4SCU13LE 13 SEER SPLIT SYSTEM AIR CONDITIONER

FORM NO. 4SCU13LE-100 (09/2019)

COMPONENTS

Filter drier shipped loose for installation flexibility
Service valves positioned for quick installation with 45 degree gauge ports
Indoor coil orifice shipped with outdoor unit for correct match
Charged for 15 ft. of line set
Factory installed high and low pressure switches
Sealed contactor with lugs

DESIGN

Designed for ambients up to 125°F

ACCESSORIES

Low ambient control
Thermal expansion valve kits
Crankcase heater
Hard start kit
Sound blanket
Loss of charge kit
Time delay
Short cycle protection
Freezestat kit

COMPRESSOR

High-efficiency scroll compressor
R410a refrigerant
Grommet-mounted compressor for quiet operation
Internally protected against high temperature motor overload conditions
Heavy-duty compressor sound blanket for quiet operation (optional accessory)

CABINET

Full metal louvered panel with 2 screws to remove for ease of coil cleaning and service
Corner-mounted controls for easy service
Rounded corners for safety and attractive, clean appearance
Baked polyester paint finished over galvanized steel for maximum durability
Removable PVC-coated wire fan discharge grill
External gauge ports for easy service

COILS

Enhanced aluminum fins and copper tubing for high efficiency and capacity
Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow

WARRANTY

10 year limited warranty on compressor, 10 year limited warranty on all parts, extended warranty available*

*Warranty provides for a total of 10 years of limited warranty coverage (Standard 5-year limited parts warranty plus an additional 5-year limited extended parts warranty). Warranty must be registered online within 60 days of installation to qualify for 10-year coverage. Unregistered equipment defaults to 5-year coverage. See full warranty at www.alliedair.com for terms, conditions and exclusions.

NOTE

For the latest ratings, please see www.alliedratings.com or www.AHRIdirectory.org

Intertek ETL Listed LogoAHRI Certified LogoAHRI Certified Logo

MODEL NUMBER GUIDE

4 SCU 13 LE 1 24 P - 5 A

REFRIGERANT: 4 = R410A
SCU: SPLIT AIR CONDITIONER
SEER: 13
TIER: LE = LOUVERED ENHANCED
MINOR REVISION CODE
MAJOR REVISION CODE
ELECTRICAL: P - 208-230V/60HZ/1PH
TONNAGE: 18, 24, 30, 36, 42, 48, 60
REGION RESTRICTION: 1 = ALL REGIONS

PHYSICAL AND ELECTRICAL DATA

Model	Voltage/Hz/ Phase	Voltage Range	Min. Circuit Amp.	Max. Over Current Device (amps)	Compressor		Fan Motor
					Rated Load (amps)	Locked Rotor (amps)	Rated Load (amps)	Rated HP	Nom. RPM
4SCU13LE118P-5	208-230/60/1	197-253	10.9	15	8.1	39	0.7	1/10	1010
4SCU13LE124P-5	208-230/60/1	197-253	14.1	20	10.7	53	0.7	1/10	1010
4SCU13LE130P-5	208-230/60/1	197-253	15.6	25	11.6	59	1.1	1/5	1090
4SCU13LE136P-5	208-230/60/1	197-253	20.1	35	15.2	70	1.1	1/5	1090
4SCU13LE142P-5	208-230/60/1	197-253	28.1	45	21.1	90	1.7	1/4	825
4SCU13LE148P-5	208-230/60/1	197-253	31.9	50	24.1	100	1.7	1/4	825
4SCU13LE160P-5	208-230/60/1	197-253	29.4	50	22.1	125	1.7	1/4	830

UNIT DIMENSIONS (IN.)

Model No.	Dimensions A - width	Dimensions B - depth	Dimensions C - Height	Shipping Weight (lbs.)
4SCU13LE118P-5	24.75	26.75	25.75	140
4SCU13LE124P-5	24.75	26.75	25.75	137
4SCU13LE130P-5	24.75	26.75	29.75	149
4SCU13LE136P-5	24.75	26.75	29.75	157
4SCU13LE142P-5	29.38	31.25	29.75	201
4SCU13LE148P-5	29.38	31.25	33.75	204
4SCU13LE160P-5	29.38	31.25	29.75	231

Note: Weights listed are unit weights with packaging. Dimensions listed are unit sizes w/o packaging.

