USER MANUAL

1. Security information

• Read the manual before first use.
• Do not use the wheelchair until fully assembled.
• Use of the wheelchair by people who are unable to operate it independently is not recommended.
• Maximum load capacity must not exceed 120 kg.
• The wheelchair can only be used by one person at a time.
• It is recommended to keep your feet on the footrest and your forearms on the armrests when driving.
• Always check the battery level on the control panel before use.
• This electric wheelchair should only be used on a flat surface or at low elevations. It should not be ridden on a surface inclined at an angle of more than 8°.
• Do not drive the wheelchair at maximum speed when going uphill or downhill.
• Do not use the wheelchair on soft and slippery surfaces such as mud, sand etc.
• Do not ride the wheelchair sideways on highly elevated areas.
• Do not put any additional load such as a trailer etc. on the wheelchair.
• Do not repair or modify the construction of the wheelchair by yourself. Use only original spare parts provided by the manufacturer.
• Do not stand up or sit down on the wheelchair when the control module is switched on.
• Do not use the wheelchair without anti-tip wheels.
• When the freewheel (manual) mode is on, do not get on or off the wheelchair without assistance.
• Do not lean forward to grab items laying in front, on the side or behind the wheelchair. Do not stand on the footrest. It might result in the wheelchair falling over.
• Avoid rapid changes of the direction while driving on elevations.
• Always slow down while driving downhill or making turns.
• Before use check if the wheels are correctly mounted.
• Do not make sudden moves while using the joystick.
• When storing, protect the wheelchair from rain and adverse weather conditions.
• Before turning on the wheelchair, make sure that the levers are set to electric mode.
• Avoid areas with horizontal gaps.
• If the wheelchair is not going to be used for a long period of time, remove the battery.
• Do not use the wheelchair on the road. It might result in a car accident.
• Do not store the wheelchair in places with high temperatures and humidity.

2. Product description and application

Electric wheelchair is designed for people who have problems with mobility, helping disabled patients with their everyday tasks. It can replace a standard wheelchair.

Electric wheelchair is suitable for patients with:

• Disability, who have problems with unassisted movement,
• Dysfunctions and reduced movement,
• Heart and cardiovascular system diseases,
• Weakening body due to advanced age.

A. ELEMENTS OF THE WHEELCHAIR

• 1. Handle
• 2. Backrest
• 3. Seat
• 4. Armrest
• 5. Control module
• 6. Support wheel for transportation
• 7. Rear wheel 12"
• 8. Front wheel 8"
• 9. Footrest
• 10. Bag
• 11. Security buckle
• 12. Mounting screw
• 13. Folding button
• 14. Lithium battery
• 15. Engine (mode) levers

B. PRODUCT CHARACTERISTICS

• Aluminium, folding frame
• Solid rear 12" and front 8" wheels
• Control module: on/off button, steering joystick, horn button, speed adjustment, battery level indicator, mute button
• Safe and reliable electromagnetic brake
• Fully closed, maintenance-free battery
• Security belt and anti-tip wheels
• Pocket for small goods located at the back
• Two modes of operation: electric and manual
• Strap - for securing a folded wheelchair

C. TECHNICAL PARAMETERS

1. Product type: for indoor and outdoor use
2. Maximum speed: ≤ 6 km/h
3. Maximum capacity: 120 kg
4. Braking distance on horizontal surface: ≤0.8 m
5. Max. range: 20-25 km
6. Battery: lithium, 24V x 12Ah
7. Max. angle of elevation: ≤ 8°
8. Max. turning radius: 1.20 m
9. Wheelchair weight: 19.10 kg
10. Battery weight: 3.30 kg

Note! Some parameters might vary depending on user weight, road conditions and battery usage.

• Safety Classification: type B
• Ingress protection level for engine: IP44
• Engine power level: 2x150W
• Wheelchair cannot be used in areas with flammable gas mixed with air, oxygen or nitrous oxide.

3. Icon description

4. Assembly and adjustment

• Unfolding: Take the wheelchair out of the box. Unfold it, till you hear a "click" sound. Connect the power cable to the battery.
• Folding: To fold the wheelchair, unlock the clamp located at the back, grab the handle and push it down. For extra security, to prevent the wheelchair from unfolding, use the strap included. Note! Disconnect the power cable from the battery before unfolding.
• Control module position: Adjustment should be done while seated. Loosen the mounting screw and adjust the position of the panel. Tighten the screw.
• Armrest tilting: Press the buttons located on the outside of the wheelchair to lift the armrests. To lower the armrest, pull them down until you hear a "click" sound.
• Anti-tip wheels assembly: Put the wheels into the mounting openings located at the back of wheelchair. Secure them with dedicated screws and tighten using allen wrench and pliers.
• Removing the battery: to remove the battery, unlock the buckle located underneath and slowly pull the battery out.

