NUX DA-30BT Personal Monitor Amplifier User Manual

Introduction

Thank you for purchasing the NUX DA-30BT Personal Monitor Amplifier. Please take the time to read this user manual for the most effective use of the device.

Front Panel

Controls and Indicators

• Indicator: The indicator lights red when power is on; it lights orange when Bluetooth is successfully connected.
• BLUETOOTH: The Bluetooth function is activated simultaneously with turning on the power. Select "DA-30BT" as the paired device. After successful connection, you will hear a sound, and the LED indicator will turn orange.
• INPUT 1 JACK: Connect your device to this input, such as an electric drum, keyboard, etc.
• INPUT 2 JACK: Connect another device to this input, such as an electric drum, keyboard, etc.
• INPUT 1 LEVEL CONTROL: Volume adjustment control for the first channel.
• INPUT 2 LEVEL CONTROL: Volume adjustment control for the second channel.
• BASS CONTROL: Low-frequency level control.
• TREBLE CONTROL: High-frequency level control.
• AUX INPUT JACK: Connect the output of an MP3 or CD player to this jack.
• POWER INDICATOR: The indicator lights up when power is on.

Rear Panel

Connections and Safety

• AC IN JACK: Connect the supplied AC power cable to this jack.
• FUSE HOLDER: Location for the fuse.

Safety Precautions

PRECAUTIONS: READ THESE INSTRUCTIONS BEFORE USING THE DEVICE

• Use only the supplied power source and cable. If you are unsure of the power parameters in your general utility network, contact your dealer or local electricity supplier.
• Do not break off the grounding terminal from the power cord.
• Do not attempt to install a 'jumper' fuse or use a fuse of a different rating.
• Do not attempt to repair the device yourself, as removing covers may expose you to the risk of electric shock and other hazards. Allow qualified specialists to perform repairs. Repair is necessary if the device has been damaged in any way, for example, if the plug or power cord is damaged, liquid or foreign objects have entered the device, the device has been exposed to rain or moisture, it is not functioning normally, or it has been dropped.
• Do not remove safety features from the polarized plug or grounded plug. A polarized plug is a plug where one blade is wider than the other (for 110-volt power). A grounded plug has two blades and a grounding prong. The wider blade and third prong are for safety. If the supplied plug does not fit your power outlet, consult an electrician about replacing the outlet.
• Do not use the device in damp or wet conditions.
• The power cord should be unplugged from the outlet if you are not using the device for a long period of time.
• Do not step on the cord and avoid kinks, especially near the plug and the device socket.
• When the appliance or mains plug is used to disconnect the device, the device's power switch will remain in the ON position.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. THIS APPARATUS MUST BE EARTHED TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH LIMITS FOR A CLASS B DIGITAL DEVICE PURSUANT TO PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRABLE OPERATION.

Fuse Replacement

Install a 5A/250V fuse in the power socket.

Specifications

Distributor Information

Official distributor: DJPOWER - LUTNER SPb. Website: www.LUTNER.ru