Diagram of an outdoor air conditioning unit with dimensions labeled A, B, and C

SOUND RATINGS

Model	Sound Power¹	Estimated Sound Pressure (dBA)²
		3.3 Feet (1 Meter)	6.6 Feet (2 Meters)	9.8 Feet (3 Meters)
4SCU13LE118P-5	72	64	58	54
4SCU13LE124P-5	72	64	58	54
4SCU13LE130P-5	74	66	60	56
4SCU13LE136P-5	74	66	60	56
4SCU13LE142P-5	76	68	62	58
4SCU13LE148P-5	77	69	63	59
4SCU13LE160P-5	78	70	64	60

¹ Rated in accordance with AHRI standard 270 (2015). AHRI Standard 270 establishes a method of rating outdoor unitary equipment in terms of Sound Power.

² Rated in accordance with AHRI standard 275 (2010). AHRI Standard 275 provides the calculations for estimating the A-Weighted Sound Pressure at a given distance from the equipment. That is a more useful number because that is what humans will hear.

³ Based only on distance factor; other factors may change this value such as: Unit location (reflective surfaces adjacent to the unit), Barrier shielding sources, Sound path/elevation, Outside noise sources

ACCESSORIES

System Accessory	Where Used	Kit Number	Purpose
Liquid Line solenoid	All models	60M52	Prevents liquid migration to the compressor especially for high liquid riser applications
Low ambient (cooling operation)	All models	34M72	Enables cooling demand down to 30 °F. Will require freeze stat, CC heater and TXV
Compressor Short Cycle protector	All models	47J27	Delays compressor start 5-7 minutes to prevent short cycling
Hard Start	18	10J42	Scroll compressors usually do not require hard start; maybe needed for utility brown-out or low voltage areas
Hard Start	24 thru 60	88M91
Crankcase Heater	18, 24, 30, 36	93M04	Prevents liquid migration to compressor in cold weather
Crankcase Heater	42, 48, 60	93M05
Sound Cover	Factory Installed		Lowers compressor sound level
Loss of Charge Kit	Factory Installed		Protects the compressor if refrigerant charge is too low
Additional System Accessories (indoor section)
TXV Kit	18, 24, 30 36, 42, 48 60	H4TXV01 H4TXV02 H4TXV03	TXVs provide superior refrigerant flow control, comfort and efficiency compared to pistons
Outdoor Thermostat - electric heat	All models	10Z23	Prevents electric heat operation above specific ambient conditions
Outdoor Thermostat - Mounting box	All models	31461	Mounting box for outdoor thermostat
Freeze stat	All models	93G35	Protects the compressor at low suction pressure conditions
Over flow switch	All models	11U75	Turn the system off, if condensate water overflows due to clogged drain pipes
Blower time delay	All models	58M81	Improves system efficiency and comfort
Single point power supply	All models	21H39	Provide single power source in one junction box
Auxiliary blower relay	All models	85W66	Maybe required to select multiple indoor blower speeds

REFRIGERATION DATA

Outdoor Model	Charge (oz) ⁵	Refrigerant Connection	Outdoor (DTC) ⁶			Refrigerant Line Size			Indoor Expansion Device
		Suction	Liquid	Suction	Liquid	Suction	Liquid	Piston	TXV¹
4SCU13LE118P-5	62	5/8	3/8	3/4	3/8	5/8 or 3/4 ³	3/8 or 1/4 ²	0.053	H4TXV01
4SCU13LE124P-5	70	5/8	3/8	3/4	3/8	5/8 or 3/4 ³	3/8 or 1/4 ²	0.057	H4TXV01
4SCU13LE130P-5	82	3/4	3/8	3/4	3/8	3/4	3/8	0.063	H4TXV01
4SCU13LE136P-5	84	3/4	3/8	7/8	3/8	3/4	3/8	0.072	H4TXV02
4SCU13LE142P-5	104	3/4	3/8	7/8	3/8	3/4	3/8	0.074	H4TXV02
4SCU13LE148P-5	1	7/8	3/8	7/8	3/8	7/8	3/8	0.082	H4TXV02
4SCU13LE160P-5	144	7/8	3/8	7/8	3/8	7/8 or 11/8 ⁴	3/8	0.090	H4TXV02

¹ Required to achieve AHRI rating. If NA (Not Applicable) is in the piston column, then TXV is required.

