Expedition 2-in-1 Stroller Wagon Plus

Product Information

Company: Baby Trend, Inc.

Address: 13048 Valley Blvd. Fontana CA 92335

Imported by: Amazon Services Europe, 38 avenue J.F. Kennedy, L-1855 Luxembourg

Model Numbers: WG01XXXA_2L_102523, WG01XXXEU/UK

Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.

Important Safety Information

IMPORTANT!

IMPORTANT!

IMPORTANT!

⚠️ WARNING: Ensure that all locking devices are engaged before use.

⚠️ WARNING: Never leave children unattended.

⚠️ WARNING: To avoid injury, ensure that the child is not near the product when unfolding and folding this product.

⚠️ WARNING: Do not let child play with this product.

⚠️ WARNING: Care must be taken when unfolding the stroller to prevent finger entrapment.

❗ CAUTION: Do not allow children near stroller while unfolding.

⚠️ WARNING: Care must be taken when folding and unfolding the stroller to prevent finger entrapment.

❗ CAUTION: NEVER run or jog with this stroller. This stroller is designed for up to 2 children only. Use with more than 2 children may cause an unbalanced condition which can injure/harm your child. Children must be at least 6 month old and be able to sit upright unassisted.

Purses, shopping bags, parcels, diaper bags or accessory items may change the balance of the stroller and cause a hazardous, unstable condition.

Be certain the stroller is completely opened and locked in place before allowing a child near the stroller.

The maximum weight that can be carried in the child tray is 5 lbs (2.26 kg).

The maximum weight that can be carried in the soft parent organizer is 2 lbs (0.90 kg).

The maximum weight capacity is 22kg (48.5 lbs) for the front seat and 22kg (48.5 lbs) for the rear seat. The maximum weight capacity of the stroller in combination with any accessories is a total of 44 kg (97 lbs). Exceeding the weight limit will cause excessive wear and stress on the stroller and may cause a hazardous unstable condition to exist.

NEVER use the stroller on stairways or escalators.

NEVER use the stroller with roller skates, in-line skates, skateboards or bicycles.

NEVER allow your stroller to be used as a toy.

To clean use only mild household soap or detergent and warm water on a sponge or clean cloth.

Check your stroller for loose screws, worn parts, torn material or stitching on a regular basis. Replace or repair parts as needed.

Discontinue use of stroller should it malfunction or become damaged.

⚠️ WARNING: Any load attached to the handle bar or on the backrest or on the sides of the stroller will affect the stability of the stroller.

⚠️ WARNING: Any accessories which are not approved by the manufacturer shall not be used.

Parts List

Check that you have all the parts for this model before assembling the stroller.

• Double Canopy Diagram shows a folded canopy.
• Soft Parent Organizer Diagram shows a fabric organizer with pockets.
• Child Tray Diagram shows a removable tray.
• Front Wheels Diagram shows two front wheels.
• Rear Axle and (2) Wheels Diagram shows an axle with two wheels attached.
• Wagon Frame Diagram shows the main frame of the wagon.

Notes on parts usage:

• No additional mattress shall be added.
• Always engage parking device when placing and removing the children from the product.
• The stroller does not replace a cot or bed. Do not allow child to sleep inside this product.
• Only replacement parts supplied or recommended by the manufacturer/distributor shall be used.
• Always keep this product away from fire, open flame or high heat source.

Assembly Instructions

Frame Setup

To attach the wheels, unfold stroller as described in the following section:

1. Release the fold latch. Diagram (Fig. 1a) shows releasing a fold latch.
2. Unfold the stroller frame by pulling the stroller handle upward until it clicks into locked position. Diagram (Fig. 1b) shows unfolding the frame.
3. The RED indicator on the handle will not be visible when stroller is fully open. If RED indicator is visible, check open position lock is engaged before continuing. Diagram (Fig. 1c) shows the handle with a red indicator, illustrating the check for the open position lock engagement.

Front Wheels

2. Insert front wheel axle pin into the wheel hub until the wheel locks firmly into place. Repeat on other side. Diagram (Fig. 2a) shows inserting a front wheel axle pin into the wheel hub.

NOTE: Pull on the wheel assembly to ensure that it is securely attached to the stroller.

Rear Axle-Wheels

Attach the rear axle assembly and wheels as follows:

3. Position stroller with rear leg tubes facing upward. Place the rear axle with wheels over the rear legs and apply downward pressure on both sides. Ensure both sides lock into place. Diagram (Fig. 3) shows attaching the rear axle with wheels to the stroller's rear leg tubes, with an indication to push each rear wheel into position.

NOTE: NEVER use stroller if wheels do not lock into place. If you need assistance, please contact our customer service department at customerservice@babytrend.com.

