Assembly Instructions
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come loose inside the carton during shipment. Identify and count all items and compare with the PARTS LIST and/or HARDWARE LIST shown below.
CAUTION: Read the instructions carefully before assembly.
- We recommend that you assemble this product with the assistance of another person to eliminate damage to the product during assembly.
- When you want to reposition the product, please always “LIFT & MOVE”.
Tools Required
2 - People
Assembly Rating
The Assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.
EASY ⚪⚫⚫⚫⚫ DIFFICULT
Check Before Starting
- Are you missing anything? Double-check all parts, hardware and accessories listed are all accounted for.
- Should we send any replacements? Are there any irregularities or flaws in the parts? We can send replacements!
- Check out our Quick Tips! We recommend reviewing the pre-assembly handouts. Even experts need a refresher now and then!
- Prep Time! Please review the assembly instructions and all diagrams prior to assembling.
Pre Assembly Introduction
We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process.
- Teamwork: ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage. [two people carrying a box]
- Suitable Location: Assembling near the area of the intended location is highly recommended. [person assembling furniture near a window]
- Sufficient Space: Make sure you have enough space to move around during the assembly. [person struggling to move around in a small space]
- Avoid Scratches: Use cardboard, blankets or a carpeted area while assembling furniture to prevent scratches and damages. [furniture being protected by blankets and cardboard]
- Flat Surface: Make sure the furniture rests on a flat and level surface with each leg evenly touching the floor. [furniture with all legs on a flat surface]
Assembly and Care Advice
FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. ⚠️
- Position each part correctly and insert screws or bolts into their respective holes. [screw being inserted into a hole]
- Turn clockwise to tighten and only tighten when step is completed or when instructed to do so. [arrow indicating clockwise rotation]
- Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and/or bolts, may require hand tools to avoid causing damage during assembly. [toolbox with various tools]
- Save the instructions and store any supplied tools for later maintenance.
- After two weeks, check and tighten any loose hardware and repeat again every six months thereafter. [person tightening a screw]
IT IS THE USER'S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE HARDWARE MAY LOOSEN OVER TIME AND MAY CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO SUPPORT ITS INTENDED WEIGHT CAPACITY. THIS MAY LEAD TO COLLAPSE AND MAY CAUSE SERIOUS INJURY.
Parts List
| NO. | DESCRIPTION | SKETCH | QTY (PCS) | NO. | DESCRIPTION | SKETCH | QTY (PCS) |
|---|---|---|---|---|---|---|---|
| A | SEAT FRAME | [image of seat frame] | 1 | 1 | FLAT WASHER Ø5/16 x 3/4" | [image of flat washer] | 11 |
| B | LEFT SIDE FACING (LSF) ARM | [image of left arm] | 1 | 2 | WASHER Ø5/16 x 1/2" | [image of washer] | 11 |
| C | RIGHT SIDE FACING (RSF) ARM | [image of right arm] | 1 | 3 | BOLT Ø5/16 x 2" | [image of bolt] | 8 |
| D | BACKREST | [image of backrest] | 1 | 4 | ALLEN KEY Ø5/16 x 3/4" | [image of allen key] | 1 |
| E | SEAT CUSHION | [image of seat cushion] | 1 | 5 | THREAD BOLT Ø5/16 x 3" | [image of thread bolt] | 3 |
| F | MIDDLE LEG | [image of middle leg] | 1 | 6 | HEX NUT Ø5/16 x 1/2" | [image of hex nut] | 3 |
| G | SQUARE PILLOW | [image of square pillow] | 2 | 7 | WRENCH 1/2" x 3½" | [image of wrench] | 1 |
| H | KIDNEY PILLOW | [image of kidney pillow] | 1 | ||||
| I | SOLID PILLOW | [image of solid pillow] | 2 |
Assembly Steps
STEP 1:
Lay the seat frame (A) on its backside to reach the holes to secure the bolts for the arms. Align and assemble the LSF arm (B) and RSF arm (C) to the seat frame (A) by using the Allen Key (4) with hardware 1, 2, and 3. Screw the support legs (F) to the bottom of seat frame (A).
[Diagram showing seat frame, arms, legs, and hardware being assembled]
STEP 2:
Place the backrest (D) on its backside. Install the thread bolt (5) into the hole on the bottom of the backrest (D) by using your hands to rotate the bolt about 25 mm into the backrest (D).
[Diagram showing backrest with thread bolt being inserted]
STEP 3:
Place the frame up right and install the backrest (D) to the LSF arm (B) and RSF arm (C) by sliding the brackets all the way until it is secured.
[Diagram showing backrest being attached to the assembled frame]
STEP 4:
Place the chair on its back on a clean and soft surface to reach the thread bolt (5). Secure the backrest (D) to the seat frame (A) by using the Wrench (7) with hardware 1, 2, and 6.
[Diagram showing the underside of the chair with backrest being secured with hardware]
STEP 5:
Place the chair up right and install the seat cushion (E) to the seat frame (A).
FINISH
[Diagram showing the completed sofa with seat cushion and pillows]
