Introduction
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
Model: T8200
Document Version: 51005001514 V03
Image of the eufy Security Video Doorbell 2K (Wired) and its accompanying chime unit.
Table of Content
- What's in the Box
- What's Required for Installation
- How the System Works
- EufySecurity App Installation
- Video Doorbell Installation
- Safety
- Customer Service
What's in the Box
- Video Doorbell 2K (Wired) Model: T8200
- FCC ID: 2AOKB-T8200
- IC: 23451-T8200
- Screw Hole Positioning-Card
- Mounting Bracket (Attached to 15° Mounting Wedge)
- 15° Mounting Wedge (Optional)
- Extension Wires and Wire Nuts (Optional)
- Jumper for Existing Chime (The second one is optional)
- Screw Packs (Anchors are optional)
- Doorbell Detaching Pin
- Doorbell Chime Model: T8740
- Doorbell Chime Power Pin
- Quick Start Guide
What's Required for Installation
- Phillips-Head Screwdriver (User provides it)
- Power Drill with 1/4" (6.35mm) Drill Bit (User provides it)
How the System Works
The Video Doorbell system includes 2 parts: the video doorbell at your porch and an electronic chime plugged into an indoor power socket. The video doorbell is powered by existing doorbell wires. To ensure sufficient power from the doorbell circuit, users need to bypass the existing doorbell chime on the circuit.
Diagram showing the system setup: A video doorbell is mounted outside a house at the porch. An electronic chime unit is plugged into an indoor power socket. The doorbell is powered by existing doorbell wires, and the diagram indicates a connection to bypass the existing doorbell chime.
EufySecurity App Installation
Search for "EufySecurity" on the App Store or Google Play and install the App on your phone.
Download on the App Store
Get it on Google Play
Register or log into the App. Add the video doorbell (Wired) and scan the QR code for the later installation process. The QR code can be found on the back of the video doorbell and on the back of the documentation box.
QR code for adding the video doorbell in the EufySecurity App.
Deal with the physical installation first, then come back to the App for in-App setup.
Video Doorbell Installation
Note: Make sure you have installed the EufySecurity App and scanned the QR code before starting to handle the doorbell installation.
Step 1: Ring the existing doorbell
Ring the existing doorbell to make sure it's working and locate the place of your existing chimes in the house.
Step 2: Shut off power
Shut off the master circuit breaker in your house. Turn the lights in your home on/off to confirm the electricity in your house is properly shut off.
Diagram showing a circuit breaker panel with the master breaker being switched OFF.
Note: Always be careful when handling electricity wiring. If you're not comfortable to do it yourself, consult a qualified electrician.
Step 3: Bypass the doorbell chime
Find the doorbell chime in your house, then remove the cover and find the screw terminals with TRANS and FRONT markings. Use the provided jumper for existing chime to connect the two terminals. This bypasses the doorbell chime and will not affect the normal operation of the circuit.
Note:
- The video doorbell requires bypassing the existing chime first to get sufficient power. Without this step, the video doorbell may still power on but will operate unstably.
- In most cases, the existing doorbell circuit looks like the chart below. Find the existing doorbell chime in your house, remove the cover, and take a photo of the wire connection in case you need to reconnect it.
- Use the provided jumper to connect FRONT and TRANS terminals to bypass the chime on the circuit. Do not remove the original wire connecting to the chime. If your doorbell chime has different markings or you have multiple chimes, refer to the help section in the App for custom wiring instructions or consult a qualified electrician.
- When the jumper is in place, the existing chime will not sound anymore.
What are required: Jumper for existing chime / Phillips-Head Screwdriver
Diagram illustrating the existing chime in the house with terminals labeled TRANS and FRONT. It shows the provided jumper connecting these two terminals to bypass the chime.
Step 4: Remove the old doorbell button
Remove the existing doorbell button at the front door. Pull the two wires out carefully when removing the old doorbell. Straighten the wire ends if necessary.
What's required: Phillips-Head Screwdriver
Diagram showing the existing doorbell button on the wall and two wires being pulled out.
Step 5: Determine mounting position
Determine the mounting position of the doorbell. Check if you can reuse the existing holes on the wall. Use the Screw Hole Positioning-Card to mark the screw holes in the place of the existing doorbell button. Place it at least 1.2m (48") high from the ground for optimal viewing results, then drill holes (Use 1/4" (6.35mm) drill bit).
What are required: Power Drill with 1/4" (6.35mm) Drill Bit / Screw Hole Positioning-Card
Diagram showing how to determine the mounting position for the doorbell, indicating a recommended height of at least 1.2m (48 inches) from the ground. It also shows the use of a Screw Hole Positioning-Card for marking.
