Baby Trend Expedition 2-in-1 Stroller Wagon
Model: CW01XXX
Instruction Manual
Warranty Information
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within the first 180 days of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or with an altered or removed serial number, invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.
The Customer Service Department can be contacted at 1 (800) 328-7363, Monday through Friday, between 8:00 am and 4:30 pm (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Warranty is valid only in North America.
(Spanish and French warranty information is also provided in the original document but merged here for conciseness in the primary language.)
Parts List
Check that you have all the parts for this model before assembling the stroller.
- Canopy with Mosquito Net
- Soft Parent Organizer
- Child Tray
- Front Wheels
- Rear Axle and (2) Wheels
- Wagon Frame
Safety Warnings and Precautions
WARNING: Always follow all instructions to ensure your child's safety. Keep these instructions for future reference.
WARNING: Failure to follow these instructions could result in serious injury or death. Avoid serious injury from falling or sliding out; always use the safety harness and ensure children are properly positioned.
WARNING: Never leave children unattended.
WARNING: Care must be taken when folding and unfolding the stroller to prevent finger entrapment.
CAUTION: This stroller is designed for up to 2 children only. Using it with more than 2 children may cause an unbalanced condition that can injure your child. Children must be at least 6 months old and able to sit upright unassisted.
- Purses, shopping bags, parcels, diaper bags, or accessory items may change the stroller's balance and cause a hazardous, unstable condition.
- Ensure the stroller is completely opened and locked in place before allowing a child near it.
- Maximum weight in the child tray: 5 lbs (2.26 kg).
- Maximum weight in the soft parent organizer: 2 lbs (0.90 kg).
- Maximum weight capacity per child: 50 lbs (22.67 kg).
- Maximum total weight capacity (with accessories): 100 lbs (45.35 kg). Exceeding weight limits may cause excessive wear, stress, and hazardous instability.
- NEVER use the stroller on stairways or escalators.
- NEVER use the stroller with roller skates, in-line skates, skateboards, or bicycles.
- NEVER allow your stroller to be used as a toy.
- To clean, use only mild household soap or detergent and warm water on a sponge or clean cloth.
- Regularly check your stroller for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed.
- Discontinue use if the stroller malfunctions or becomes damaged.
Assembly Instructions
Adult assembly is required. Follow these instructions carefully for safe operation.
Frame Setup
To attach the wheels, unfold the stroller as described:
- Release the fold latch.
- Unfold the stroller frame by pulling the stroller handle upward until it clicks into the locked position. Ensure the RED indicator on the handle is not visible when the stroller is fully open. If the RED indicator is visible, check that the open position lock is engaged before continuing.
Front and Rear Wheel Installation
Front Wheels: Insert the front wheel axle pin into the wheel hub until the wheel locks firmly into place. Repeat on the other side. Pull on the wheel assembly to ensure it is securely attached.
Rear Axle and Wheels: Position the stroller with rear leg tubes facing upward. Place the rear axle with wheels over the rear legs and apply downward pressure on both sides. Ensure both sides lock into place. (Diagrams show the process of attaching wheels and ensuring they are locked.)
Soft Parent Organizer and Child Tray Installation
Soft Parent Organizer: Use the hook and loop fastener to hang the organizer onto the stroller handle. Fasten tightly.
Child Tray: Attach the child tray by aligning the corresponding slots on the stroller frame. Slide down into position until locked. Ensure the child tray is secure before use.
Canopy and Mosquito Net Installation
Canopy Installation: Add the canopy frame into the designated slots on the child tray.
Opening the Canopy: Use the strap and snap closure behind the main fold mechanism to anchor the canopy. Spread out both sides firmly.
Mosquito Net Installation: Unzip and pull out the net from the storage pocket. Stretch the net around the top edge of the frame. Repeat for the other side.
Storing the Mosquito Net: Lift the mosquito net at the elastic end and roll toward the canopy. Locate the zipper attached to the canopy end and connect it to the track. Tuck the canopy into the pocket while zipping it closed. Tuck and zip in sections.
Removing the Canopy: Press the tab on each end of the canopy and lift it up from the bottom end slots of the child tray.
Removing the Child Tray: Push the tabs outward and pull out the child tray. The canopy may also be installed without the child tray by inserting its ends into holes.
Handle Operation
To Use the Handle: Locate the handle underneath the frame and press the release button to unlatch. Pull the bar completely out of the frame and rotate it up to the desired position.
To Store the Handle: Reverse the previous step, pushing the handle completely in until it clicks into position. Ensure the handle rests on the storage hooks.
Folding and Unfolding
Folding the Stroller: Close the canopy. Engage the double lock feature by pushing the safety lock up, lifting the trigger, and pulling both triggers together. Push down on the stroller handle until it is completely folded. Ensure the fold latch clicks to secure it. For a compact fold, ensure the handle is pushed fully forward.
Unfolding the Stroller: Release the fold latch. Unfold the stroller frame by pulling the handle upward until it clicks into the locked position. Verify the open position lock is engaged.
Safety Harness Usage
WARNING: Avoid serious injury from falling or sliding out. Always use the safety harness.
STRANGULATION HAZARD: Children can strangle in loose straps. Never leave a child in the seat when straps are loose or undone.
The child tray is not designed to hold the child. Stay near and watch the child during use. NEVER leave the child unattended.
- Place the crotch strap between your child's legs. Insert the Harness Buckles into the Center Clasp.
- Adjust waist straps for comfort and safety by sliding buckles. Safety straps should fit snugly around your child.
To Release Safety Belt: Push the button on the Center Clasp; the two Harness Buckles will pop free.
Brake Operation
WARNING: Always set brakes when the stroller is not being pushed to prevent it from rolling away. NEVER leave the stroller unattended on a hill or incline.
To Engage Brakes: Apply light downward pressure to the brake lever located on each rear wheel. You may need to move the stroller slightly forward or backward to align the brake teeth with the wheel brake cluster. Check that the stroller will not move and that both brakes are properly applied.
To Release Brakes: Gently lift up on the brake lever.
Maintenance and Care
Wagon Fabric Care
To Detach Fabric (for cleaning or replacement): Unzip from the front and rear of the wagon frame. Remove D-Rings straps from the fabric near the bottom frames to unthread harness straps. Remove screws on the underside of the frame.
To Reattach Fabric: Ensure the fabric is realigned to the corresponding frames. Insert D-Ring straps through slots and secure them. Ensure zippers are zipped and hook and loop fasteners are attached.
NOTE: Regularly check for worn parts, torn material, or stitching. Replace or repair parts as needed.
Rear Axle Wheel Removal
To Release Rear Wheel Assembly: Push in the rear wheel release. The wheel detaches from the bushing.
To Replace Rear Axle: Press the pin on each side behind the wheel hub and pull the rear axle out.
General Cleaning and Care
Cleaning Seat Pad: Spot clean only. Surface wash small spots with a mild solution of soap and water. Rinse with water and wipe or air dry.
Cleaning Stroller: Surface wash the stroller frame, plastic parts, and fabric with a mild solution of soap and water. Wipe surfaces with water to remove soap solution. Wipe or air dry.
Regular Checks: Check your stroller for loose screws, worn parts, torn material, or stitching on a regular basis. Replace or repair parts as needed.
