SEGERÖN Outdoor Table
By IKEA
Parts List
- 1x Allen Key (128632)
- 1x Wrench (110538)
- 1x Large Bracket/Plate (130445)
- 4x Bolts (10092125)
- 4x Washers (10092295)
- 4x Washers (106675)
- 4x Screws (10092385)
- 16x Clips/Fasteners (10092615)
- 1x Ring Component (10092372)
- 1x Ring Component (10092389)
- 1x Ring Component (10092367)
- 1x Ring Component (10092369)
- 8x Long Thin Rods
- 4x Short Frame Pieces
- 14x Slats (Tabletop Pieces)
- 2x Central Umbrella Hole Pieces
Assembly Steps
Step 1
Attach the four short frame pieces to the main frame structure using 16 clips (10092615). Ensure correct orientation as shown in the diagram [arrow pointing to clip insertion].
Step 2
Connect the main frame pieces using 4 bolts (10092125) and 4 washers (10092295). Tighten securely.
Step 3
Attach the four legs to the frame. Insert a bolt (10092125) with a washer (10092295) through the leg into the frame. Use the provided wrench (110538) to tighten. Repeat for all four legs.
Step 4
Insert 8 long thin rods into the designated slots on the frame. The diagram shows a specific orientation and the use of a tool to push them in.
Step 5
Attach the remaining frame components. The diagram shows attaching two pieces using bolts (10092125) and washers (10092295).
Step 6
Place the first set of 4 slats onto the frame. Secure them using the clips (10092615). The diagram indicates a 5mm gap between slats.
Step 7
Place the next set of 2 slats. Secure them with clips.
Step 8
Place the next set of 2 slats. Secure them with clips.
Step 9
Place the first of the 14 tabletop slats. The diagram shows it sliding into place.
Step 10
Secure the first tabletop slat using 2 clips (10092295). A 'click' sound indicates proper attachment.
Step 11
Secure the next set of 2 tabletop slats using 2 clips (10092295) each. A 'click' sound indicates proper attachment.
Step 12
Place the next set of 3 tabletop slats.
Step 13
Secure these 3 tabletop slats using 2 clips (10092295) each. A 'click' sound indicates proper attachment.
Step 14
Place the next set of 3 tabletop slats.
Step 15
Secure these 3 tabletop slats using 2 clips (10092295) each. A 'click' sound indicates proper attachment.
Step 16
Place the next set of 3 tabletop slats.
Step 17
Secure these 3 tabletop slats using 2 clips (10092295) each. A 'click' sound indicates proper attachment.
Step 18
Place the final set of 3 tabletop slats.
Step 19
Secure these 3 tabletop slats using 2 clips (10092295) each. A 'click' sound indicates proper attachment.
Step 20
Place the remaining tabletop slats.
Step 21
Secure the final tabletop slats using 2 clips (10092295) each. A 'click' sound indicates proper attachment.
Step 22
Place the central umbrella hole piece onto the tabletop. It slides into place.
Step 23
Important: To move the table, use two people ???. Do not drag the table ❌.
Step 24
Final check: Secure the tabletop pieces with the remaining clips (10092295). Ensure they click into place.
Step 25
Insert the umbrella holder assembly into the central hole. The diagram shows placing a washer (10092367), then the ring components (10092372, 10092389), and securing with a bolt (10092369).