² Use 3/8 if over 24 feet of line set

³ Use 3/4 if over 24 feet of line set

⁴ Use 1 1/8 if over 24 feet of line set. Adapter provided with OD unit

⁵ Charged for 15 ft of line set

⁶ DTC = Designated Tested Combination

COOLING PERFORMANCE WITH DTC¹

Outdoor Model	Indoor Model	Capacity (BTUH)	EER	SEER
4SCU13LE118P-5	E*1P24(A,B)+TDR	17600	11	13
4SCU13LE124P-5	E*1P24(A,B)+TDR	22800	11	13
4SCU13LE130P-5	E*1P24(A,B)+TDR	28000	10.5	13
4SCU13LE136P-5	E*1P36(B,C)+TDR	34000	10.5	13
4SCU13LE142P-5	E*1P43C+TDR	40000	10.5	13
4SCU13LE148P-5	E*1P49C+TDR	47000	11	13
4SCU13LE160P-5	E*1P49C+TDR	57000	10.5	13

¹ DTC = Designated Tested Combination

NOTE: For the latest ratings, please see www.alliedratings.com or www.AHRIdirectory.org

COOLING PERFORMANCE EXTENDED RATINGS

Outdoor Model	Indoor Model	Indoor Temp DB/ WB °F	65°		82°		95°		105°		115°
			Btuh S/T	kW	Btuh S/T	kW	Btuh S/T	kW	Btuh S/T	kW	Btuh S/T	kW
4SCU13LE118P-5	E*1P24	85/72	23,500	0.63	21,200	0.65	20,700	0.68	18,500	0.70	18,000	0.73
		80/67	21,600	0.68	20,600	0.70	19,000	0.73	18,000	0.78	16,600	0.81
		75/63	20,200	0.74	18,500	0.76	17,000	0.80	15,100	0.83	14,200	0.88
		75/57	18,200	1.00	16,300	1.00	15,700	1.00	14,300	1.00	13,400	1.00
4SCU13LE124P-5	E*1P24	85/72	29,500	0.63	27,400	0.65	25,900	0.68	23,500	0.72	22,400	0.73
		80/67	27,200	0.70	25,300	0.72	23,600	0.76	20,500	0.79	19,600	0.83
		75/63	25,500	0.73	24,100	0.75	21,200	0.80	19,600	0.81	17,600	0.87
		75/57	22,800	1.00	21,600	1.00	19,200	1.00	18,400	1.00	16,600	1.00
4SCU13LE130P-5	E*1P24	85/72	35,100	0.62	33,100	0.65	31,000	0.67	28,400	0.69	26,800	0.72
		80/67	33,000	0.68	31,500	0.69	29,500	0.75	26,500	0.79	23,800	0.82
		75/63	31,000	0.71	29,100	0.73	26,200	0.77	24,300	0.82	21,900	0.84
		75/57	29,500	1.00	26,400	1.00	24,000	1.00	22,100	1.00	19,600	1.00
4SCU13LE136P-5	E*1P36	85/72	42,100	0.61	39,890	0.64	38,200	0.67	35,650	0.7	33,100	0.73
		80/67	39,900	0.68	37,010	0.73	34,800	0.76	32,150	0.79	29,500	0.81
		75/63	37,900	0.71	34,727	0.75	32,300	0.78	29,600	0.82	26,900	0.86
		75/57	35,800	1.00	32,570	1.00	30,100	1.00	27,150	1.00	24,200	1.00
4SCU13LE142P-5	E*1P43	85/72	52,200	0.61	49,100	0.65	46,900	0.65	44,800	0.69	41,300	0.7
		80/67	48,300	0.68	44,200	0.73	42,300	0.75	39,200	0.77	36,400	0.79
		75/63	45,100	0.72	41,600	0.72	38,200	0.77	37,100	0.81	32,400	0.83
		75/57	40,300	1.00	38,200	1.00	35,500	1.00	34,000	1.00	32,200	1.00
4SCU13LE148P-5	E*1P49	85/72	61,100	0.63	57,870	0.65	55,400	0.66	52,000	0.69	48,600	0.71
		80/67	56,800	0.69	53,230	0.71	50,500	0.73	46,800	0.76	43,100	0.79
		75/63	53,300	0.72	49,447	0.75	46,500	0.77	42,800	0.80	39,100	0.83
		75/57	47,000	1.00	43,713	1.00	41,200	1.00	38,500	1.00	35,800	1.00
4SCU13LE160P-5	E*1P49	85/72	69,800	0.61	66,457	0.63	63,900	0.64	59,950	0.67	56,000	0.69
		80/67	65,400	0.68	61,490	0.70	58,500	0.71	54,600	0.74	50,700	0.77
		75/63	61,400	0.71	56,923	0.73	53,500	0.75	49,650	0.78	45,800	0.81
		75/57	45,400	1.00	46,760	1.00	47,800	1.00	45,600	1.00	43,400	1.00

