eufy Security Video Doorbell Dual (Battery)

1 WHAT'S INCLUDED

For Video Doorbell Installation:

• eufy Security Video Doorbell Dual (Battery) - Model: T8213
• Mounting Bracket
• 15° Mounting Wedge (Optional)
• Screw Hole Positioning Card
• Screw Pack
• QSG (Quick Start Guide)
• Extension Wires and Wire Nuts (Optional)
• micro-USB Charging Cable
• Detaching Pin

For HomeBase 2 Installation:

• HomeBase 2 - Model: T8010X
• Power Adapter for HomeBase 2 (Note: Power plug may vary by region)
• Ethernet Cable for HomeBase 2

2 PRODUCT OVERVIEW

Video Doorbell

Front View:

1. Motion Sensor ?
2. Microphone ?
3. Primary Camera Lens ?
4. Ambient Light Sensor ☀️
5. LED Ring / Doorbell Button ?
6. Secondary Camera Lens ?
7. Speaker ?

Rear View:

1. Detaching Mechanism ➡️
2. Micro USB Charging Port ?
3. SYNC/RESET Button ?
4. Power Terminals for Existing Doorbell Wires (Optional) ⚡

HomeBase 2

1. Status LED ?
2. Speaker ?
3. Power Port ?
4. USB Port ?
5. Ethernet Port ?
6. SYNC/ALARM OFF Button ?
7. Reset Button ?

Operation

3 HOW THE SYSTEM WORKS

The video doorbell system consists of two main parts: the video doorbell at your door and the HomeBase in your house. The video doorbell detects motion and allows you to answer the door from anywhere. The HomeBase stores video clips locally. When someone rings the doorbell, occupants in the house are notified.

Doorbell Chime ?

Video Doorbell Dual (Battery) ?

HomeBase 2 ?

4 STEP 1 CONNECTING THE HOMEBASE

Connect HomeBase 2 to the Internet:

1. Power on the HomeBase 2. Use the provided Ethernet cable to connect the HomeBase 2 to your home router ?.
2. The LED indicator ? will turn blue (this may take up to 1 minute) when the HomeBase 2 is ready for setup.

5 STEP 2 SETTING UP THE SYSTEM

Download the eufy Security app from the App Store ? (iOS devices) or Google Play ▶️ (Android devices).

Sign up for a eufy Security account ?, then follow the on-screen ?️ instructions to complete the setup.

6 STEP 3 DETERMINING THE POWER OPTION

Option 1 - Battery Powered

1. If you do not have existing doorbell wiring, use the built-in battery. This offers flexibility in doorbell placement and easy mounting.
2. When the doorbell battery level is low ?, you will need to detach and charge it.
3. If you choose this option, proceed to STEP 4 FINDING A MOUNTING SPOT.

Battery Life Note: Battery life varies with usage. Under typical conditions (e.g., 10 events per day, 20-second recordings), the battery can last up to 6 months ?.

Option 2 - Doorbell Wire Powered

1. If you have existing and working doorbell wiring, the doorbell will be powered constantly by the wires, eliminating the need for detachment and charging.
2. Mounting position may be limited due to the wire connection.
3. If you choose this option, jump to APPENDIX 3 POWERING THE DOORBELL WITH EXISTING DOORBELL WIRES.

Required Wiring: 8 - 24V AC Doorbell Wiring ⚡

7 STEP 4 FINDING A MOUNTING SPOT

Find a Mounting Spot:

Take the video doorbell to your front door and check the live view ?️ on the app simultaneously. Find a location that provides the desired field of view.

Consider the following factors ⚖️:

1. Check if you can reuse existing holes ?️ and anchors ⚓ on the wall ? or door frame ?.
2. If placing the doorbell near a side wall ?, ensure the wall does not obstruct the field of view ?️. Otherwise, IR light ? may reflect, causing blurry night vision ?️.
3. If drilling mounting holes ?️ for the first time, the recommended mounting height ? is 48 inches / 1.2 meters from the ground ?.
4. To adjust the angle ?, use the 15° mounting wedge 쐐 as a supplementary mounting bracket ?.

Diagram Description: Shows recommended heights for mounting the doorbell, with and without the 15° wedge. The diagram illustrates a person's height (1.76m / 5'9") and indicates mounting heights of 1m (40") and 1.2m (48") from the ground. It also shows the doorbell positioned on a wall relative to a door, with and without the wedge.