Soft Parent Organizer

⚠️ WARNING: Do not place hot liquids or more than 2 lb. (0.90kg) pounds in the parent tray. Serious burns or unstable conditions can result.

4. Strap In The Soft Parent Organizer: Use the hook and loop to hang the soft parent organizer onto the stroller handle. Follow illustrations 1-3. Be sure to fasten tightly. Diagram (Fig. 4a) shows the soft parent organizer being attached to the stroller handle using hook and loop fasteners.

Child Tray

⚠️ WARNING: Do not place hot liquids or more than 5 pounds in the child tray. Serious burns or unstable conditions could result.

5. Attach child tray by lining up the corresponding slots located on stroller frame. Slide down into position until locked into place. Diagram (Fig. 5a) shows the child tray being attached to the stroller frame by aligning slots and sliding it down until it locks.

NOTE: Check to make sure the child tray is secure before using.

Canopy

6. To install the canopy: Add the canopy frame into the designated slots located on the child tray. Diagram (Fig. 6a) shows inserting the canopy frame into tray slots.
7. To open the canopy: Behind the main fold mechanism use the strap and snap closure to anchor the canopy. Firmly spread out both sides of the canopy. Diagram (Fig. 6b) illustrates opening the canopy by using a strap and snap closure to anchor it, then spreading the sides.
8. To secure canopy: Fasten the canopy to the front and back circle tabs. Then, stitch each hook and loop to the wagon. Diagram (Fig. 6c) shows securing the canopy by fastening it to front and back circle tabs and attaching hook and loop fasteners.
9. To loosen canopy: Unhook the canopy from both front and back circle tabs. Then, detach all hook and loops from the canopy. Diagram (Fig. 6d) illustrates loosening the canopy by unhooking it from tabs and detaching hook and loop fasteners.
10. To remove the canopy: Press the tab on each end of the canopy, and lift up the entire canopy from the bottom ends slots of the child tray. Diagram (Fig. 6e) shows removing the canopy by pressing tabs on each end and lifting it from the bottom slots.
11. To remove the child tray: push the tabs outward and pull out the child tray. Diagram (Fig. 6f) shows removing the child tray by pushing tabs outward and pulling it out.

NOTE: The canopy may also be installed without the child tray. Insert the ends into holes.

Pull Handle Storage

7. TO USE THE HANDLE: Locate the handle underneath the frame and press the release button to unlatch. Pull the bar completely out of the frame. Diagram (Fig. 7a) shows releasing the handle and pulling it out of the frame. Rotate up to desired position. Diagram (Fig. 7b) shows rotating the handle to the desired position.
8. TO PUT IT AWAY: Reverse step (Fig. 7a) ensure to push the handle completely in until it clicks into position. Ensure the handle is resting on the storage hooks. Diagram (Fig. 7c) shows the handle pushed in and resting on storage hooks.

To Fold Stroller

⚠️ WARNING: Care must be taken when folding the stroller to prevent finger entrapment.

❗ CAUTION: Do not allow children near stroller while folding.

8. Close the canopy by reversing (Fig. 6b).
9. To use the double lock feature: (1) push the safety lock up. (2) Lift up the trigger to hold the safety lock into place. (3) Pull both triggers together. Diagram (Fig. 8a) illustrates the double lock feature: pushing a safety lock up, lifting a trigger, and pulling both triggers.
10. Push down on the stroller handle until the stroller is completely folded. Ensure the fold latch clicks and secures the stroller closed. Diagram (Fig. 8b) shows pushing down on the stroller handle to fold it completely and ensure the fold latch clicks.

To Unfold Stroller

9. Release the fold latch. Diagram (Fig. 9a) shows releasing the fold latch. Unfold the stroller frame by pulling the stroller handle upward until it clicks into locked position. Diagram (Fig. 9b) shows unfolding the stroller frame by pulling the handle upward until it clicks.

The RED indicator on the handle will not be visible when stroller is fully open. If RED indicator are visible check open position lock is engaged before continuing.

Safety

To Use the Safety Harness

⚠️ WARNING: Avoid serious injury from falling or sliding out. Always use the safety harness.

⚠️ STRANGULATION HAZARD: Child can strangle in loose straps. Never leave child in seat when straps are loose or undone.

10. The child tray is not designed to hold the child in the stroller. Stay near and watch child during use. NEVER leave child unattended.
11. Place the crotch strap between your child's legs. Insert the Harness Buckles into the Center Clasp with the Button.
12. Adjust waist straps for your child's comfort and safety by sliding buckles in either direction. Safety straps are to fit snug around your child. Diagram (Fig. 10) shows the harness buckles being inserted into the center clasp and waist straps being adjusted for a snug fit.

