EseeCloud WiFi Bulb Camera Quick Guide

Interface Description

WIFI Bulb Camera Overview

A diagram of the WiFi Bulb Camera shows:

• Reset button: Located on the camera body. Long press for 5 seconds to restore factory settings. The camera will provide a voice prompt.
• SD card slot: For TF card insertion, enabling video storage and playback.
• Power supply: Power input, AC 110V-240V.

Software Installation

APP Download and Installation

Users can search for "EseeCloud (IP Pro, VR Cam)" on the APP store or Google Play, or scan the provided QR code to install the APP.

Note: For iOS systems, iOS 9.0 or above is required. For Android systems, Android 5.1 or above is required.

The EseeCloud APP icon is a blue square with a white camera lens symbol. The APP download QR code is a standard black and white QR code.

1. Step 1: If prompted to open certain permissions (such as location, message notification), click "Allow" (agree) during APP installation.
2. Step 2: Account Registration and Login:
   • Account Register: Open the APP, click "Register", enter your email or phone number to create an account.
   • Account Login: On the login interface, enter your account/phone number/email and the corresponding password, then click "OK" to log in.
   • Third-party Login: The APP supports third-party login. Click the relevant social software icon (e.g., Google, Facebook, Line) to complete authorization and log in.

Bluetooth Adding Process with Network

Important: Before adding a camera, ensure the Bluetooth function on your mobile phone is turned on and remains active during the adding process. If a prompt box appears for Bluetooth or Bluetooth authorization, follow the steps to enable it.

1. Step 1: After the camera is powered on, open the "EseeCloud" APP and click the "+" icon in the upper right corner of the "Device Group" interface to enter the device adding interface. If a permission prompt appears, click "Agree".
2. Step 2: The APP will automatically search for new devices. If a device is found, click the "Add" button next to "Network camera". If you do not see a pop-up device box, click "Scan to add" to scan the QR code on the camera body. A "Scan to add" screen shows a camera icon and text "Scan the device body code with your mobile phone to add".
3. Step 3: Enter the WiFi name and password on the distribution network screen. The screen shows "Choose Wi-Fi for your device" with options for "WIFI - 2.4G" and "WIFI - 5G".
4. Step 4: After successful network configuration, the system prompts you to enter the device name. Click "Next". A screen shows "Configure the device" with a checkmark and "The device is added successfully, please name your device".
5. Step 5: Users can choose to enable or disable message push notifications (e.g., Motion Detection Alert, APP push alert message) according to their preferences. Enabling is generally recommended.
6. Step 6: Congratulations, you have successfully connected the device.

Adding Camera by WiFi Configuration

1. Step 1: Open the APP, click the "+" icon in the middle of the interface to enter the scan code interface. The "Device Group" screen shows an "Add camera" button.
2. Step 2: Click "Camera scan code add" method.
3. Step 3: Check whether the camera light is blinking. Keep the camera powered on and check if its light is flashing. If the light is not flashing, long press the reset button to reset the camera. Click "Next".
4. Step 4: Select the WiFi that the camera needs to connect to, enter the password, and click "Next". The "WIFI Connection" screen allows selecting 2.4G/5G WiFi.
5. Step 5: Point the camera at the QR code that appears on the screen of the phone. The screen displays a large QR code with instructions to place the QR code 15-20cm away from the lens. A "Hear the prompt tone" button is also visible.
6. Step 6: After the network configuration is successful, set a name for the camera. A "Networking..." progress indicator shows 75% complete, followed by a "Configure the device" screen confirming success.

Help FAQ

Q1: Why is the pairing network unsuccessful?

1. Ensure the distance among the camera, router, and mobile phone is close enough during network configuration.
2. Verify that both 2.4G WiFi and 5G WiFi signals connected to the mobile phone are working correctly.
3. Check if the WiFi name and password entered are correct.
4. Long press the reset button for 5 seconds to restore the camera to factory settings, then try pairing again.

Q2: Why is there no playback?

1. Ensure the TF card has been inserted into the camera. Try turning the camera on/off.
2. Enter the camera settings menu to check the storage status. If the status is abnormal, click "Format the memory card". A screen shows "Local storage space" with "Used capacity: 3%" and "in good condition".

Q3: Why is the camera offline?

1. This may be caused by router WiFi signal interference or network issues. Power off and restart the optical modem, router, or camera.
2. If the camera is too far from the WiFi router, try moving the camera closer to the router.
3. If the WiFi password has been changed, try resetting the camera and pairing again.

Q4: Why does my phone not have an alarm push function or two-way audio?

1. Check your mobile phone permission settings and ensure that notification permission for the "EseeCloud" App is enabled. A screenshot shows "Notifications" settings with toggles for "Sounds & Haptics", "Focus", "Screen Time", and "Announce Notifications".
2. Open your phone's Settings > Apps and Notifications, select "Apps and Notification Management", find the "EseeCloud" app, and turn on all permissions.

After Service

1. EseeCloud appreciates customer purchase and support, and values feedback.
2. For questions about EseeCloud products, customers can contact them via:
   • Toll Free: +1 888 971 6718
   • Email: primefocus2021@outlook.com

Installation and Placement

WIFI Bulb Camera

The WiFi Bulb Camera is designed to be connected to an E27 connector for AC110V-240V, similar to a standard light bulb holder. A diagram shows the camera screwed into an E27 bulb holder on a ceiling.

Before operating this unit, please read these instructions carefully and save them for future use. The device supports 2.4G / 5G WiFi.

Bulb Camera Use Instruction Video

A QR code is provided for a bulb camera use instruction video. Scan this QR code to access the video guide.

QR code for instructional video.