Place the screw hole positioning card ? against the wall ? to mark the position ?.

8 STEP 5 MOUNTING THE BRACKET

Mount the Doorbell on a Wooden Surface ?

If mounting on a wooden surface, predrilling pilot holes ?️ is not required. Use the provided screws ? to secure the mounting bracket ? to the wall ?. The screw hole positioning card ? indicates the screw hole positions ?.

Tools Needed: Phillips-Head Screwdriver ? (not provided), Mounting Bracket ?, 15° Mounting Wedge 쐐 (Optional), Screw Packs ?.

Diagram Description: Illustrates mounting a bracket on a wall. Shows the bracket attached to the optional wedge, and the bracket mounted directly to the wall. Spare screws and anchors are included.

Mount the Doorbell on Surfaces Made Out of Hard Materials ?

1. If mounting on hard materials like brick ?, concrete ?, or stucco, drill 2 holes ?️?️ through the screw hole positioning card ? using a 15/64" (6mm) drill bit ?️.
2. Insert the provided anchors ⚓, then use the provided long screws ? to secure the mounting bracket ? to the wall ?.

Tools Needed: Power Drill ?️, 15/64" (6mm) Drill Bit ?️, Mounting Bracket ?, 15° Mounting Wedge 쐐 (Optional), Screw Packs ?.

Diagram Description: Shows drilling holes into a wall using a power drill and drill bit, then inserting anchors. It then illustrates mounting the bracket (with or without the wedge) onto the wall using screws. Spare screws and anchors are included.

9 STEP 6 MOUNTING THE DOORBELL

Mount the Doorbell ?:

Align the doorbell ? at the bottom ⬇️, then move it into place at the top ⬆️. Press the doorbell down until it clicks ?.

You're all set! ✅

If you wish to detach ➡️ or recharge ? the doorbell, please refer to the relevant sections.

10 APPENDIX 1 DETACHING THE DOORBELL

Detach the Doorbell ?:

1. Use the provided doorbell detaching pin ? to detach the doorbell ? from the mounting bracket ?.
2. Press the pin ? into the pinhole ?️ on top of the doorbell ⬆️, then lift the top for removal ➡️.

Tools Needed: Doorbell Detaching Pin ?.

11 APPENDIX 2 RECHARGING THE DOORBELL

Recharge the Doorbell ?:

• LED Indicator: Flashing Green ? (Charging), Green ? (Fully charged ✅).
• Charging Time: Approximately 6 hours ⏰ from 0% to 100%.

12 APPENDIX 3 POWERING THE DOORBELL WITH EXISTING DOORBELL WIRES

3.1 Verify whether the doorbell wires are working

1. Ring the existing doorbell ? to check if it is functioning. If it does not ring, the wires may be defective ❌. Power the doorbell using its battery ? or consult an electrician ?‍ electrician to fix the wires 〰️.
2. Shut off power ⚡ at the breaker ⚡. Turn lights ? on/off in your home ? to confirm the electricity is properly shut off ✅.

Safety Note: Always be careful ⚠️ when handling wires 〰️. If you are not comfortable installing it yourself, have a qualified electrician ?‍ electrician perform the installation ?️.

3.2 Detach the Existing Doorbell Button

If you have existing doorbell wiring 〰️:

1. Remove the existing doorbell button ? using a Phillips-head screwdriver ? (not provided).
2. Carefully pull out the two wires 〰️〰️ when removing the button ?. Straighten the wire ends 〰️ if necessary ✅.

Tools Needed: Philips-Head Screwdriver ? (Not provided).

3.3 Find a Mounting Spot

When determining the mounting position ? of the doorbell ?, consider these factors ⚖️:

1. Check if you can reuse existing holes ?️ and anchors ⚓ on the wall ? or door frame ?.
2. If drilling mounting holes ?️ for the first time, the recommended mounting height ? is 48 inches / 1.2 meters from the ground ?.
3. To adjust the angle ?, use the 15° mounting wedge 쐐 as a supplementary mounting bracket ?.

Diagram Description: Similar to Step 4, showing recommended heights and doorbell positioning relative to a door and wall, with and without the 15° wedge.

