QLT VibroPulse Pro Massage Device

Product Overview

The QLT VibroPulse Pro is a foot and leg massager designed to provide a stimulating and relaxing massage experience. It features Shiatsu massage rollers and multiple programs and speed settings.

Safety Warnings

Read the instruction manual carefully before using the VibroPulse Pro for the first time. Always place the device on a flat, stable surface. Ensure children use the device only under adult supervision. Keep the device away from water and moisture. If the power cable is damaged, it must be replaced by the manufacturer or an authorized service center. Unplug the device after use. Consult a doctor before using this product if you are pregnant, have a pacemaker, an implant, suffer from diabetes, have a circulatory disorder, or have health concerns. Elderly and infirm individuals should also consult their doctor. Avoid direct skin contact if friction causes pain. Discontinue use immediately if discomfort or pain is experienced. Do not use the product before bedtime as it has a stimulating effect. To prevent short circuits, connect the device correctly and keep it away from metal objects, waste, and water. Do not place other objects on the massager. If the power cord is damaged, it must be replaced by a qualified person. Do not use the device on wet skin to reduce the risk of electric shock. Keep the product away from moisture. Children aged eight and over, and individuals with reduced physical, sensory, or mental abilities, or lack of experience and knowledge, may use the device if supervised or instructed on safe use and potential dangers. Children should not play with, clean, or maintain the device without supervision. Keep the device and its cable out of reach of children under eight and pets. Always sit while using the massager to avoid injury. Never stand on the unit or use it forcefully. Do not attempt to disassemble or repair the product; repairs should only be performed by qualified technicians.

Product Description

Control Panel

• 1. VIBROPULSE PRO main unit
• 2. Shiatsu massage rollers
• 3. Foot pads
• 4. Power plug
• 5. Power adapter
• 6. Control power
• 7. Display area
• 8. ON/OFF button
• 9. Programming button (Programme) P
• 10. Start button
• 11. Stop button
• 12. Button + (Time/Speed increase)
• 13. Button - (Time/Speed decrease)

Remote Control

• 14. Remote Control
• 15. Button + (Speed increase)
• 16. Button + (time increase)
• 17. Programme button P
• 18. Button - (time decrease)
• 19. Button - (Speed decrease)
• 20. Start and stop button
• 21. ON/OFF button

The set contains:

• 1. VIBROPULS PRO main unit
• 2. Remote control
• 3. Instruction manual in 4 languages
• 4. Power adaptor

Instructions for Use

Operating Features

Speeds from 1 to 20. Ten specifically designed programs.

Note

The device is designed for use on the sole of the foot, legs, and back. Do not use it on the waist, neck, or other body parts not described in this manual or for purposes other than those specified in this manual and the exercise guide.

Operating Instructions

1. Place the unit (1) on a flat, level surface.
2. Plug one end of the adapter (5) into the mains and the other into the power jack (4).
3. The functions of the VibroPulse Pro can be selected on the control panel on the device or on the remote control (14). The remote control uses 2 CR203 batteries (included). Insert them into the battery compartment following the polarity marks.
4. To turn the device on and off, press the ON/OFF button (8).
5. When the device is on, press the “P” button (17) on the remote control to choose one of the 8 automatic programs (P1-P8). Press the “Programme” button (17) on the remote control to choose one of the 2 manual programs (HO and H1). To choose a program on the device, press the “P” button (7). This button switches between automatic and manual programs. The selected setting is shown on the display (7).
6. Refer to the program table for program details.
7. To start and stop the chosen program, press the Start/Stop button (20) on the remote control or the Start button (10) on the device.
8. It is not possible to set the speed time on automatic programs.
9. For manual programs (HO and H1), you can set a time from 1 to 10 minutes before starting. Use the “More Time” (T+) button (16) or the unit's O button (12) to increase time, and the “Less Time” (T-) button (18) or the unit's O button (13) to decrease time.
10. Once the time is set, press the Start/Stop button (20) on the remote control or the Start button (10) on the device. When the program begins, you can adjust the speed from 1 to 15 at any time using the “More Speed” (S+) button (15) or the “Less Speed” (S-) button (19).
11. To turn off the device, first press the Start/Stop button (20) on the remote control or the stop button (11) on the device. Then press the ON/OFF button (21) on the device to turn it off completely.
12. Disconnect the device from the mains after use.

Program Table

Automatic Programs

• P1: Vibration only. Intensity levels: 6-15. Time: 10 minutes.
• P2: Vibration and vibration + massage. Sequence: 1 min vibration, 2 min vibration + massage, 3 min vibration, 4 min vibration + massage, 5 min vibration, 6 min vibration + massage, 7 min vibration, 8 min vibration + massage, 9 min vibration, 10 min vibration + massage. Intensity levels: 9-15. Time: 10 minutes.
• P3: Vibration only. Intensity levels: 9-15. Time: 10 minutes.
• P4: Vibration and vibration + massage. Sequence: 2 min vibration, 2 min vibration + massage, 3 min vibration, 3 min vibration + massage. Intensity levels: 9-15. Time: 10 minutes.
• P5: Vibration only. Intensity levels: 12-19. Time: 10 minutes.
• P6: Vibration + massage. Intensity levels: 12-15. Time: 10 minutes.
• P7: Vibration and vibration + massage. Sequence: 2 min vibration, 2 min vibration + massage, 3 min vibration, 3 min vibration + massage. Intensity levels: 12-18. Time: 10 minutes.
• P8: Vibration + massage. Intensity levels: 12-18. Time: 10 minutes.

Manual Programs

• HO: Manual programs, vibration only. Intensity levels: 1-20. Time: 10 minutes.
• H1: Manual programs, vibration + massage. Intensity levels: 1-20. Time: 10 minutes.

Cleaning

Always unplug the device from the mains before cleaning. Wipe the device and foot pads (3) with a damp cloth and mild soap. Do not use abrasive or corrosive cleaners. The foot pads can be removed for easy cleaning (3).

Technical Specifications

• Input: 24V
• Power: 30W

Adapter Technical Specifications

• Input: 100 - 240 V

Warranty

This product is covered by a warranty against manufacturing defects, subject to the time periods stipulated by the legislation in force in each country.