All specifications and illustrations subject to change without notice and without incurring obligations.

FORM NO. 4SCU13LE-100 (09/2019)

Printed in the U.S.A.

Allied Air Enterprises Logo and Phone Number

	4SHP13LB 13 SEER Split System Heat Pump Product Specifications Product specifications and performance data for the Allied Air Enterprises 4SHP13LB 13 SEER Split System Heat Pump, detailing compressor, cabinet, coil, design, accessories, warranty, and comprehensive cooling and heating performance ratings.
	BCE3M & BCS3M Series Air Handler Installation Instructions Comprehensive installation guide for BCE3M and BCS3M series air handlers, covering safety precautions, unit dimensions, installation requirements, electrical connections, operation, maintenance, and warranty information.
	Installation and Maintenance Instructions for Allied Air 4SHP13 Series Split System Heat Pump Comprehensive guide for the installation, startup, operation, and maintenance of the Allied Air 4SHP13 Series Split System Heat Pump. Includes safety warnings, electrical wiring, refrigerant piping, charging procedures, and warranty information.
	95G2UHV Gas Furnace Installation Instructions Comprehensive installation instructions for the 95G2UHV Warm Air Gas Furnace, covering upflow, horizontal, direct vent, and non-direct vent configurations. Includes safety information, parts arrangement, building code compliance, and detailed installation procedures.
	Allied Air 7AH2AE Residential Air Handler Specifications Comprehensive product specifications, features, technical data, and installation guidelines for the Allied Air 7AH2AE series residential air handlers, covering capacities from 1.5 to 5 tons and optional electric heat up to 25 kW.
	Allied Air Enterprises 97G2V Two Stage Variable Speed Gas Furnace Specifications Explore the detailed specifications, features, and performance data for the Allied Air Enterprises 97G2V Two Stage Variable Speed Gas Furnace, including technical dimensions and operational capabilities.
	Allied Air Enterprises New Furnace Platform Accessory Specification Sheet Fall 2010 This document provides detailed specifications for the new furnace platform accessories from Allied Air Enterprises, including products from Armstrong Air, AirEase, Ducane, and Concord for Fall 2010. It covers various furnace models, their features, and corresponding catalog numbers, along with installation and accessory information.
	Allied Air Enterprises Equipment Limited Warranty This document outlines the limited warranty provided by Allied Air Enterprises for their heating and cooling equipment, including coverage details, exclusions, and procedures for claims. It covers both a standard limited parts warranty and an extended 5-year limited parts warranty for residential applications.

4SCU13LE 13 SEER SPLIT SYSTEM AIR CONDITIONER

COMPONENTS

DESIGN

ACCESSORIES

COMPRESSOR

CABINET

COILS

WARRANTY

NOTE

MODEL NUMBER GUIDE

PHYSICAL AND ELECTRICAL DATA

UNIT DIMENSIONS (IN.)

SOUND RATINGS

ACCESSORIES

REFRIGERATION DATA

COOLING PERFORMANCE WITH DTC¹

COOLING PERFORMANCE EXTENDED RATINGS

Related Documents