SmallRig Aluminum Panoramic Ball Head 3034
Operating Instruction
Product Overview
The SmallRig Aluminum Panoramic Ball Head 3034 is constructed from durable aluminum, offering a solid and secure mounting solution. With a safety payload capacity of 5kg, it is ideal for amateur photographers using compact DSLRs, mirrorless cameras, smartphones, or action cameras. It is compatible with most photography tripods and monopods.
The ball head features accurate calibration for 360° panoramic rotation, essential for panoramic shooting. It also provides multi-angle adjustment with a -90°/+45° front tilt and -50°/+50° lateral tilt, supporting both horizontal and vertical shooting orientations. The included standard Arca-Swiss plate ensures quick mounting and dismounting of devices with compatible Arca-Swiss clamps.
Image Description: The SmallRig Aluminum Panoramic Ball Head 3034 is shown. It features a robust black aluminum body with bright red anodized knobs for locking and panning. The top has an Arca-Swiss compatible quick-release plate. The base is marked with degree increments for precise 360° rotation. A separate 3/8" to 1/4" screw adapter is also visible.
Safety Guidelines
- Environment: Do not use the product underwater, in extreme temperatures (e.g., freezing or direct heat), corrosive environments, or excessive dust. Dry metal parts immediately after liquid contact to prevent corrosion.
- Load Capacity: Do not exceed the maximum weight capacity indicated on the product. Overloading risks structural failure, deformation, or accidental drops.
- Cleaning & Maintenance: Clean surfaces with a dry, soft cloth. Avoid chemicals like alcohol or solvents. Ensure dry and ventilated conditions for long-term storage.
- Structural Integrity: Do not modify the product (e.g., drilling, cutting)—this compromises structural integrity and increases drop risks.
- Malfunctions: Stop use immediately if you notice deformation, unusual noises, or loose components, and contact support.
In the Box
- Panoramic ball head × 1
- 1/4" to 3/8" screw adapter × 1
- Guarantee Card × 1
Product Details & Features
Key components and features of the ball head:
- Arca-Swiss Style QR Plate: A quick-release plate designed for secure camera mounting.
- Ball Head Knob: A prominent red knob that, when tightened, locks the ball joint in place, securing the camera's position.
- Panning Knob: Another red knob, typically located on the base, used to control the smooth 360° horizontal rotation of the ball head.
- 360° Panning Dial: A circular scale on the ball head's base, marked with degrees from 0 to 360, allowing for accurate and repeatable panoramic movements.
- 3/8" to 1/4" Screw Adapter: A metal adapter with a 3/8"-16 male thread on one end and a 1/4"-20 female thread on the other, used to adapt mounting hardware.
Image Description: Close-up views highlight the Arca-Swiss Style QR Plate, the Ball Head Knob, the Panning Knob, and the 360° Panning Dial, showcasing their design and function. The 3/8" to 1/4" Screw Adapter is also detailed.
360° Panoramic Photography
The panning base is equipped with a scale, specifically designed for horizontal movement. This feature assists photographers in capturing panoramic scenery images by enabling precise and controlled panning.
Image Description: An illustration demonstrates 360° panoramic photography. A camera is mounted on the SmallRig ball head atop a tripod. The ball head's panning base, featuring a degree scale, is highlighted as facilitating precise horizontal movement for capturing seamless panoramic images. A small inset shows four distinct frames that could be stitched together for a panorama.
Camera Mounting Examples
The ball head is versatile for various camera setups:
Image Description (Top): A camera is shown mounted vertically on the SmallRig ball head, attached to a tripod. The rear of the camera is visible.
Image Description (Bottom): A camera equipped with a telephoto lens is mounted horizontally on the SmallRig ball head, which is attached to a tripod. The side of the camera and lens are visible.
Parameters
| Product Dimensions: | 75 x 68 x 58mm |
|---|---|
| Package Weight: | 228±5g |
| Package Dimensions: | 90 x 85 x 50mm |
| Net Weight: | 194±5g |
| Material(s): | Aluminum Alloy |
| Top attachment: | 1/4"-20 screw |
| Bottom attachment: | 3/8"-16 screw |
| Ball head safety payload: | 5kg |
| Front tilt: | -90°/+45° |
| Lateral tilt: | -50°/+50° |
| Base diameter: | 38mm |
| Panoramic rotation: | 360° |
Image Description: A professional camera with a large telephoto lens is mounted on the SmallRig ball head, which is supported by a carbon fiber tripod. The setup is shown from the side.
Certifications include RoHS, CE, and recycling symbols (e.g., paper recycling). The product is Made in China.
Manufacturer Information
Manufacturer: Shenzhen Leqi Innovation Co., Ltd.
Address: Rooms 101, 701, 901, Building 4, Gonglianfuji Innovation Park, No. 58, Ping'an Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
Consignor: Shenzhen LC Co., Ltd.
Address: Room 201, Building 4, Gonglianfuji Innovation Park, No. 58, Ping'an Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
Manufacturer Email: support@smallrig.com
