MAULstandard Mobile Whiteboard
Models: 645 85, 645 86
This document provides assembly instructions and usage guidance for the MAULstandard mobile folding whiteboard.
Parts List
- 1 x Whiteboard Panel
- 2 x Frame Component
- 2 x Frame Component
- 4 x Frame Component
- 8 x Screw (M6 x 40)
- 4 x Screw (M6 x 70)
- 2 x Wheel Assembly
- 2 x Wheel Assembly
- 6 x Connector Piece
- 8 x Screw (M5 x 10)
- 8 x Screw (M5 x 8)
- 4 x Hinge/Bracket
- 2 x Bracket/Mounting Plate
- 2 x Fastener/Clip
Assembly Steps Overview
The assembly process involves connecting various frame components and attaching the whiteboard panels to a wheeled base.
Diagram "A" & "B": Illustrates the attachment of frame components to the whiteboard panels using screws (items 5 and 6).
Diagram "C": Details the construction of the base structure, showing the connection of frame parts (items 3, 4) and connector pieces (item 9) to the wheel assemblies (items 7, 8) using screws (items 10, 11).
Diagram "D": Provides an overall view of the partially assembled unit, showing the frame connected to the base.
Diagram "E": Shows the method for attaching the whiteboard panels to the main frame using hinges/brackets (item 12) and fasteners (item 14).
Diagram "F": Highlights a specific connection point or detail of the assembled unit.
Usage Instructions
Magnet Usage: When using magnets on the whiteboard surface, always pull them off and reposition them rather than sliding them. This prevents damage to the surface.
(Note: The original document contains this tip in German, English, and French. The English version is presented here.)
General Information
The document also includes notes on packaging, disposal, and warranty information in multiple languages (German, English, French, Italian, Bulgarian). These sections provide guidance on product handling and manufacturer support.
