SmallRig TRIBEX SE Hydraulic Tripod

Introduction

Thank you for purchasing SmallRig's product. Please read this Operating Instruction carefully and follow all safety warnings.

In the Box

• Tripod (1)
• Carrying Bag (1)
• Allen Wrench (1)
• Smartphone Holder (1)
• Operating Instruction (1)

Product Details

The tripod features a Video Head, Leg Angle Lock, X-Clutch Handle, Center Column, Hook, and Rubber Foot.

Key Components:

• Video Head: Provides smooth panning and tilting.
• Leg Angle Lock: Allows adjustment of leg angles for stability.
• X-Clutch Handle: For easy opening and closing of tripod legs.
• Center Column: For height adjustment.
• Built-in Allen Wrench: Conveniently stored for adjustments.
• Safety Pin: Prevents accidental detachment of the camera.
• QR Plate Locking Knob: Secures the quick release plate.
• Tilt Locking Knob: Locks the tilt movement of the head.
• Bubble Level: Ensures the tripod is level.
• Quick Release Plate: Allows fast mounting and dismounting of the camera.
• QR Plate Safety Button: Adds an extra layer of security for the quick release plate.
• Pan Bar Locking Knob: Locks the pan movement of the head.
• Detachable Pan Bar: Can be attached or detached as needed.
• Pan Locking Knob: Locks the base rotation.

Setup Tripod

Follow these steps to set up the tripod:

1. Extend the tripod legs to the desired angle.
2. Adjust the center column height if necessary.
3. Ensure all locking mechanisms are secured.

Fold X-Clutch Handle: The handle can be folded by rotating it 90 degrees.

Use Low Angle

1. Loosen the screw by 2 turns to detach the center column.
2. Reattach the head to the detached center column for low-angle shots.

Operating Altitude

The tripod offers a range of operating altitudes:

• Minimum height: 25.0cm / 9.8in
• Maximum height: 166.0cm / 65.3in
• Storage height: 72.0cm / 28.3in

The tripod can be extended to a maximum height of 138.0cm / 54.3in without the center column fully extended, and up to 166.0cm / 65.3in with the center column extended.

Specifications

Notes

1. Ensure the head and tripod locking status are normal before shooting.
2. Avoid use in sandy or dusty environments to prevent damage.
3. After using the short center column, ensure it is locked securely.
4. Maximum head payload: 6.0kg / 13.2lb (with center column raised, leg angle at 22°, height at 166.0cm / 65.3in).
5. Tripod head weight capacity can vary based on equipment type, lenses, accessories, and center of gravity.
6. Maximum tripod payload: 15.0kg / 33lbs (center column not raised, head detached, leg angle at 22°, height at 130.0cm / 51.2in).
7. After soaking in water, dry the tripod thoroughly before use.

Service & Warranty

Please keep your original receipt and guarantee card for warranty service. The dealer must have recorded the date of purchase and SN of the product.

After-sale Warranty Terms

• Electronic products (except V mount battery): 1-year warranty.
• V mount battery: 2-year warranty.
• Non-electronic products: 2-year warranty.

Note: In case of conflict between warranty period policy and local laws, local laws prevail.

This Warranty Does Not Cover

1. Failure to adhere to the "Operating Instruction" or "Warnings".
2. Product identification or SN label removed or defaced.
3. Product damage due to improper use.
4. Product damage due to unauthorized modification, disassembly, or repair.
5. Product damage due to force majeure events (fire, flood, lightning, etc.).

Warranty Mode

SmallRig will repair or replace products within the warranty scope based on specific failures. Repaired/replaced products/parts are entitled to the remaining warranty period.

Contact Information

• Contact online customer service of the shopping platform for repair service applications.
• Alternatively, apply for repair service via SmallRig's service email: support@smallrig.com.

Guarantee Card

Fill in the following details for the guarantee card:

• ID No.
• Item Name
• Purchase Date
• User Name
• Mobile
• Address
• Receipt

Manufacturer: Shenzhen Leqi Innovation Co., Ltd.
Address: Rooms 101, 701, 901, Building 4, Gonglianfuji Innovation Park, No. 58, Ping'an Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.

Consignor: Shenzhen LC Co., Ltd.
Address: Room 201, Building 4, Gonglianfuji Innovation Park, No. 58, Ping'an Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.

Compliance and Labeling

Standards: GB 4943.1-2022, GB/T 26572-2011

EC REP: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA, CASTELLANA 9144, 28046 Madrid, compliance.gavimosa@outlook.com

UK REP: Sea&Mew Accounting Ltd, Electric Avenue Vision 25, London, Enfield EN3 7GD, info@seamew.net

Certifications: CE, RoHS, Pass Certificate (合格证)

Environmental Labeling: Recyclable materials (PAP, Boîte 6, Papier 5, Sachet 3), Environmental labeling information.

Manufacturing Information: Made in China | 中国制造