5. Operation

A. CONTROL MODULE FUNCTIONS

• Joystick (A): used to control the speed and direction. The further the joystick is pushed away from the middle, the faster the wheelchair will move. It will lose speed automatically after the joystick is released.
• Turn on/off button (B)
• Speed indicator has 5 levels (C): 1 - slowest, 5 - fastest.
• Horn button (D): press to use the horn.
• Speed adjustment buttons (E): use +/- to increase or decrease the speed
• Battery level indicator (F)
• Mute button (G)
• USB port and module with flashlight (H)

LED Display Status

B. MANUAL AND ELECTRIC MODE SWITCHING

To use the wheelchair in manual mode, move down the left and right engine levers located at the back. To use it in electric mode, move the levers up.

C. CHARGER

• Set includes a charger dedicated to the battery.
• Battery charging time is around 6 hours.
• Plug the charger into the charging port located in the control module or on the battery:

• Connect the charger to power supply.
• Check the connection.

To avoid the risk of fire, do not modify or disconnect the charging circuit while charging the battery.

D. DIRECTIONS FOR USE

• Select the desired driving mode. Note! Do not switch ride mode while driving on elevation.
• Push the power button to check the proper functioning of brakes. Brakes are working correctly (electric mode) if you cannot push the wheelchair. Otherwise, contact the Seller.
• Tilt the footrest and sit comfortably on the seat. Lower the footrest back to horizontal position. Note! Do not use the footrest as a support when sitting down or standing up from the wheelchair. This may cause the wheelchair to tilt and fall.
• Sit on the wheelchair and turn the control panel on. The lights will light up. Joystick should be in neutral position.
• Take caution when using for the first time. Control the speed and direction carefully. The electromagnetic brake will get released only after pushing the joystick (electric mode). To speed up, push the joystick further away from its neutral position. To slow down – do the opposite.
• To stop the wheelchair, release the joystick. Pressing the power button will also stop the wheelchair.
• Using dedicated buttons on the control panel, adjust the wheelchair's speed according to user's physical state and road conditions.
• Wheelchair should only be used on flat surfaces. Driving on muddy or uneven surfaces can cause control system damage.

6. Technical data

7. Cleaning and maintenance

• It is recommended to regularly inspect the construction and its elements (wheels, frames, cables, control module, brakes etc.).
• Any used or damaged wheelchair parts need to be replaced (in such case, please contact the Seller).

8. Battery maintenance and cleaning:

1. Regularly check the battery level displayed. If the level is very low, charge it immediately to avoid a voltage drop (which may affect battery life).
2. If wheelchair won't be used for longer period of time, charge battery at least once a month.
3. Battery has a certain lifespan. Exchange your battery if it wears out.
4. Battery should be kept clean and away from kids. Avoid causing any shock or damage to the battery.
5. Charge it regularly to expand its lifespan.
6. Used batteries should be utilized according to local environmental regulations.

9. Storage and transport conditions

A. TRANSPORTATION

• Take caution during transportation. Do not throw, turn over or put pressure on the product and its packaging.
• For wheelchair folding, check "Assembly and adjustment".

B. STORAGE

Wheelchair should be kept in dry and well-ventilated space. Avoid: high temperature and its rapid changes, acids, alkalis and corrosive chemicals.

C. STORING CONDITIONS

Temperature: -25°C ~+55°C

Humidity: 30-75%

10. Troubleshooting

In the event of a malfunction, the control module will indicate it with a beep and a flashing diode. The number of beeps and LED flashes will help to identify the problem.

11. Warranty information

• All products distributed by the company are covered by a warranty, the terms of which are described in the warranty card available on the website. Please contact the retailer from whom you purchased the product. Please, keep in mind that for warranty purposes, the proof of purchase (receipt or invoice) should be retained. As a user-friendly company, only tested products are provided – in terms of material, quality and functionality. If you have any questions regarding service procedures, please contact us.
• Warranty does not cover:
• Wearable parts: upholstery, tires, armrests, battery
• Damages resulting from: self-repairs, changes in product construction, dropping, transportation, inappropriate usage, failure to follow instructions, natural disasters (fire, earthquake, flood)