MAUL MAULstandard Jahresplaner Whiteboard
Model Numbers:
- 645 26
- 645 30
- 645 34
- 645 36
- 645 38
- 645 40
- 645 42
- 646 26
- 646 30
- 646 34
- 646 36
- 646 38
- 646 40
- 646 42
- 646 58
- 646 60
- 646 67
Product Information
This document provides assembly and usage instructions for the MAUL MAULstandard Jahresplaner (Yearly Planner) whiteboard.
Whiteboards MAULstandard
The MAULstandard series offers durable and functional whiteboards suitable for various planning needs.
Jahresplaner (Yearly Planner)
This specific model is designed as a yearly planner, ideal for tracking schedules, projects, and events over a full year.
Parts List
The following parts are included for assembly:
- Part 1: Whiteboard Panel (1x)
- Part 2: Mounting Bracket (1x)
- Part 3: Wall Plug (3x)
- Part 4: Screw Ø 4 x 30 mm (6x)
- Part 5: Screw Ø 6 x 30 mm (6x)
- Part 6: Mounting Rail (1x)
Assembly Instructions
WARNING: The enclosed assembly materials are intended exclusively for mounting on massive and solid walls (e.g., solid masonry, full brick, concrete, or solid wood walls) with a wall cladding of no more than 3 mm. For other or unknown wall types, consult a specialist. It is crucial to verify the suitability of the wall/ceiling construction and the mounting materials to withstand the forces involved. Improper assembly can endanger the user. Assembly must be performed by qualified personnel.
Magnet Usage Note
? Magnets should be lifted off the surface and placed in the new position, rather than slid across the surface. Sliding magnets can damage the whiteboard finish.
Mounting Steps:
- Prepare Wall: Identify the desired mounting location. Based on Diagram A, drill holes into the wall using a drill bit appropriate for the wall type and the provided wall plugs (Part 3). The diagrams suggest a depth of at least 70 mm (> 70 mm) and potentially drilling at an angle (approx. 30°). Insert the wall plugs (Part 3) into the drilled holes.
- Attach Mounting Hardware: Secure the mounting bracket (Part 2) or mounting rail (Part 6) to the wall using the screws (Part 4, Ø 4 x 30 mm). Ensure the hardware is firmly attached and level. Diagram B indicates mounting dimensions of approximately 24 mm and 25 mm, likely referring to the offset or bracket size.
- Mount Whiteboard: Carefully align the whiteboard panel (Part 1) with the mounted bracket or rail (Part 6). Slide or hook the whiteboard into place. Secure the whiteboard using the screws (Part 5, Ø 6 x 30 mm) as shown in Diagrams C, D, and E.
Ensure all connections are secure before use.
Important Safety and Usage Information
- Always lift magnets off the surface; do not slide them.
- Verify wall strength and suitability for mounting. Consult a professional if unsure.
- Use only the provided mounting hardware for appropriate wall types.
- Assembly should be performed by qualified individuals.
