SuperFish Smart-Heater
100W-200W-300W-500W
Installation
- Mount the switch/sensor and holder on the wall and install the Smart-Heater in the aquarium.
- Before plugging the Smart Heater into a socket, wait 5 minutes to allow the thermostat to acclimatize with the temperature of the aquarium water.
- After 5 minutes, plug the Smart Heater into a socket, ensuring that water or splashes of water cannot reach the socket.
- To set the temperature, click the switch to the desired setting. The minimum setting is 17°C, and the maximum setting is 34°C.
- Install the heater at a minimum depth as indicated on the heater. The maximum operating depth is 80 cm.
Diagram Description: The diagrams illustrate correct and incorrect installation depths. The first diagram shows a correctly placed heater with a green checkmark (✓). The second diagram shows an incorrectly placed heater with a red cross (✗).
Maintenance
Dirt, lime deposits, or algae can accumulate on the glass of the Smart-Heater. Clean the Smart-Heater regularly using a sponge and a descaling agent. After cleaning, rinse thoroughly with tap water before placing it back in the aquarium.
Product Specifications
| Model | Aquarium Size | Length |
|---|---|---|
| Smart Heater 100W | 30-75 L | 27 cm |
| Smart Heater 200W | 75-125 L | 27 cm |
| Smart Heater 300W | 125-200 L | 27 cm |
| Smart Heater 100W | 200-350 L | 30 cm |
