Introduction
Thank you for purchasing the NUX PA50 personal monitor. Congratulations on your choice! Please take the time to read this user manual for the most effective use of the device.
Device Description
The NUX PA50 is a powerful monitor designed for electronic drums, vocals, keyboards, acoustic, and electric instruments. As a full-featured monitor, the PA50 can fully represent the tonal richness characteristic of all types of instruments. With its dual-channel input, 3-band equalizer, 1" tweeter, and 6.5" subwoofer, the PA50 is ideal for small gigs, studio recording, or live performance.
Features
- Dual input channels
- 3-band equalizer
- 50W RMS output power
- High-sensitivity 6.5" subwoofer, 1" tweeter
- 1/8" AUX IN jack
Warnings and Safety Precautions
General Warnings
To avoid fire or electric shock, do not expose the unit to rain or moisture.
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Important Symbols
- ⚡ [High Voltage Symbol]: Indicates information about operating voltage and potential risks of electric shock.
- ⚠️ [Caution Symbol]: Please read the information next to all warning signs.
Usage Precautions
- Use only the supplied power source and cord. If you are unsure of the power parameters in your general power network, contact your dealer or local power supplier.
- Do not break off the grounding terminal of the power cord.
- Do not attempt to bypass the fuse or use a fuse of a different rating.
- Do not attempt to repair the unit yourself, as removing covers may expose you to the risk of electric shock and other hazards. Let qualified specialists handle repairs.
- Repairs are necessary if the unit has been damaged in any way, for example, if the plug or cord is damaged, liquid or foreign objects have entered the unit, the unit has been exposed to rain or moisture, it does not operate normally, or it has been dropped.
- Do not remove safety features from the polarized plug or grounding plug. A polarized plug is one where one blade is wider than the other (for 110-volt power). A grounding plug has two blades and a third grounding prong. The wider blade and the third prong are for safety. If the supplied plug does not fit your outlet, consult an electrician about replacing the outlet.
- Do not use the unit in damp or wet conditions.
- Unplug the power cord from the outlet if you are not using the unit for an extended period.
- Do not step on the power cord and avoid kinks, especially near the plug and the unit's socket.
- When using the mains plug or the unit's power switch to turn off the unit, the unit's switch will remain in the ON position.
Control Panel
Front Panel
- INPUT 1: Unbalanced 1/4" jack for connecting all line-level audio sources (digital drum kit, keyboard, etc.).
- INPUT 2: Balanced 1/4" jack for connecting microphones with low input impedance.
- VOLUME 1: Volume control for devices connected to INPUT 1.
- VOLUME 2: Volume control for devices connected to INPUT 2.
- BASS/MIDDLE/TREBLE: Tone controls.
- AUX IN: 1/8" line input jack. You can connect a CD player, MP3 player, or mobile phone and play along with keyboards, drums, or digital pianos with backing tracks.
- POWER switch and indicator: Power switch. When the indicator is lit, the monitor is powered on.
Rear Panel
- Power Cable and Fuse: Connect your power source using the supplied cable. The monitor fuse is located in the holder. Use only the specified fuse.
- AUX OUT: 1/4" balanced output jack. You can connect the monitor to a mixer or other amplifier.
Connection Diagrams
Small Concert
The built-in dual input channel PA50 is ideal for small concerts. Using two PA50 monitors, you can connect a standard group of 4 performers.
- Connect the digital drum kit and bass guitar to the INPUT 1 of each PA50 monitor.
- Connect the microphone and keyboard to the INPUT 2 of each PA50 monitor.
- Adjust the volume and tone of each PA50 monitor.
Solo Performance
You can simultaneously connect a guitar and microphone to the PA50 for a solo performance.
- Connect the guitar to the INPUT 1 of the PA50 monitor.
- Connect the microphone to the INPUT 2 of the PA50 monitor.
- Adjust the volume and tone of the PA50 monitor.
Specifications
- Output Power: 50W (RMS)
- Frequency Range: 50-20kHz (-3dB)
- Power Supply: AC100~120V, AC220~240V (50/60Hz)
- Power Consumption: ≤88W
- Speakers: 6.5" Subwoofer, 1" Tweeter
- Input Impedance:
- Channel 1: 2.2MΩ
- Channel 2: 100kΩ
- AUX INPUT: 6.6kΩ
- Equalizer:
- Bass: ±10dB @ 80Hz
- Mid: ±10dB @ 1.8kHz
- Treble: ±10dB @ 15kHz
- Dimensions: Length: 361mm, Width: 364mm, Height: 325mm
- Weight: 11.5kg
- Accessories: User Manual.
Important Note for Buyers
This unit was manufactured in accordance with strict specifications and power requirements applicable in the country where it is intended for use. If you purchased this product via the internet, mail order, and/or telephone sales, you must ensure that this product is intended for use in your country of residence.
Warning
Using this product in any country other than the one for which it was intended may be dangerous and may void the manufacturer's or distributor's warranty.
Simple Usage Rules
- Do not use the device at high or negative temperatures, or in conditions of high humidity.
- Do not expose the device to direct sunlight.
- Do not attempt to disassemble the device yourself.
- Read the instruction manual carefully.
- Be sure to keep your sales receipt as proof of purchase, otherwise you may be denied warranty service by the manufacturer or distributor.