Optional: Use the 15° mounting wedge as a supplementary mounting bracket if you wish to see more on a specific side.
Diagram comparing mounting without a 15° wedge and with a 15° wedge, illustrating how the wedge changes the viewing angle of the doorbell.
Step 6: Install anchors (if needed)
Use the anchors provided when installing in materials such as stucco, brick, or concrete. There is no need to use anchors if you are installing on a wooden doorframe.
What's required: Anchors
Diagram showing screw packs with anchors for mounting into stucco, brick, or concrete.
Step 7: Mount the bracket
Lead the two doorbell wires through the central square hole on the bracket before starting mounting. Insert the two screws provided through the screw holes or through the 15° mounting wedge (install the mounting bracket to the 15° mounting wedge first), and fasten the screws tightly.
What are required: Mounting Bracket / Screw Packs / 15° Mounting Wedge (Optional) / Phillips-Head Screwdriver
Diagrams showing how to attach the mounting bracket to the wall, with and without the 15° mounting wedge.
Step 8: Connect the wires
Connect the wires to the two terminals at the back of the doorbell, then tighten the terminal screws. Wire can connect to any terminal as the electric current is alternating current.
Note: To prevent short-circuit, make sure the wires are not touching each other after connecting them to the terminals. If the wires are too short, use the extension wires and wire nuts provided to make them longer. Use electrical wiring tape to secure the connection if the wall doesn't have space for wire nuts.
What are required: Extension Wires and Wire Nuts (Optional) / Video doorbell / Phillips-Head Screwdriver
Diagram showing the back of the video doorbell with two terminals. It illustrates connecting the doorbell wires to these terminals.
Step 9: Attach the doorbell
There are 2 thermal conductive pads on the mounting bracket. They are used to conduct heat from the video doorbell to the metal bracket. Remove the films on the thermal conductive pads before you mount the doorbell.
Hook the doorbell on top of the mounting bracket and then snap the doorbell bottom to the bracket. You may hear a "click" sound.
Use the doorbell detaching pin provided if you wish to detach the doorbell from the mounting bracket. Press and hold the hole on the bottom of the doorbell and then lift its bottom to take it off.
The detaching pin has a magnet pad on the black-color side. Stick it on an iron surface where you can find it easily.
What's required: Doorbell detaching pin
Diagram showing the doorbell detaching pin and how to use it to remove the doorbell from the bracket by pressing and holding a hole on the bottom.
Step 10: Turn power back on
Switch the master circuit breaker in your house back to ON.
Diagram showing a circuit breaker panel with the master breaker being switched ON.
Step 11: Connect to Wi-Fi
Wait until the doorbell ring flashes yellow. Then follow the on-screen instructions in the EufySecurity App to connect the video doorbell to your home Wi-Fi.
Illustration of the eufy Security Video Doorbell with a yellow flashing light.
Step 12: Pair the chime
Follow the on-screen instructions in the EufySecurity App. Install the doorbell power pin to the doorbell chime and then pair it to your video doorbell.
Note: One video doorbell can link up to 4 electronic chimes. Use the volume and music buttons on the side of the electronic chime to adjust the volume and ringtone.
What are required: Doorbell chime / Doorbell chime power pin
Diagram showing the doorbell chime and its power pin, with instructions to plug the pin into the chime and indicating the correct orientation ('THIS SIDE UP').
Safety
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The minimum separation distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party:
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone: 1-206-383-8247
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the website www.eufylife.com
Do not use the Device in environments at too high or too low temperatures, never expose the Device under strong sunshine or too wet environment.
The suitable temperature for T8200 is -20°C - 50°C.
The suitable temperature for T8740 is 0°C - 45°C.
RF Exposure Information
The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use products that maintain a 20cm distance between the device and human body.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Wi-Fi Operating Frequency Range: 2412~2472MHz for EU; Wifi Max Output Power: 19dBm
Bluetooth Operating Frequency Range: 2402~2480MHz; Bluetooth Max Output Power: 8dBm
433MHz Frequency Range: 433.92MHz; 433MHz Max Output Power: 10dBm
The following importer is the responsible party (contact for EU matters only):
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom
This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol ♻️ means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matière d'exposition RF.
Customer Service
Warranty
12-month limited warranty
Call Us
- United States: +1 (800) 988 7973 (Mon-Fri 9AM-5PM PT)
- United Kingdom: +44 (0) 1604 936 200 (Mon-Fri 6AM-11AM GMT)
- Germany: +49 (0) 69 9579 7960 (Mon-Fri 6:00-11:00)
Email Us
Customer Support: support@eufylife.com
Anker Innovations Limited
Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
[Facebook] @EufyOfficial
[Twitter] @EufyOfficial
[Instagram] @eufyofficial
