a smartphone screen displaying a live camera feed from the dash cam. Two horizontal lines are overlaid on the image: a "Blue line" is positioned to align with the center of the road or horizon, and a "Green line" is positioned to align with the front edge of the vehicle's hood.

Dash Cam Settings in the App

Default settings out of the box are as follows. You have the option to adjust them according to your preference.

FAQ & Help Desk

Still have questions or issues? For further assistance or to report any issues, please contact the THINKWARE support team.

• North America
  Phone: 1 (844) 865-9273
  Email: support@thinkware.com
• United Kingdom
  Phone: 44 (0) 333-121-0008
  Email: support.eu@thinkware.com
• European Union
  Phone: (+49) 69-943-22200
  Email: support@thinkware.com

A QR code is displayed, labeled "FAQs & Help Desk". This code provides access to frequently asked questions and support resources.

Please refer to the CS Information QR in the product box for other countries.