Place the screw hole positioning card ? against the wall ? to mark the position ?.

3.4 Mount the Bracket

On a Wooden Surface ?:

If mounting on a wooden surface, predrilling pilot holes ?️ is not required. Use the provided screws ? to secure the mounting bracket ? to the wall ?. The screw hole positioning card ? indicates the screw hole positions ?.

Tools Needed: Phillips-Head Screwdriver ? (Not provided), Mounting Bracket ?, 15° Mounting Wedge 쐐 (Optional), Screw Packs ?.

Diagram Description: Illustrates mounting a bracket on a wall. Shows the bracket attached to the optional wedge, and the bracket mounted directly to the wall. Spare screws and anchors are included.

On Surfaces Made Out of Hard Materials ?:

If mounting on hard materials like brick ?, concrete ?, or stucco, drill 2 holes ?️?️ through the screw hole positioning card ? using a 15/64" (6mm) drill bit ?️. Insert the provided anchors ⚓, then use the provided long screws ? to secure the mounting bracket ? to the wall ?.

Tools Needed: Power Drill ?️, 15/64" (6mm) Drill Bit ?️, Mounting Bracket ?, 15° Mounting Wedge 쐐 (Optional), Screw Packs ?.

Diagram Description: Shows drilling holes into a wall using a power drill and drill bit, then inserting anchors. It then illustrates mounting the bracket (with or without the wedge) onto the wall using screws. Spare screws and anchors are included.

3.5 Connect the Doorbell Wires to the Doorbell

Connect the wires 〰️ to the terminals ⚡ at the back of the doorbell ?, then tighten the terminal screws ?. Wires can connect to either terminal.

Tools Needed: Extension Wires and Wire Nuts ? (Optional), Video Doorbell ?, Philips-head Screwdriver ?.

Notes:

• To prevent short-circuiting ⚡, ensure wires 〰️ do not touch each other ?? after connecting them to the terminals ⚡.
• If wires 〰️ are too short, use the provided extension wires and wire nuts ? ? to lengthen them. Use electrical wiring tape ? if there is insufficient space for wire nuts ? on the wall ?.

3.6 Mount the Doorbell on the Bracket

Align the doorbell ? at the bottom ⬇️, then move it into place at the top ⬆️. Press the doorbell down until it clicks ?.

3.7 Restore Power

Switch the master circuit breaker ⚡ back to ON ⚪.

You're all set! ✅ If you wish to detach ➡️ or recharge ? the doorbell, please refer to the corresponding sections.

13 NOTICE

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference ❌〰️, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning ⚠️: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note ?: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation ?. This equipment generates, uses, and can radiate radio frequency energy ?. If not installed and used according to instructions ?, it may cause harmful interference to radio communications ?. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception ??, which can be determined by turning the equipment off ⚫ and on ⚪, the user is encouraged to try to correct the interference ?️ by one or more of the following measures:

• Reorient or relocate the receiving antenna ?.
• Increase the separation ➕↔️ between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different ?⚡↔️ from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician ?‍? for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions ?. The minimum separation distance is 20cm ?.

Notice: Shielded Cables ?️

All connections to other computing devices must be made using shielded cables 〰️ to maintain compliance with FCC regulations.

Importer:

• Company Name: POWER MOBILE LIFE, LLC ?
• Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004 ?
• Telephone: 1-800-988-7973 ?

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference ❌〰️, and (2) this device must accept any interference, including interference that may cause undesired operation.

(French translation provided in original document)

This Class B digital apparatus complies with Canadian ICES-003.

(French translation provided in original document)

IC RF Statement:

When using the product, maintain a distance of 20cm ? from the body to ensure compliance with RF exposure requirements.

(French translation provided in original document)

Customer Service

• Warranty: 12-month limited warranty ?️ 12 ?
• Call Us:
  • United States ??: +1 (800) 988-7973 (Mon-Fri 9AM-5PM PT) ?
  • United Kingdom ??: +44 (0) 1604 936 200 (Mon-Fri 6AM-11AM GMT) ?
  • Germany ??: +49 (0) 69 9579 7960 (Mon-Fri 6:00-11:00) ?
• Email Us: Customer Support: support@eufylife.com ✉️

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong ?

Follow us on social media: @EufyOfficial ?