To Release Safety Belt

11. Push Button on Center Clasp, the four Harness Buckles will pop free. Diagram (Fig. 11) shows pushing the button on the center clasp to release the harness buckles.

Brakes

⚠️ WARNING: Always set brakes when the stroller is not being pushed so that the stroller will not roll away. NEVER leave stroller unattended on a hill or incline as the stroller may slide down the hill.

12. To engage brakes, apply light downward pressure to the brake lever located on each rear wheel. The stroller may require slight forward or rearward movement in order to line up the teeth on the brake with each wheel brake cluster. Diagram (Fig. 12) shows engaging the brake lever on the rear wheel by applying downward pressure.

NOTE: Check that the stroller will not move and that both brakes are properly applied.

To release, gently lift up on the brake lever.

Assembly (Continued)

Basket

16. To install: Attach the basket from the outside frame of the wagon. Ensure both latches are straight, facing the frame. Insert by pushing in and sliding down the latches until it locks. Diagram (Fig. 16a) shows attaching the basket to the wagon frame, ensuring latches are straight and pushing/sliding them to lock.

⭐ IMPORTANT: DO NOT put child in the basket.

16. To flip basket into the wagon: From the bottom of the basket, push it upward and over into the wagon, until the basket is entirely inside. Push down into basket to ensure its secure. Diagrams (Fig. 16b, Fig. 16c) show pushing the basket upward and over into the wagon and then pushing down to secure it.

To Remove Basket

17. To detach: Flip the basket over the wagon frame. Pull the latch levers forward and lift up, until the basket comes off completely. Diagram (Fig. 17) shows removing the basket by flipping it over the frame, pulling latch levers forward, and lifting.

Seat 2 Mat

18. Option 1 Mat(s): Lay flat in stroller. Diagram (Fig. 18a) shows laying a mat flat in the stroller. ⭐ IMPORTANT: Only use the harness in the lowest position, and place mat(s) with round edge towards the back seating position as shown in. Diagram (Fig. 18b) shows placing a mat with the round edge towards the back seating position.
19. Option 2 Seat(s): To use as seat(s) thread the crotch buckle through the folded or unfolded mat(s). ⭐ IMPORTANT: Only use the lowest position for the unfolded mat and the highest position for folded mat. Always buckle the harness to use as a stroller. Refer to step 10 for harness instructions. Diagrams (Fig. 18c, Fig. 18d) show the mat and harness interaction, illustrating threading the crotch buckle through a mat for seat use, showing lowest/highest positions.

Wagon Fabric

19. To detach the fabric: for cleaning or replacement, unzip from the front and rear of the wagon frame. Diagram (Fig. 19a) shows unzipping the wagon frame fabric from the front and rear.
20. Through the pocket opening, remove the D-Rings straps from the fabric near the bottom front and rear frames to unthread the harness straps. Remove the screws on the underside of the frame. Diagrams (Fig. 19b, Fig. 19c) show removing D-rings straps from the fabric through a pocket opening and removing screws on the underside of the frame.
21. To reattach the fabric: ensure that the fabric is realigned to the corresponding front and rear end frames.

Rear Axle Wheel Removal

Attach the rear axle assembly and wheels as follows:

20. To release the entire rear wheel assembly, push in the rear wheel release. The wheel easily detaches from the bushing. Diagram (Fig. 20a) shows pushing the rear wheel release to detach the wheel assembly.
21. If replacing the rear axle, press the pin on each side behind the wheel hub. Pull the rear axle out from the hub. Diagram (Fig. 20b) shows pressing pins on the sides of the wheel hub to pull the rear axle out.

NOTE: NEVER use stroller if wheels do not lock into place. If you need assistance, please contact our customer service department at customerservice@babytrend.com.

Care and Maintenance

• Cleaning Seat Pad: Spot clean only - Surface wash small spots with mild solution of soap and water. Rinse with water to remove soap solution. Wipe or air dry.
• Cleaning Stroller: Surface wash stroller frame, plastic parts and fabric with mild solution of soap and water. Wipe surfaces with water to remove soap solution. Wipe or air dry.
• Check your stroller for loose screws, worn parts, torn material or stitching on a regular basis. Replace or repair parts as needed.
• SEAT 2 MAT WASHING INSTRUCTIONS: Remove the foam and wash the cover separately. Do not wash it with other fabrics. Machine wash on gentle / delicate cycle with cold water. Do not bleach. Do not tumble dry. Hang dry. Do not iron. Do not dry clean.

Baby Trend® Customer Service

The Customer Service Department can be contacted at customerservice@babytrend.com. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.